Classic style pedals with no reflectors for stealth riders. Fits 99% of mopeds.
Comes with left and right pedals.Dimensions:Tip to tip length - 135mmPedal thickness - 23mmPedal width - 72mm
Quality 18 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
*You WILL need to grind/file the case for this to fit.
Quality 17 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Quality 16 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Quality 15 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Tomos A3 A35 exhaust support bracket. Black
This was an original item on some Tomos A3 and A35 mopeds. You can use this as an adapter or for anything you see fit.
40mm eye to eye
roughly 51mm top to bottom.
Side kickstand for Puch Maxi mopeds. 8.7 inch stand will have it sitting just right.
Black mounting clamp and chrome shaft.
For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning.
Will fit 32-36mm filter mounts.
67mm overall length.
61mm Rear cone widest diameter.
50mm front cone widest...
Inner cable with ONE cable end. Cable is perfect for Peugeot and Motobecane decompression cables. You could pick up a variety of Knarps and use this for other applications as well.
Cable length is 6.6 feet
1.6mm cable thickness
cable end is 5mm...
Metal mesh high flow design for long lasting and easy cleaning.
28mm internal diameter will clamp down 22mm-28mm.
64mm Overall length
51mm Small end diameter
60mm Large end diameter
Fits all OKO carburetors. Metal mesh high flow design for improved performance, long lasting and easy cleaning.
85mm Overall length
50mm Small end diameter
74mm Large end diameter
Puch moped VDO speedometer cable - 60cm
Inner cable is 1.6mm and the threads are 10mm
*A little too short for a maxi/newport. For stock applications, best to get the 70cm or larger*
Puch moped VDO speedometer cable - 70cm
Inner cable is 1.6mm and threads are 10mm
Perfect size for the Maxi, Newport and simialr models. Too short for a Magnum.
Classic 7/8" moped handlebars with cross bar brace. BMX / Motocross style! Similar bars found on the Puch Macho and Tomos Quadro
26" end to end width
4" mounting area width
Classic 7/8" moped handlebars
24" end to end width3.75" mounting area width3" pullback11.5" Rise