Connectors/Terminals

Replacement Igntion for Honda MB5, MB50, MT50, MTX w/ Wire Harness

Replacement Non oem ignition switch for Honda MB5 and similar models. 6 Blade female clip. 

Tomos/Universal Moped Wire Harness - 12 Volt

Universal wiring harness with lots of connections. Said to fit A3 Tomos mopeds. Please be sure to compare the pictures before ordering. 

Kinetic TFR USA/Magnum engine Stop Switch/Throttle Perch Assembly

Original Kinetic TFR/Magnum engine stop switch / throttle perch assembly. This is the throttle perch, the throttle cable and tube are installed into this. Includes wiring.Kinetic # 03103760Recommended Accessories:Left Hand Side Perch Throttle...

NOS CEV Diamond Horn Button

NOS CEV horn button assembly. Chrome body/ black button. 35-36mm mounting hole width.

Honda MB5 Rear Brake Light Switch w/ Spring

Aftermarket replacement taillight switch for Honda MB/MT 50. Includes the switch, spring, and 26mm long leads with 3.5mm male and female ends.

Vespa Piaggio Flasher Relay - 12V 10/21 Watt

Vespa Piaggio Kinetic flasher relay. Made for the Vespa PX 125 / 150 and Vespa APE 50. Works on Kinetic mopeds as well. Could be used for custom applications. 12Volt 10/21 WattDimensions:55mm Long30mm Wide30mm High Made in Spain by Guilera.

Motobecane Ignition Coil Spark Plug Wire Mount - 40, 50, 88

Replacement spark plug wire mount for the original Motobecane ignition coils. Fits a 6mm max outer diameter wire. M12 x 1 threading. 

NOS Puch Niox Headlight Socket / Bulb Holder

  Puch NOS Niox bulb holder / socket for Magnum mopeds. Puch # 349.3.53.819.2 Recommended Accessories:Ba15s Bulbs  

BA20D Headlight Bulb Holder / Socket, 3 Prong Guia Style

BA20D headlight bulb socket/holder. Will fit many of our round and bullet style headlights. Almost every Guia headlight uses this style socket. Recommended Accessories:BA20D Bulbs  

Honda MB5 Wiring Harness

Replacement wiring harness for the Honda MB5. Roughly 63" Long.

Tomos Wiring harness - Universal, small

Replacement wiring harness for you moped project. 

Universal LED Turn Signal Light Resistor

Vital component when switching to an led system. 

Original Kinetic Flasher Unit - TFR USA

Original Kinetic moped flasher unit for the TFR USA model. 12V 25 WATT. 3 prong female connector Kinetic # 03197380

Original Kinetic Speedometer Light Bulb Socket Wiring Harness

OEM Kinetic moped speedometer light socket wiring harness. About 8" Long overall. with a 2 prong female clip.Uses BA7S base bulbs and works with this kinetic speedo.

Tomos Original A35 Wiring Harness for Revival

Tomos 2001- 2007 A35 Revival / Streetmate taillight wiring harness.   Tomos # 232785

Tomos Original Speedometer Bulb Socket

This is an original Tomos speedometer bulb socket/holder.  Fits most A55 and A35 mopeds. Compare yours first to be sure.    Tomos # 227497

Motobecane Engine Block Grounding Strap

Grounding strap for Motobecane engines. Really could be used to ground most anything.   

NOS Foxi / KTM Moped CEV Wiring Harness and Switch

New Old Stock CEV wiring harness for Foxi mopeds and the KTM Hobby.   These specifically are from the European sold KTM Hobby, but can be mated to work with the U.S. sold Foxi Deluxe,  Baron, and classy Salzburg or another custom built ride...

6 Block Electric Wire Connector Terminal - Black

Standard electrical wire terminal. One wire in each end and the current is transfered accross.  These are a nice improvement over the old stock terminals. 6 - block black terminal. Going custom or staying original, these get the job done.  

6 Block Electric Wire Connector Terminal - White

Standard electrical wire terminal. One wire in each end and the current is transfered accross.  These are a nice improvement over the old stock terminals. 6 - block white terminal. Going custom or staying original, these get the job done.