3/16-1/4" Fuel Filter, Compact Clear Body - Fine Mesh Screen

Compact 3/16-1/4"  fuel filter for tight places. Fine metal mesh filter screen. Great protection from old tanks.  Make sure to pick up some fresh fuel line.Dimensions:54mm overall length20mm OD

12mm x 1.00mm Right Flow Fuel Petcock *Round Knob*

Replacement 12mm Right hand flow petcock. Tomos Revival, Streetmate, Targa, Targa LX, Sprint, Flexer, Arrow, Sachs Hercules, Columbia Commuter,  Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto,...

17mm Bing Air Filter Screen Replacement - 60mm OD

Replacement filter screen for 17mm Bing carburetors found on models such as the Puch Magnum and Monza. Dimensions:60mm OD 10mm Thick

Puch Stock Air Filter Box - Korado / Z-ONE

Replacement air intake filter box for Puch Korado / Z-ONE mopeds with stock Bing carburetors.Fits 20mm Bing with included bushing or fits 28mm with no bushing.

Puch Stock Air Filter Box - Maxi

Replacement air intake filter box for Puch Maxi mopeds with stock Bing carburetors. 

Tomos A3 A35 Air Intake Filter Coupler - Rectangular Opening

Replacement Air intake filter Coupler For Tomos A3 / a35 mopeds. Came on most 1976-1995 models. *Be sure to compare before purchasing as some require the > circular opening coupler. <

Tomos 14.12 SHA Lever Choke Carburetor - Replaces 230260

Replacement Dellorto clone Tomos carburetor found Tomos A35 engines, standard on the sprint, Targa, Targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same carburetor was also found original on most Garelli, Minarelli and can...

Motobecane AV7 20mm OD Intake

Replacement intake manifold for Motobecane AV7 mopeds. *Check before purchasing.  Dimensions:15mm ID20mm OD44mm eye to eye Recommended Accessories:Intake Gasket

Kinetic Original Carburetor Clamp Rubber Seal Ring

Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors

Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors

Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060

Gurtner AR2 10mm Carburetor - AV7 Motobecane

Replacement AR2-10 707-726 style carburetor for Motobecane mopeds with AV7 engines.16mm(15.6) ID shim.  *Not listed as OEM, however it's obvious the original gurtner castings were used to manufacture these. 

Dellorto SHA Carburetor Rebuild Kit - 14-16mm

Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. 

Dellorto SHA Metal Fuel Inlet Banjo - Flat Style

Replacement fuel inlet  banjo for dellorto sha carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds Dellorto # 6475

Fuel Petcock 12mm x 1 Rear Flow - Tomos A3/A35

Replacement petcock with on / off / reserve. Fits 5mm fuel line. 12mm x 1mm female thread coupler nut.  works with honda hobbit, camino, PA50, PA50ii and garelli VIP, katia, eureka, gulp and flex mopeds + this 12mm size petcock fits many other...

Dellorto SHA Carburetor 1mm Intake Shim, 21mm OD

1mm thick shim for SHA carburetor, 14.12, 15.15, 16.16 sizes.   For use with Puch, Motobecane and Peugeot SHA Intakes.Does not fit old model 14.12 Carburetors that came on Tomos A3 and some early moped A35s.  Inspect and...

Amal Pull Choke Lever - 15mm and 17mm

New brass choke lever for 15mm or 17mm Amal carburetors. 

Vespa Piaggio Reed Valve Intake for Biturbo Cylinder Kit

Type a description for this product here...

Amal / Arreche 15mm Pull Choke Carburetor

15mm Amal / Arreche pull choke carburetor. These are high quality Spanish carburetors with more tuning options than a Dellorto SHA and will outperform them.   Shim ID 23mmShim OD 25mm#60 main jet.  Recommended Accessories:Amal Carburetor...

Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs

Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic.  Dellorto # 9249

Tomos A35 Original Air Intake Coupler - Sprint

Original rubber coupler for the Air intake filter box on Tomos A35 Sprint mopeds.  Tomos # 229705

Tomos A35 Performance Intake - 19mm I.D.

Really nice sleek stock looking upgrade intake for reed valve (A35) Tomos engines. *Highly recommended that you sand/chamfor any shape or loose slag. This is a great intake once cleaned up. Dimensions:19mm I.D.24MM O.D. Recommended...

Polyurethane Oil Injection Line / Hose, 3mm *by the foot* - Solid Green

Solid green polyurethane oil injection line for mopeds and many smaller motorcycles, such as Garelli, Puch Magnum, and Tomos. Can also be used for the air injection on your intake or carburetors.  The hose has a 3mm I.D. with a 6mm (15/64'') O...

Original Kinetic Intake Bellow / Boot - TFR USA

Original Kinetic rubber intake boot for TFR USA. Kinetic # 03695260

Honda MB5 Stock Foam Air Filter Element

Replacement stock foam air filter element for Honda MB5 and MT 50. 

Motobecane Gurtner Carburetor Shim - 19OD x 16ID

3mm plastic carburetor shim. Will fit oem Gurtner AR2 707 and AR2-10-991(3/77 - 11/79) carburetors on 50V motobecane mopeds.May be able to use on a custom application. Dimensions:19mm Outer Diameter - 16mm Inner Diameter - 13mm Wide. Replaces...

Motobecane AR2 Gurtner Air Box and Clip - 705 / 707

Gurtner air box with metal filter screen and clip. Fits center mount AR2 705/707 carbs like found on Motobecane 50V mopeds.  Replaces Motobecane # 18355.

Original Kinetic Carburetor Float, 12 - 13mm SHA

Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams   DELLORTO...

Tomos Original A55 Stock Intake - Chrome

Original Tomos A55 engine intake manifold.  *Please compare before purchasing. Dimensions:ID 15mmOD 18mmEye to Eye 32mm Tomos # 233713

Motobecane OMG 10mm Bottom Flow Petcock

Red lever petcock for Motobecane and Peugeot 103 mopeds.10mm threads with bottom flow barbed outlet. 0MG - Made in Italy.

Tomos A3 Intake, Performance Upgrade -18mm Shim

Chrome performance upgrade intake manifold for Tomos A3 mopeds like the Bullet and APN6. This piston port style intake allows you to install a larger Dellorto carburetor using an 18mm shim. Carb hangs to the side. 

Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware

Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 <

Fuel Petcock 12mm x 1 Left Flow - No Writing

12mm x 1mm left flow petcock for many mopeds, same 12mm thread as Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and...

Dellorto PHVA /PHVN Carburetor Rebuild Kit

Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float  pin, needle float bowl o ring, (3) other o rings, and needle clips.

Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit

Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit  76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and...

Motobecane Gurtner Carburetor Shim - 19OD x 17ID

2mm plastic carburetor shim. Will fit oem Gurtner AR2 705 carburetors on 50V mopeds up to 1977. May be able to use on a custom application.Dimensions:19mm Outer Diameter - 17mm Inner Diameter - 13mm Wide. 

OMG 10mm x 1mm Down Flow, Motobecane & Peugeot Moped Petcock

Top quality OMG fuel petcock. Fuel flow is down aka bottom.on / off / reserve 6mm fuel line 10mm x 1mm threading The  same thread works on numerous other mopeds and vintage motorcycles, some of which include certain models of AMF...

Motobecane AV7 Intake Manifold for Gurtner. 17mm O.D.

Use this intake for Motobecane AV7 type engines. clean intake that fits the original 17mm Gurtner carburetor shim size. Dimensions:ID=13mm OD=17mm44-45mm eye to eye Tech Tip: You may need to file/ground down the top of the intake to clear the cooling...

Puch Bing Metal Mesh High Flow Air Filter

Chrome metal mesh high flow air filter made for  for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers* Dimensions:With reducing bushing will fit...

Dellorto 13.13 SHA carburetor- Vespa SI / Kinetic Style Linkage

This is for the Dellorto 13.13 SHA carburetor   Vespa SI, Grillo, Citta and Kinetic mopeds with this style top. Can also be used on Ciao, Bravo, and Grande.  Excellent upgrade for stock and larger bore cylinders.  Comes with a 66 main...

Replacement Motobecane AV85, AV88, AV89, Cady Fuel Petcock - 8mm

Replacement 8mm fuel petcock for the Motobecane AV85, AV88, AV89, Riverside Wards step thru mopeds and similar models. Comes with everything shown. Made in Italy (Not by omg) Recommended Accessories: Inline Fuel Filter