Tomos

Tomos A3 Rear Brake Foot Lever - Custom Option

Rear brake foot lever for Tomos mopeds. This is very uncommon but was an option on some old A3 mopeds. Perhaps you want it for your custom Tomos chopper. Dimensions:15mm ID mounting holeabout 8" long arm  Recommended Accessories:Foot Bracket 

Tomos Disc Brake Rotor, 2005 and on Revival / A55 Streetmate

Original brake disc rotor for A55 Tomos Streetmate as well as Revival mopeds made after 2005.Tomos # 243166Dimensions:95mm inner edge to inner edge110mm eye to eye(across hub)55mm eye to eye(left/right)4mm Thick

Clone Dellorto 14.12 SHA Lever Choke Carburetor

Clone Replacement Tomos carburetor found Tomos A35 engines, standard on the sprint, Targa, Targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same carburetor was also found original on most Garelli, Minarelli and can be also...

Original Tomos A55 Cylinder Head - 38mm

Original cylinder head for Tomos A55 engines. Found stock on Tomos A55 Streetmate, Arrow, Revival, Sprint, ST, etc.Be sure to use the extended thread > BES spark plugs <

Tomos A35/A55 Performance Racing Clutch - 1st Gear

High performance and high quality adjustable 3 shoe racing clutch for Tomos A35/A55 powered mopeds. *Soak overnight in preferred ATF.**This is a custom racing clutch, be sure to check and double check upon installing and tuning.**Make sure you use thread...

Tomos A35 Complete Intake Filter Box Assembly - Reproduction

Complete replacement stock intake filter box assembly for Tomos A35 mopeds. Made for SHA carburetors. Includes rubber coupler, intake Tube, and Filter element. reproduction, not oem quality. 

Tomos A35 Stock Air Box Filter - Pre Oiled

Replacement air filter element for Tomos A3/A35 mopeds. Made by Power1. Feel the performance!Must have the elongated/triangular air box for this filter to fit. This was on models such as the Sprint, Targa, TT, LX, etc. Be sure to compare before...

Tomos / Kinetic Rectangular Moped Headlight - Large

Used on many mopeds, but mostly found on Tomos.Takes a 12v 35/35w BA20D bulb, not included.*Please be sure to check the below dimensions before purchasing. Dimensions:148mm(5.8") Mounting width140mm(5.5") Body width98mm(3.85")...

Tomos A55 Exhaust Header, 28mm - Chrome

Tomos A55 chrome header.For use with 2 part exhausts or for custom applications. *Will fit the Puch MV Dimensions:28mm outer diameter.25mm Inner diameter at end.24mm inner diameter at flange.42.5mm center to center mount holes.11 inches over length...

Malossi Tomos A35 Front Brake Pad Set

Front racing brake pads by Malossi. Provides excellent improvement in stopping power over stock pads. Fits A35 2001-2003 Revival mopeds. Homologated and road legal.  *Be sure to compare before purchasing.Dimensions:57mm Overall...

Tomos 22 Tooth Rear Sprocket, A3 A35 A55 - Black

Quality rear sprocket for Tomos A3, A35, A55 mopeds. *Be sure to compare before purchasing. 42.5mm Inner diameter.22 TeethColor may vary, usually gloss black.Made in Germany.  Recommend Accessories:Rear Sprocket Locking Plate

Buzzetti Tomos A35 Center Kickstand, Heavy Duty - Black

Buzzetti center kickstand for Tomos A35 models such as the bullet, Colibri, Targa, sprint, lx Etc. Heavy duty quality Buzzetti construction, includes mounting bolt tunnel  for added stability and strength. Will fit some A3 and A55 models...

Malossi Tomos A35 Front Brake Pad Set - MHR

Front racing brake pads by Malossi. Slower to reach working temperature but provide exceptional braking at elevated speeds. Fits A35 2001-2003 Revival mopeds. *Be sure to compare before purchasing.**Not road rated***These are best used in...

Tomos A3 Intake Manifold - 14mm ID x 18MM OD

Replacement Tomos A3 intake manifold.*Be sure to compare before purchasing. Dimensions:14mm ID x 18MM OD28mm Eye to Eye

*Dented Tomos A35 Moped Tecnigas Next R Exhaust, Chrome

** Small dent right below the hole in the mounting bracket on the front side. *dent is in circled area on photo and about the size of a usa nickle. Tecnigas Next R, one of the best exhausts for the  Tomos mopeds. Excellent construction, and...

Universal Fork Boot/Dust Cover - 29mm/33mm

New black rubber dust covers for Tomos, Puch, Vespa and many other moped forks, May need clamps, zip ties, etc.  *Sold per piece **be sure to measure and compare.Dimensions:175mm long 29mm top opening 33mm bottom opening

Tomos A3 Fork Rubber Sleeve/Shield

Replacement Tomos A3 fork rubber sleeve/seal. May fit other moped forks. Dimensions:28mm Long23mm Small end29mm Large endReplaces Tomos # 207973

Tomos Front Black Fender for A55 LX, ST, Sprint - 242055BLK

Aftermarket replacement front fender for Tomos 2007 and on A55 LX, ST, Sprint. Replaces Tomos part # 242055BLK

Tomos A3 / A35 APN6 Single Seat - Black

Replacement single seat for Tomos A3/A35 APN6 mopeds. Can be made to fit other mopeds as well. Be sure to compare before purchasing. Dimensions:

Original Tomos A35 Brake Drum Lever

Original Tomos A35 brake drum lever. Tomos # 222579

NOS CEV 322 Square Headlight, Body Only - Tomos 227435

NOS CEV square style headlight. This is just like the Saturnus style found on many stock Tomos mopeds, also used on some Kinetic mopeds. Can be used on many custom projects.  CEV Part numbers 40963/40964** These have scuffs and scrapes. Brand new...

Tomos Turn Signal Replacement - Sold Each

Replacement turn signal for Tomos mopeds. Can be used on other mopeds. 

Tomos A3/A35 Under Seat Tool Tray - Black

Replacement under seat tool tray. Fits some A3 and older A35 models. **Does not include oil injection holes. You can drill them if needed.Tomos # 222317

Laser Tomos A3 / A35 Estoril Style Performance Exhaust - Raw

Well designed clone of the popular Estoril exhaust. Retains low end, but midrange and top end are increased much more than the Biturbo. Well designed exhaust.Fits all A3 and A35 based Tomos mopeds besides the Revival.Raw lacquered exhaust with black...

Laser Tomos A3 / A35 Estoril Style Performance Exhaust - Chrome

Well designed clone of the popular Estoril exhaust. Retains low end, but midrange and top end are increased much more than the Biturbo.Fits all A3 and A35 based Tomos mopeds besides the Revival. Chrome exhaust with black baffle.*Mounts up easy to most...

Tomos A3 / A35 Sealed Bearing Front Axle - 11mm Threads

Replacement Front axle for Tomos sealed bearing wheel equipped A3 and A35 mopeds. This will fit "most" A3/A35 mopeds from 1976 - 2007. Please compare before purchasing. Dimensions:146mm long80mm center26mm Threading34mm Threading11 x 1mm end threads12mm...

415H x 94 Link Moped Drive Chain - Tomos

415H moped drive chain for most mopeds. Great quality and dependability. Will work on older A3 Tomos Mopeds.Raw color.415H type x 94 linksIncludes Clip Style Master Link. You may have to remove links depending on your model and gearing...

Tomos Headlight Bracket/Fork Sleeve O Ring

Tomos Headlight Bracket/Fork Sleeve O Ring. This O ring fits under your headlight bracket sleeve to calm vibration and noise. * Two per moped. Works with 93-06 Tomos A35 mopeds. Replaces Tomos # 229399

12mm Single End Piston Circlips Pair - Tomos

Single end circlip for use with 12mm stock or performance kits. 12mm for Tomos mopeds. *Sold in Pairs*

OMG 12mm x 1mm Fuel Petcock, Bottom/Down Flow - Round Knob

Top quality OMG bottom/down flow petcock for many mopeds. Large round knob. Fuel flows down.12mm x 1 threading Made in Italy. Recommended Accessories:Fuel LineInline Fuel Filter  

Tomos A35 Complete 50cc Engine Gasket Set - 11 Hole

Replacement complete 50cc/38mm gasket set for Tomos mopeds with A35 reed engines. Models like the Targa, LX, Sprint, etc.This is the 11 hole version which is for pre 2003 models. Gaskets Included:ClutchCaseBaseHeadReed(x2)

Aluminum Reed Valve Block - Tomos A35 / Peugeot

Replacement reed valve set up for Tomos A35 and Peugeot mopeds. Plastic Block, Aluminum Reeds. 

Original Tomos Turn Signal / Indicator Switch - Black

Original Tomos turn signal switch. Could be used on any moped, but it does say Tomos on the switch body. Fits 7/8" bars.

Tomos A3 / A35 Tecno Estoril Performance Exhaust -V1

The go to for increased performance over the Biturbo, but all around quiet exhaust to keep the neighbors and police off your back.  Retains low end, but midrange and top end are increased much more than the Biturbo. Well designed exhaust.Fits all A3...

Tomos speedometer cable for Arrow / Youngst'r

Tomos Arrow / Youngst'r speedometer cable. M10 threads on one end with M12 threads on the other. 2.5mm inner cable.30.7" Long

Tomos A35 38mm Airsal Piston Kit - 50cc

Airsal piston kit for 38mm Tomos A35 cylinder kits. Comes with everything shown.38mm diameter. 12mm wrist pin. 

Tomos A55 Exhaust - 26mm Stock Style, Black

Replacement stock style exhaust for Tomos A55 powered mopeds like the LX, Sprint, revival etc. Old style looks, slightly improved performance.22mm ID and 26mm OD header. *A55 engines have the Angled exhaust flange. Recommended...

Tomos A35 Exhaust - 26mm Stock Style, Chrome

Replacement stock style exhaust for Tomos A35 powered mopeds like the LX, Sprint, revival etc. Old style looks, slightly improved performance.22mm ID and 26mm OD header. *A35 engines have the Flat exhaust flange. Recommended...

Tomos A35 A55 22T Rear Sprocket

22T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare. Color of sprocket may vary depending on stock. Aluminum or coated finish.Best for top speed with out sacrificing too much low end power. Recommend...

Original Tomos A55 Front Fork Assembly

Tomos OEM Front fork assembly for A55 models with drum brakes and sealed bearing front wheels.Direct replacement for A55 Tomos models such as the Targa, LX, ST, Sprint. *Not including the streetmate or Revival.  *A few Gouges from before paint...