2mm plastic carburetor shim. Will fit oem Gurtner AR2 705 carburetors on 50V mopeds up to 1977. May be able to use on a custom application.Dimensions:19mm Outer Diameter - 17mm Inner Diameter - 13mm Wide.
Universal long bench seat for any moped you can make it fit. Will easily fit the Motobecane 51V. Perforated for style.
Specifications:Includes / uses standard 26mm bicycle seat post clamp. (M6 threads roughly 60mm apart)Includes mounting bracket/...
New flywheel nut for Motobecane AV7, AV10, and 50V mopeds.Tightens counterclockwise / to the left / reverse.11mm x 1mm Threading.12.5mm overall - 7mm not including head.
Use this intake for Motobecane AV7 type engines. clean intake that fits the original 17mm Gurtner carburetor shim size.
Dimensions:ID=13mm OD=17mm44-45mm eye to eye
Tech Tip: You may need to file/ground down the top of the intake to clear the cooling...
Replacement 39mm by 2mm GI style piston ring for Motobecane AV7 / AV10 mopeds. Please compare before purchasing.
*Sold as a single ring.
Replacement Motobecane Flywheel clutch pad set Made for variated models only. Springs included.
Roughly 36mm long x 9mm wide.
Replacement 39mm by 2mm FG style piston ring for Motobecane AV7 / AV10 mopeds. Please compare before purchasing.
*Sold as a single ring.
New Motobecane spring bracket for the AV10 engines. You need this bracket to retrofit the AV10 engine on your moped.
The Av7 stock engine is not the same style bracket.
Double ended cir clip for use with 10mm stock or performance kits. Made fore mopeds with 10mm wrist pins such as some Tomos, Puch, and Honda. Please be sure to compare before purchasing.
*Sold per piece*
Piston stop for Motobecane mopeds. 14mm x 1.25mm thread and pitch.
Motobecane Plastic Tool Box Cover Nut, M6 x 1.00 Thread. Maybe use it on another M6 bolt somewhere else too?
Decompression valve end clamp. Made for motobecane and Peugeot mopeds, but may fit others. Dimensions:Overall Length - 15mmOuter Diameter - 10mm
Neck Length - 4.7mmNeck Diameter - 5.4mm
New crank cam for your stock points AV7 or AV10 powered moped. The lobe(oblong shape) is what opens and closes your points as the crank spins.about a 12mm to 15mm taper.Uses a 26mm Puller.
New Magneto / Flywheel CDI cover. About 106mm ID.
Recommended Accessories:Rubber Tabs
Motobecane pulley for Motobecane and Mobylette mopeds.
Comes with 11 tooth sprocket and the pedal engagement lever, also include packet of grease.
11 tooth fixed sprocket pulley for Motobecane mopeds. No pedal mode. Flat black.
Comes with high temp variator grease.