Replacement Tomos A3 50cc 38mm cylinder head. Black chipped paint but good condition. Tomos # 217123
Recommended Accessories:A3 Stock Cylinder38mm PistonSpark PlugsA3 50cc Top End Gasket SetComplete A3 Gasket KitL17 Case BearingEngine Oil Seal...
10 pin stock crankshaft for tomos A3 mopeds. Recommended Accessories:A3 Stock Cylinder & 38mm PistonA3 70cc Reed Valve Cylinder Kit L17 Case BearingEngine Oil Seal SetPost 1986 Crank Bearing and Seal set
Cast iron 38mm 50cc piston port cylinder for Tomos A3 powered mopeds. Pretty rough ports but will get that old A3 up and running or clean / port for a stock performance upgrade.*This is for the cylinder only. Recommended Accessories:A3 Stock...
Tomos A35 70cc Complete Performance Package
This kit is for all Tomos mopeds with the A35 engine, Targa, Targa LX, Sprint,Colibri, Classic TT, etc. Will not fit the Revival without modification to the exhaust... Easily increase top speed and mid-range...
Replacement piston ring set Tomos A3 mopeds. Fits Puch (except hi-torque late models with L-ring upper), Sachs 504, 505 1A,1B (both) and 1C,1D (lower only) Comes with two rings. 38mm x 2mm GI Always measure and compare before ordering. Tomos # 203300
NSK L17 brass bearing. Used For Tomos A3 crank cases. Also used in Puch ZA50 engines on the magneto side(left.)**Be sure to compare before purchasing.Dimensions:17mm I.D.40mm O.D.10mm WidthTomos # 044370
Universal Cylinder stud set. Includes washers and nuts. Nuts have convenient cap to prevent rust. Will fit Tomos cylinder studs for A35 and A3
4 x 7mm x 115mm cylinder Studs
4 x 7mm Washers
4 x 7mm Nuts w/...
50cc Aluminum head gasket for Tomos with A3 and A35 Engines as well as Puch mopeds with E50 Engines.
Dellorto brand oil injection pump for Tomos mopeds. Will fit A35 and A55 engines. Please be sure to compare yours before purchasing.
*Includes only whats in the picture.
Tomos # 236513 or 217310
Airsal 44mm 70cc piston kit with 10mm wrist pin for Airsal 44mm cylinder kit.
44mm A3 Airsal Cylinder Kit
Airsal 44mm cylinder head for your Airsal 70cc kit.
Fits the Tomos A55, A3, A35 and even Puch with 44mm -45mm cylinder kits.
NOS Original stock 38.5mm piston kit for Tomos A35 mopeds.
12mm wrist pindistance from top (not including crown) to center of wrist pin opening = 23mmtotal length (including crown) = 50mm
Tomos # 223747
Racing wrist pin needle bearing for the cranshaft connecting rod, commonly referred to as the con rod.
This bearing will fit: Honda NSR50, NS-1, NS50F, MT50, MB5, MB50, MTX50, X8R, SFX, Bali.Kymco DJY50, KB, K12, Heroism, Top Boy, Dink.Piaggio...
Airsal 44mm 70cc cylinder kit with 10mm wrist pin for your A3 powered Tomos. Finally an easy solution for A3 performance.
This kit includes the cylinder, piston, rings, wrist pin, clips, gaskets, exhaust studs, reed block, and reeds...
NOS original Tomos wrist pin bearing for the cranshaft connecting rod, commonly referred to as the con rod.
This bearing will fit Tomos A35, A55 Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing.
12 x 15 x 15 12= I...
New old stock 12mm wrist pin.
12mm Diameter x 30.9mm Long
This is good on Puch and Tomos 12mm con rods. Please measure and be sure you need this.
*Might need a polish from years in a bag on the self but, no pitting, no scrapes, no issues...