NOS starter clutch adjuster nut for Puch 2-speed ZA50 engines.*This is the adjuster nut only, as pictured.
The original P60-MT carburetor used on many on the Avanti mopeds such as the Super Sport. Uses 60mm air filters.Made in India by Pacco Dimensions:Intake with shim ID 21mm
Intake with no shim ID 24.6mm
Complete stock Motobecane 3 ball bearing variator assembly.Please be sure to check the unit before installation to be sure all hardware is secure.
Comes as shown.
Decompression valve end clamp. Made for motobecane and Peugeot mopeds, but may fit others. Dimensions:
Overall Length - 10mmOuter Diameter - 6mm
Neck Length - 3.3mmNeck Diameter - 3.9mm
New slider for Domino throttle assemblies on Motobecane and Peugeot mopeds. May fit other models and will not fit old Garelli throttles. Please compare first. Dimensions below.Dimensions:
Base - 17.6mm Long x 8mm Wide x 7.5mm Height on high side, 6mm...
Stud and nut kit to install your Tomos, Puch or similar exhaust.
This kit includes:(2) Nuts 12.5mm Long(2) Studs M6x 32mm Long
Tall M6 x 12.5mm bass exhaust nuts. Can also be used on most intakes.
6mm engine studs fit almost all cylinders and kits...
New old stock original Tomos A3 (1977 - 1991) moped right hand side plastic brake lever.Made by Domino
* Came stock on many other mopeds. Please compare before purchasing.
Knarp - 8mmx15mm
NOS Domino right hand side black plastic lever for Domino style perches. Fits some Tomos A3 Bullet models,some Garelli and Derbi models and others.
Please compare before purchasing.
Overall length - 142mm
Tomos # 222611
Quality KBC half-sealed wheel bearing for various moped wheels. Known to fit the left side of Motobecane rear wheels (6000 bearing for right) and is both sides for Peugeot rear wheels.Please be sure to measure and compare before purchasing.
NOS original Avanti moped Rear Brake Plate with pads and lever assembly. Include 105mm x 25mm pads. These may have shelf wear. Cool Grey.Avanti # 2.545.1300
NOS Throttle cable, made by Benelli / Montgomery Wards, can be used for other mopeds Such as Motobecane, Vespa, Sachs, derbi. Cool grey color.This cable can be used for many things on many mopeds. Please compare and decide if it is the one for you...
NOS black plastic lever for Magura style perches. Please compare before purchasing.
Overall length - 91.5mmLever only Length - 79mm
Made in Germany
Universal Throttle / Choke / Decomp Cable
Original Puch switch base made in Germany by Magura. Includes metal clamp and screws. This is for the Right hand side on many old Puch mopeds. Normally pre 77.
OEM: Magura Part # 349.1.54.018.0
Original Leleu Brake check hole cap. Leleu hubs can be found on many mopeds like Puch, Motobecane, and honda.Recommended Accessories:Leleu Front Hub
Original Puch switch base made in Germany by Magura. Includes metal clamp and screws. This is for the left hand side on many old Puch mopeds. Normally pre 77.
OEM: Magura Part # 3220.127.116.118.0
New Old Stock decal set for Tomos Revival mopeds. A35 and some A55.
Tomos # 232708