Honda MB5 Stock Foam Air Filter Element

Replacement stock foam air filter element for Honda MB5 and MT 50. 

Motobecane AR2 Gurtner Air Box and Clip - 705 / 707

Gurtner air box with metal filter screen and clip. Fits center mount AR2 705/707 carbs like found on Motobecane 50V mopeds.  Replaces Motobecane # 18355.

Puch Bing Metal Mesh High Flow Air Filter

Chrome metal mesh high flow air filter made for  for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers* Dimensions:With reducing bushing will fit...

Kinetic Air filter box Assembly w/ intake duct - 03019760

Original Kinetic moped air filter box assembly. Includes air box body, intake duct, and air filter retainer. Fits Kinetic carburetors and 13.13mm or smaller Dellorto carbs.Dimensions:50mm air filter opening104mm height with duct95mm width26mm...

NOS Tomos Encarwi Carburetor Air Filter Screen - 200384

NOS original Tomos air filter for the Encarwi carburetor.   52mm x 10mmTomos # 200384 *etched into the side of the filter. 

60mm Foam Moped Air Filter for SHA Carburetors - Black and Chrome

60mm Uni pod style air filter. Works on 60mm openings like those found on SHA carburetors.    Dimensions:80mm overall length74mm outer diameterAccordion style filter - will squish. 

35mm Red Metal Mesh Air Filter, TOMOS A55 PHVA, PHBG

For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning.   Will fit 32-36mm filter mounts. 67mm overall length. 61mm Rear cone widest diameter. 50mm front cone widest...

Original Tomos A35 Foam Air Filter Element Insert - Red

This is an original air filter for Tomos A35 mopeds. Fits in the stock air box. This dry filter is not pre-oiled.    Tomos # 229704

28mm Red and Chrome Metal Mesh Air Filter

 Metal mesh high flow design for long lasting and easy cleaning.  28mm internal diameter will clamp down 22mm-28mm. 24-29mm opening 64mm Overall length 51mm Small end diameter 60mm Large end diameter         Fits:...

48mm Red and Chrome Metal Mesh Air Filter K&N Style

Fits all OKO carburetors. Metal mesh high flow design for improved performance, long lasting and easy cleaning.   48-50mm opening 85mm Overall length 50mm Small end diameter 74mm Large end diameter  

Air Filter For Mikuni Carburetors - 45mm

45mm air Filter For Mikuni Carburetors like the VM 20, 22, and 24 as well as the TM28   Filter itself is 50mm long.  

35mm Black Metal Mesh Air Filter, TOMOS A55 PHVA, PHBG

For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning.   Will fit 32-36mm filter mounts. 67mm overall length. 61mm Rear cone widest diameter. 50mm front cone widest...

Honda Hobbit PA50 Replacement Air Filter

Stock air filter for Honda PA50I, PA50II, Hobbit and Camino. Replace your worn out, broken down filter with a fresh one.

Dellorto SHA 14-16mm Carburetor Air Filter 6117

Air filter  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carburetors.   Dellorto # 6117  

Polini Vespa / Piaggio PHBG Air Filter

Polini made air filter for the Vespa Ciao, Bravo when using a PHBG type carburetor.  Could be also used for special occasions where a compact air box is needed. Polini # 203.0026

Original Dellorto SHA Air Filter, Cover and Clip

This it the stock air filter and cover for the Dellorto SHA style carburetor. It will work on the SHA 14.9, 14.12, 14.14, 15.15, 16.16. This filter is found commonly on Italian mopeds, and Tomos A35 models with the Dellorto carb.  To replace...