Domino Hand Control Grip Set, 8 Sided - Black

Original Domino 8 sided grip set. Use for mopeds and motorcycles with 22mm(7/8") handlebars. Came stock on Pre 1988 Vespa Piaggio Ciao and Si models as well as many other mopeds.  Grips are 114mm long. 

Vans Cult Waffle Handlebar Grip Set, 7/8" - Grey

Excellent looking iridescent purple Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only.Classic Van's waffle sole pattern now in grip form.One side for throttle, one side for brake.Made in USA by ODI. Overall Length - 4...

Vans Cult Waffle Handlebar Grip Set, 7/8" - Iridescent Purple

Excellent looking iridescent purple Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only. Classic Van's waffle sole pattern now in grip form.One side for throttle, one side for brake.Made in USA by ODI. Overall Length - 4...

Cuppini Chrome Vespa Piaggio Ciao Quill Stem Handlebars

Original Vespa Piaggio quill stem chrome handlebars from AMS Cuppini. Fits Vespa Ciao and many other models. The quality and ultra radness of these bars is unbelievable. Dimensions:(about)7/8" Bars21mm Stem26" End to endMade in Italy

Cuppini Chrome Cruiser Handlebars *Large*

Super classic chrome handlebars from AMS Cuppini. Logo is riveted in place.The quality and ultra radness of these bars is unbelievable. Large sweeping handlebars for cruisers and classics.  Dimensions:(about)7/8" Bars8.5" Rise8 Pullback31" End to...

NOS Piaggio Vespa Dashboard / Speedo / Instrument Panel Cover Cap - Grey

NOS Piaggio Vespa headlight and dash cap. Piaggio symbol on top, grey color48mm Diameter. Used on 50mm speedometer / tachometer openings.Will fit some Vespa Ciao and Si models.*Must compare before purchasing. Piaggio # 291680

Vespa Piaggio Domino Control Lever Kit - Red Plastic

Vespa Piaggio Red lever set for Domino style controls. Fits most stock controls on Vespa Piaggio mopeds. Works on Garelli mopeds as well.*Be sure to check yours before purchasing.Includes:2x Brake levers2x Brake return springs-CIF Italy

Vespa Piaggio Domino Control Lever Kit - Black Plastic

Vespa Piaggio black lever set for Domino style controls. Fits most stock controls on Vespa Piaggio mopeds. Works on Garelli mopeds as well.*Be sure to check yours before purchasing.Includes:2x Brake levers2x Brake return springs1x Choke/Decomp/starter...

Vespa Piaggio Domino Control Lever Kit - White Plastic

Vespa Piaggio lever set for Domino style controls. Fits most stock controls on Vespa Piaggio mopeds. Works on Garelli mopeds as well.*Be sure to check yours before purchasing.Includes:2x Brake levers2x Brake return springs1x Choke/Decomp/starter...

NOS Huret 40MPH Motobecane Speedometer with Backlight

NOS Huret 40MPH speedometer with backlight for Motobecane mopeds. Accepts 2.5mm speedometer cables.

Motobecane Handlebar Grip Set W/ Logo - Black

Type a description for this product here...

Motobecane Handlebar Grip Set W/ Logo - Grey

Replacement grip set for motobecane mopeds.For 7/8" or 22mm handlebars.4 inches long *Sold by the set ( left and right side)

Tomos A3 Twist Throttle Tube Replacement - new version

Replacement throttle tube for Tomos A3 mopeds. these are the late model wrap around Magura clone tubes.  Please compare before purchasing. May require some filing or sanding.

Chrome Classic Handlebars - Honda, Vespa, Etc

Universal classic chrome 7/8" handlebars. Great replacement for Vespa Citta and Honda Hobbit/Camino mopeds. 24" end to end width3.75" mounting area width3" pullback11.5" Rise

Kinetic Original Handlebar Grip, left Hand Side

Original left hand side handlebar grip for kinetic mopeds, will fit any 22mm(7/8) handlebar. Nice and gummy. Kinetic # 15082320Recommended Accessories:Throttle Tube w/ Grip

Motobecane Hand Control Set - Dual Lever Original Style

Replacement motobecane hand control set. Left brake and decomp lever with right throttle and choke lever. Includes threaded brake hole on left side only.  *Not high quality looks, but function nicely.  Recommended Accessories:Throttle Cable /...

Universal Waffle Style Handlebar Grips , Yellow - 7/8"

Waffle style handlebar grips for 7/8" or 22mm handlebars4.5 inches long. Original style found on Puch Magnum and Tomos mopeds. *Sold per pair*Not lusito brand Recommended Accessories:Handlebars

Vespa Piaggio Ciao PX / SI Right Right Lever

Replacement Domino style plastic lever for Vespa Piaggio mopeds such as Ciao PX and SI. Right hand side. Dimension:138mm overall length12mm thickness at mount Piaggio # 177340

Brake lever Left, Black - Tomos A3 A35 Puch Maxi

 Lusito brake lever for Tomos A3, A35 and Puch Maxi mopeds.   *Compare before purchasing. Dimensions:142mm Overall Length14.7mm Outer thickness8.2 Inner thickness8 x 12mm Cable stop required6.3mm Bolt...

Universal Clutch / Starter Cable - Hercules Prima 4/5

 New clutch / starter cable for mopeds with sachs engines like, Hercules, Prima 4 / 5,  Balboa, Columbia, etc.  *Be sure to compare before purchasing.  Dimensions:42" Inner cable37.5" Cable housing6mm Cable adjuster threading

Honda MB5 Throttle Cable - Dual Ended

Replacement Honda MB5 throttle cable. Will fit MT and NSR models. *Must compare before purchasing. 

Puch Moped Throttle Cable - Angled Guide Version

Puch throttle cable.  Works on most Maxi, Pinto, Newport and Freespirit mopeds. Check your old cable for comparison when buying. cable end: M5 x 0.8mm threading housing: 39.5" longinner cable: 45" long

Cuppini Chrome Cruiser Handlebars *Small*

Super classic chrome handlebars from AMS Cuppini. The quality and ultra radness of these bars is unbelievable.   Perfect BMX Cruiser / Retro Trail Scrambler feel  for mopeds and smaller motorcycles. Dimensions:7/8" Bars4.2" Rise4.2...

Original Kinetic Moped Key Blank

Clean new key blanks for Kinetic mopeds. Stamped "Kinetic"   *You receive one.

Original Kinetic Left Hand Lever Assembly - Magnum / Universal

Original Kinetic Left Hand Lever Assembly for Kinetic Magnum but can be used on any moped for a custom project. Includes perch, lever, 2 wire brake switch with harness, and 8mm mirror mount hole. Kinetic# EX152040 Recommended Accessories:Right...

Original Kinetic Right Hand Lever Assembly - Magnum / Universal

Original Kinetic Right Hand Lever Assembly for Kinetic Magnum but can be used on any moped for a custom project. Includes perch, lever, 2 wire brake switch with harness, and 8mm mirror mount hole. Kinetic# EX152050 Recommended Accessories:Left...

NOS Motobecane Handlebar Clamp / Mount Kit - Chrome

Original Motobecane handlebar clamp / mounting kit. ChromeIncludes what you see, (2 u-bolts, 2 risers, 4 washers, 4 nuts.)This will fit Kinetic mopeds though it will raise the handlebars by roughly 12mm. Motobecane # 20971Made in France.

Original Kinetic Handlebar Riser / Spacer - Chrome

Original handlebar riser for all Kinetic mopeds. Chrome plated.*These are 12mm shorter than the Motobecane style.*Hardware product page coming soon, if you need the hardware contact us. Dimensions:25mm L15mm W17.5mm Valley height22mm Overall...

Magura Style Metal Brake Lever, Rear (Left ) Tomos A3 / Puch

New black metal replacement rear (left) brake lever for your Tomos A3, Puch Maxi, and some other Magura style perches. Please compare before purchasing. Overall length - 132mm Recommended Accessories: Cable stop / Nipple

Original Kinetic Throttle Tube w/ Grip

Original Kinetic Throttle Tube with grip. Will fit many mopeds needing a 7/8 inch throttle. *Be sure to compare before purchasing. Kinetic # 15082310 Recommended Accessories:Matching Left grip

Vans Cult Waffle Handlebar Grip Set, 7/8" - Brown

Really nice Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only. Classic Van's waffle sole pattern now in grip form. One side for throttle, one side for brake. Brown WaffleMade in USA by ODI. Overall Length - 4...

Vans Cult Waffle Handlebar Grip Set, 7/8" - Gum Rubber

Really nice Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only. Classic Van's waffle sole pattern now in grip form. One side for throttle, one side for brake. Gum Rubber WaffleMade in USA by ODI. Overall Length - 4.9"(125mm)

Vans Cult Waffle Handlebar Grip Set, 7/8" - Orange

Really nice Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only. Classic Van's waffle sole pattern now in grip form. One side for throttle, one side for brake. Orange WaffleMade in USA by ODI. Overall Length - 4.9"(125mm)

Vans Cult Waffle Handlebar Grip Set, 7/8" - Black

Really nice Vans Cult ODI grips for your mopeds or mini motorcycles. 7/8" handlebars only. Classic Van's waffle sole pattern now in grip form. One side for throttle, one side for brake. Black WaffleMade in USA by ODI.Overall Length - 4.9"(125mm)

Original Kinetic TFR Moped Speedometer Cable - 04084040

Original Kinetic TFR Moped Speedometer Cable. Dimensions:28 1/4 inch inner cable27 3/4 inch housing2.5mm Inner cable ends10mm threadsKinetic # 04084040

Chrome Classic Moped Handlebars with Cross Bar. *Small*

Classic 7/8" chrome moped handlebars with cross bar.Standard fitment bars for Motobecane and Peugeot 103, sp, and spx mopeds.  Smaller than the Puch style BMX bars. 24.5" end to end width3.8" mounting area width4" pullback6.8" rise

Cable Adjuster M6 X 20mm Threading - No Slot *Sold Each*

Universal M6 cable adjuster for many moped applications, NO slot. Please check and compare yours before purchasing.For use up to 6mm thick cable housings. Dimensions:6mm threading20mm long Threads28mm Long overall *Sold each

Slotted Cable Adjuster M7 x 25mm *Each*

Universal M7 slotted cable adjuster for many moped applications. Please check and compare yours before purchasing.For use up to 7mm thick cable housings. Dimensions:7mm threading25mm long Threads38mm Long overall *Sold each

Extra Mini Cable Knarp - 5mm x 6mm

Cable knarp for many uses on cables for mopeds, motorcycles and scooters. Throttles, decompression, etc. Dimensions: 5mm diameter x 6mm long

Decompression Valve Cable End Clamp / Knarp - 10 X 15

Decompression valve end clamp. Made for motobecane and Peugeot mopeds, but may fit others. Dimensions:Overall Length - 15mmOuter Diameter - 10mm Neck Length - 4.7mmNeck Diameter - 5.4mm