Puch moped parts for Vintage and Classic mopeds sold by Sears, JC Penny and across the world.
Classic style pedals with no reflectors for stealth riders. Fits 99% of mopeds.
Comes with left and right pedals.Dimensions:Tip to tip length - 135mmPedal thickness - 23mmPedal width - 72mm
Quality 18 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
*You WILL need to grind/file the case for this to fit.
Quality 17 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Quality 16 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Quality 15 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.
Side kickstand for Puch Maxi mopeds. 8.7 inch stand will have it sitting just right.
Black mounting clamp and chrome shaft.
Puch moped VDO speedometer cable - 60cm
Inner cable is 1.6mm and the threads are 10mm
*A little too short for a maxi/newport. For stock applications, best to get the 70cm or larger*
Puch moped VDO speedometer cable - 70cm
Inner cable is 1.6mm and threads are 10mm
Perfect size for the Maxi, Newport and simialr models. Too short for a Magnum.
Classic 7/8" moped handlebars with cross bar brace. BMX / Motocross style! Similar bars found on the Puch Macho and Tomos Quadro
26" end to end width
4" mounting area width
Classic 7/8" moped handlebars
24" end to end width
3.75" mounting area width
Classic M shape for the cafe racer sporty look. The handlebars are flat, but can be angled in the mount to adjust for drop / pullback. Moped sized, but works well with smaller motorcycles like the MB5, RD50, CB50 and similar.
Low rise bars perfect for custom projects and mean street racers. Low profile to make your moped not look so much like a moped. Even works well on smaller motorcycles like RD's, CB's, MB5's etc.
Diamter - 7/8"
Width - 25...
Speedometer cabke for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier etc. as well as Sachs and Kreidler
For VDO speedometers
850mm Long = 85cm
1.6mm inner cable end
Measure and compare yours for...
Rear flow style petcock with bowl. This helps catches larger debris and prevents it from entering the carburetor.
Perfect for honda hobbit, camino, PA50, PA50ii and garelli VIP, katia, eureka, gulp and flex mopeds + this 12mm size petcock fits...