Replacement 300mm Black on Chrome adjustable shocks for many mopeds and small motorcycles. Measure from eye to eye and compare. Some mopeds you can go a little longer for more travel and clearance. Stiffen or loosen up your rear end with the pre-load adjuster and stop bouncing down the road.
8mm or 10mm eyelets
Great replacement for Puch Magnum and many other larger mopeds.
Posted by steve on 19th Nov 2016
I bought these after measuring my '10 streetmate R shocks at 12.5" (about 312mm). After making sure the swingarm and exhaust would be OK with an extra half inch (twss), I went and bolted them in. They really aren't SHOCKS, but more of a spring upgrade since they don't really absorb much. It definitely helps with the constant bouncing and bottoming out when riding over a crown.
If it matters, I put my old streetmate rears on my LX as an experiment. Makes the bike a very nice few inches taller. If you can make the kickstand work, I'd say these might work. The 300s would be worth trying if you don't want to carry around a small rectangle of plywood for the center stand