Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter MSRP: Was: $15.00 Now: $11.95 Add to Cart Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Pacco | sku: KI-3364 Pacco 13.13 SHA Carburetor- Vespa SI / Kinetic Linkage - Tuning Version Pacco 13.13 SHA carburetor. Clone of the Dellorot, but this is a super tuning version. Has a air/fuel screw and another adjustment never seen before. Cutting edge! Fits Vespa SI, Grillo, Citta and Kinetic mopeds with this style top... MSRP: Now: $55.00 Add to Cart Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3363 OEM Kinetic Spaco / Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic Spaco banjo gasket for 10-13mm SHA carburetors found on Kinetic TFR, Magnum, and all other Piaggio Mopeds like the Ciao, Bravo, Grande, Citta, SI, etc.Lower gasket that goes under your banjo. Kinetic 03194490 Dimensions:12mm... MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3362 OEM Kinetic / Spaco Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Original Kinetic / Spaco banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Kinetic 03194480 Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper Sha Filter Sha Banjo MSRP: Now: $0.99 Add to Cart Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3361 OEM Kinetic Spaco / Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm OEM Kinetic Spaco SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length Kinetic 03018130 MSRP: Now: $3.00 Add to Cart Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Kinetic OEM | sku: KI-3359 OEM Kinetic Spaco / Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors found on Kinetic and Piaggio Mopeds Kinetic 03018170Dellorto # 3364.38 MSRP: Now: $4.99 Add to Cart Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
Polini | sku: VE-3146 Vespa / Kinetic Polini High Flow Air Filter - Tunable. Tunable Polini Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors Little known to most, drill the... MSRP: Now: $16.95 Add to Cart OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected × OK
OMG | sku: UN-3002 OMG 12mm x 1.00mm Semi Extended Lever Fuel Petcock - Right Flow 12mm x 1.00mm Semi extended lever fuel petcock with righthand flow. Fits models such as some Tomos and Vespa Si mopeds. Roughly 35mm extension. Plastic lever style pictured can vary depending on day of manufacture.**Does not fit the Grande. Made... MSRP: Now: $18.00 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected
Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Out of stock SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart Compare Selected
SALE Edge | sku: 363 Vespa High Flow Air Filter Hi flow "Malossi Style" Air Filter / Air Box for optimal power, performance and filtration. For use with Vespa, Piaggio and Kinetic mopeds with SHA style 12-13mm. 12.7,12.10, 12.12, 13.13 Original or Clone Carburetors 50mm I.D. Fits:... MSRP: Was: $15.00 Now: $11.95 Add to Cart
U.S. Dollar
Canadian Dollar
Euro
British Pound
