12mm x 1mm left flow petcock for many mopeds, same 12mm thread as Tomos Revival, Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and...
Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips.
2mm plastic carburetor shim. Will fit oem Gurtner AR2 705 carburetors on 50V mopeds up to 1977. May be able to use on a custom application.Dimensions:19mm Outer Diameter - 17mm Inner Diameter - 13mm Wide.
Universal long bench seat for any moped you can make it fit. Will easily fit the Motobecane 51V. Perforated for style.
Specifications:Includes / uses standard 26mm bicycle seat post clamp. (M6 threads roughly 60mm apart)Includes mounting bracket/...
New decompression valve for Sachs 504, 505 engines typically found on the Hercules and other mopeds with the Sachs engine. If you notice it's tough to press in you must clean the port and may need to file and / or sand the valve collar to get a proper...
New flywheel nut for Motobecane AV7, AV10, and 50V mopeds.Tightens counterclockwise / to the left / reverse.11mm x 1mm Threading.12.5mm overall - 7mm not including head.
Use this intake for Motobecane AV7 type engines. clean intake that fits the original 17mm Gurtner carburetor shim size.
Dimensions:ID=13mm OD=17mm44-45mm eye to eye
Tech Tip: You may need to file/ground down the top of the intake to clear the cooling...
Chrome metal mesh high flow air filter made for for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers*
Dimensions:With reducing bushing will fit...
Replacement 39mm by 2mm GI style piston ring for Motobecane AV7 / AV10 mopeds. Please compare before purchasing.
*Sold as a single ring.
Replacement Motobecane Flywheel clutch pad set Made for variated models only. Springs included.
Roughly 36mm long x 9mm wide.
Replacement 39mm by 2mm FG style piston ring for Motobecane AV7 / AV10 mopeds. Please compare before purchasing.
*Sold as a single ring.
Puch Maxi S moped tank decal set. One for each side. Could be used on any other Puch as well.Actual decal dimensions are 205mm Long by 25mm Wide.
Universal BA7S 12 Volt 2 Watt incandescent light bulb. Will fit many mopeds. This is oem for Kinetic and some Tomos mopeds with backlit speedometers. Fits Motobecane Huret speedometers.
Kinetic # 15112350Tomos #213993 /...
New stock style pulley for Peugeot 103 mopeds. Includes INA brand Caged bearing.
Replacement Peugeot 103 moped start clutch shoes with springs. For variated models only.
Universal folding foot pegs for passengers or riders. These are inverted and not the usual style of peg. Please check pictures.You'll receive 2 for a set.
Dimensions:Mounting holes: 12.8mmOverall: 134mm (5.27")Width: 45mm (1.78")Peg Thickness: roughly 1"