Puch moped parts for Vintage and Classic mopeds sold by Sears, JC Penny and across the world.
New Kinetic vintage style spark plug boot / cap.Non - resisted type.
Recommended Accessories:Spark PlugsSpark Plug Wire
NOS chrome pedal crank arms. Made for Sachs and Columbia mopeds, but works on almost all mopeds, and clears most performance exhausts. Pretty much everything with 16mm sized cranks. Large offsets and long arms
Dimensions:160mm long (L)170mm long (R)47mm...
17" x 2.00" moped tire.DOT / E4 tire. Nylon 4 plyB load range. 30 PSI28L speed rating. (78 MPH / 120 KPH)Perfect replacement tire for Puch Maxi, Newport. Used on many other mopeds as well.. *Please compare your old size tire...
Replacement piston ring set Tomos A3 mopeds. Fits Puch (except hi-torque late models with L-ring upper), Sachs 504, 505 1A,1B (both) and 1C,1D (lower only) Comes with two rings. 38mm x 2mm FG Always measure and compare before ordering. Tomos # 203300
Stock seat post for Puch Maxi with bicycle type seat post.Please be sure to compare before purchasing. Seat clamp diameter - 21.5mmSeat post diameter - 30mmOverall length - 10inches*Will not fit Swinger or Pinto mopeds.
Universal points ignition coil. Can be used on 6 or 12 Volt systems, points or CDI set ups. fits Vespa, Piaggio, Ciao, Citta, Grande, Bravo, Kinetic, and some Motobecane mopeds. Puch Maxi Points ignitions as well.
Mounting hole distance is 32.5mm...
Replacement Puch oil fill plug for ZA50 2-speed equipped mopeds.
Puch one speed E50 Clutch bushing. Comes with two lubrication holes.Dimensions:14.9mm Inner Diameter17mm Outer Diameter21.4mm Longm**Please be sure to check specs and understand you may need to ream or sand to fit perfectly. Recommended...
Quality aftermarket set of breaker points for various Puch powered mopeds with Bosch ignitions. Tomos A35 with Bosch / Iskra points ignition, as well as Batavus.
Tomos # 223164(no wire)
Sealed beam replacement bulb for the CEV round and bullet headlights, Luxor, as well as others.This has different screw on style prongs.
6 Volt applications.
Actual diameter is 4.5"
Made by GE, Par 36. 6.4 Volts 24 Watts # 4767-2
Biturbo exhaust expansion chamber and baffle. Use for custom projects where performance exhausts are hard to find.
28mm I.D. for the expansion chamber..
Right hand side mounting.
Recommended AccessoriesBrass tall nuts
NSK L17 brass bearing. Used For Tomos A3 crank cases. Also used in Puch ZA50 engines on the magneto side(left.)**Be sure to compare before purchasing.Dimensions:17mm I.D.40mm O.D.10mm WidthTomos # 044370
High quality front cable for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier. Also fits Honda Hobbit PA50 and Peugeot 103 and maybe others.Non Teflon coated.2mm cable means this is a heavy duty cable...
Airsal 47mm 72cc cylinder head for cooling down those big 70cc+ kits. Puch or Tomos.Can be fitted to other mopeds and engines, may require fin trimming. Dimensions:177mm W x 177mm L (6.9" x 6.9")58mm Thick (2.3")44mm Bolt SpacingRecommended...
NOS Flywheel cover for Puch mopeds with an E50 or ZA50 engine such as the Maxi, Magnum, Newport, Korado, Dart, Swinger, Pinto, Freespirit, Kromag, MKII, Cobra
Dimensions:122mm I.D.124.5mm Inner Lip Diameter(refer to picture)140mm mount eyeletsAbout 27mm...
NOS CEV 210 Tail light lens for 19845 Tail light base. Orange side reflectors.Use this on Tomos, Puch, and many other mopeds. Even motorcycles like the Ducati pantah 500 & 600.Puch # 3492553062 - 3188.8.131.526.2Tomos # 213452