Intake for bolt on Mikuni flange style carburetors 18-20mm only. Oil injection or boost bootle inlet on side. Can be capped off if not need. Fits: MB5, NSR50, NS-1 and similar engines.20mm ID.Dimensions:M6 studs with a 47mm spacing(center to...
New 7mm spark plug wire in lengths of 1 meter aka 3.2 feet.
Will not fit Motobecane or Peugeot Mopeds.
A clean and easily mounted universal twist throttle.
Can be used on any 7/8(22mm) handlebars.
Comes with knarp and cable adjuster
Racing wrist pin needle bearing for the cranshaft connecting rod, commonly referred to as the con rod.
This bearing will fit: Honda NSR50, NS-1, NS50F, MT50, MB5, MB50, MTX50, X8R, SFX, Bali.Kymco DJY50, KB, K12, Heroism, Top Boy, Dink.Piaggio...
This style is for using the threaded nut/solid post that comes on most spark plugs, it is 20 inches long and includes a wire connector.
Paper filters trap the finest particles. This one also has a magnet inside to catch finer metallic substances. Best to run a in line filter on all moped, scooters, motorcycles, atv's, quads, etc. Catch debris from entering your carburetor and...
A important upgrade when using a larger carburetor on your Moped, Scooter or Motorcycle. Like the 19mm - 21mm Dellorto PHBG and PHVA. As well as the Mikuni VM20-22 and TM24mm Flat Slide carburetors.
This allows the throttle to open up the larger...
Cable knarp for many uses on cables for mopeds, motorcycles and scooters. Throttles, decompression, etc.
Dimensions: 5.5mm diameter x 6mm long / 6.88mm including screw.
Paper filters trap the finest particles. This one also has a magnet inside to catch finer metalic substances. Best to run a in line filter on all moped, scooters, motorcycles, atv's, quads, etc. Catch debris from entering your carburetor and...
Paper filters trap the finest particles. Best to run a in line filter on all moped, scooters, motorcycles, atv's, quads, etc. Catch debris from entering your carburetor and save yourself from a bad day.
Nice quality clone of the Dellorto PHBG Racing Edition Carburetor. The most noticable feature of the 19mm carb (type PHBG) is its black color. The metal float bowl is equipped with a central screw that allows you to easily change the main jet...
Use this on 12v CDI and Points ignitions to prevent blowing out of light bulbs from voltage surges.
Connect white wire in between (parallel) with ignition power output wire and ground the black wire.
4 petal reed valve for the NSR50, NS-1, It will also work on Puch AJH reed kit and the Honda MB5 if the Athena Spacer is used.
Comes with fiberglass reeds.
Cable knar for many uses on mopeds, motorcycles and scooters.
Dimensions: 5mm diameter x 7mm long
Great universal cable that can be used on Throttles, Chokes, and decompression levers. Depending on your moped, you may need to pick up a knarp to fit on one end.
Dimensions:Housing 69.5"Inner Cable 78" Long
Tech Tip: To shorten; remove the inner...