Dellorto 17.5mm PHVA Carburetor Gasket Kit

Original Dellorto gasket set for 17.5mm PHVA carburetors.  Dellorto # 52625.77

Dellorto SHA 12.10 Carburetor for Vespa Piaggio & Kinetic

Genuine Dellorto 12.10 SHA Carburetor for Vespa, Piaggio and Kinetic mopeds. Can be found on many Kinetic mopeds and can be used on Vespa and Batavus mopeds with encarwi as well.   Comes with a...

Dellorto 14.12L SHA Lever Choke Carburetor

Genuine Dellorto 14.12L lever choke carburetor.  Found on Tomos A35 engines, standard on the sprint, Targa, Targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same...

Dellorto SHA Carburetor Float, 10 - 13mm

Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5...

Dellorto SHA 12.12 Carburetor for Vespa Piaggio & Kinetic

Genuine Dellorto 12.12 SHA Carburetor for Vespa, Piaggio and Kinetic mopeds. This version has a 90 degree throttle linkage and a long lever choke found on most Kinetic mopeds and can be used on Vespa...

Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs

Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic.  Dellorto # 9249

Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit

Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit  76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa,...

Dellorto 13.13 SHA carburetor- Vespa SI / Kinetic Style Linkage

This is for the Dellorto 13.13 SHA carburetor   Vespa SI, Grillo, Citta and Kinetic mopeds with this style top. Can also be used on Ciao, Bravo, and Grande.  Excellent upgrade for...

Original Dellorto PHBG Carburetor Gasket Set

Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526

Dellorto PHVA Carburetor Starter / Choke Jet - 40

Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to...

Original Dellorto PHBN Carburetor gasket set

Original Dellorto gasket set for PHBN carburetors. Comes with shown.  Dellorto Part # 52620

Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA

Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591

NOS Tomos A35 / A55 Oil Injection Pump - Dellorto

Hello, Dellorto brand oil injection pump for Tomos mopeds. Will fit A35 and A55 engines. Please be sure to compare yours before purchasing.    *Includes only whats in the picture...

Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds

Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327   Recommended Accessories : Shim

Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2

1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm   Tomos...

Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos

Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture.    Tomos...

Dellorto 21mm PHBG AD Carburetor with Cable Choke

Clamp mount 21mm PHBG AD carburetor.  32mm threaded Air Filter side 24mm (with shim) intake side Cable choke   Typical jetting 40 Slide W17 Needle 262AU Atomiser 92 Main...

Dellorto SHA Float for Tomos A35 Mopeds

Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds  Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type.  Dellorto...

Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors

New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors.  Clones may vary. 8mm threading   Dellorto # 8366

Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic

Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds.  OD - 18mmID - 16mm Dellorto # 7417

Dellorto 21mm PHBG DS Carburetor with Cable Choke

Spigot mount 21mm PHBG DS carburetor.  32mm Air filter mount  25mm Spigot mount. Cable choke   Typical jetting 40 Slide W17 Needle 262AU Atomiser 92 Main...

Dellorto PHBG Carburetor Cable Choke Assembly

Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke.   Fits all Dellorto PHBG carburetors.  Clones may vary. Dellorto # 53002-78

Dellorto SHA 13.13 carburetor for Vespa Piaggio & Kinetic Mopeds * Long Lever*

This is for the Dellorto 13.13 SHA carburetor for Vespa, Piaggio and Kinetic mopeds..  Excellent upgrade for stock and larger cc cylinders.  Comes with a 66 main jet.  Too rich...

Dellorto SHA 13.13 carburetor for Vespa Piaggio and Kinetic Mopeds

This is for the Dellorto 13.13 SHA carburetor for Vespa, Piaggio and Kinetic mopeds..  Excellent upgrade for stock and larger cc cylinders.  Comes with a 66 main jet.  Too rich...

Dellorto SHA Carburetor Float Chamber

Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in...

Dellorto SHA 12.12 Carburetor for Vespa Piaggio & Kinetic Mopeds

The Dellorto 12mm SHA carburetor is the original replacement  for Vespa, Piaggio and Kinetic mopeds like the Ciao, Bravo, Boxer, Grande, Citta, TFR etc.   Take note of the cable...

Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235

Air filter cover clip  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6235  

Dellorto SHA 14-16mm Carburetor Air Filter 6117

Air filter  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carburetors.   Dellorto # 6117  

Dellorto SHA 14-16mm Carburetor Air Filter Cover 6183

Air filter cover for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6183  

Dellorto SHA 14-16mm Carburetor Rebuild Kit, Tomos

Complete gasket rebuild kit for SHA carburetors  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 52533   Suitable...

Original Dellorto SHA Air Filter, Cover and Clip

This it the stock air filter and cover for the Dellorto SHA style carburetor. It will work on the SHA 14.9, 14.12, 14.14, 15.15, 16.16. This filter is found commonly on Italian mopeds, and Tomos...

Dellorto 16.16 SHA Carburetor, Cable Choke

Great upgrade for Motobecane and Peugeot mopeds. Pairs well with 70cc kits as well. Internal mounting diameter is 19mm.  Dellorto # 2150 Recommended Accessories: 5mm Main Jets Throttle /...

OEM Tomos Dellorto 14.12P SHA Lever Choke Carburetor 230260

Original Tomos carburetor found on the Tomos A35 engine standard on the sprint, targa, targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same carburetor was also found...

Dellorto PHVA 17.5mm ED Carburetor 1407

Excellent carburetor upgrade for Tomos A55 mopeds. Move from the stock 14mm to a increased 17.5mm.  Works well with 50cc or 70cc setups.  Fits exactly the same as the stock carburetor so...

Dellorto SHA Carburetor 1.5mm Intake Shim for Tomos

1.5mm thick shim for SHA carburetors.  14.12, 15.15, 16.16 . . . Does not fit old model 14.12 Carburetors that came on Tomos A3 and some early moped A35s.  Inspect and measure  yours...

Dellorto 19mm PHBG BS Carburetor with Pull Choke

This type of  PHBG carbs that mount with rubber intake manifold to the intake. This style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than...

Dellorto 21mm PHBG BS Carburetor with Pull Choke

This type of  PHBG carbs that mount with rubber intake manifold to the intake. This style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than...

Dellorto 15.15 SHA Carburetor with Lever Choke

The Dellorto SHA 15.15 is a great replacement to many stock carburetors and is an upgrade from the traditional SHA 14.12 carb found on most stock mopeds. This will work with many different brands,...

Dellorto 15.15 SHA Carburetor with Cable Choke for Motobecane and others.

The Dellorto SHA 15.15 is a great replacement to many stock carburetors and is an upgrade from the traditional SHA 14.12 carb found on most stock mopeds. This will bolt up to many different brands,...

Dellorto 21mm PHBG DS Carburetor Racing Edition

  The most noticable feature of the 21mm carb (type PHBG) is its black color. The metal float bowl is equipped with a central screw that allows you to easily change the main jet, the way...