Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber MSRP: Now: $5.99 Add to Cart Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 671 Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235 MSRP: Now: $2.00 Add to Cart Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2889 Dellorto SHA Carburetor Fuel Inlet Banjo Gasket - Upper Banjo gasket for SHA carburetors. This is the upper gasket that goes on top of your banjo.*Compare size before ordering. Dimensions:5mm ID8mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Lower MSRP: Now: $0.99 Add to Cart Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2842 Dellorto 10 - 13 SHA Carburetor Fuel Inlet Banjo Gasket - Lower Banjo gasket for 10-13mm SHA carburetors.Lower gasket that goes under your banjo. Dimensions:12mm ID16mm OD1mm ThicknessRecommended Accessories:Sha Banjo Gasket - Upper MSRP: Now: $0.99 Add to Cart Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: UN-2452 5mm Jet Assortment 100-122 for Dellorto SHA & PHBG Carburetors Replacement jet Assortment of 10 for Dellorto PHBG and SHA carburetors.Sizes Included:100-102-105-108-110-112-115-118-120-122 MSRP: Now: $22.00 Add to Cart Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2444 Dellorto 17.5mm PHVA Carburetor Gasket Kit Original Dellorto gasket set for 17.5mm PHVA carburetors. Dellorto # 52625.77 MSRP: Now: $14.00 Add to Cart CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2348 Dellorto SHA Throttle Slide Return Spring - 10,12,13 Dellorto SHA throttle slide return spring for 10mm, 12mm, 13mm carburetors. Found stock on Vespa Piaggio Ciao, Bravo, Si, and many other mopeds.Dellorto# 7413.61 MSRP: Now: $2.99 Add to Cart CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: VE-2252 Vespa Piaggio SI Choke Lever for Dellorto SHA Carburetor Choke lever for Vespa Piaggio Kinetic mopeds.Will fit others with similar Dellorto 10-13mm SHA Carburetors. examples below.12.12 SHA w/ 90 degree top13.13 SHA w/ 90 degree top13.13 SHA w/ cable guide top -CIF Italy MSRP: Now: $4.99 Add to Cart CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2248 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Angled Angled style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 8106.38 -CIF Italy MSRP: Now: $6.49 Add to Cart CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2241 Original Dellorto 12 - 13 SHA Metal Fuel Inlet Banjo - Straight Straight style Fuel inlet banjo for 12mm to 13mm SHA carburetors. Dellorto # 3364.38 -CIF Italy MSRP: Now: $5.99 Add to Cart Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2238 Original Dellorto 14 - 16 SHA Metal Fuel Inlet Banjo - Straight Original fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Dellorto # 6475Made in Italy MSRP: Now: $5.99 Add to Cart CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2237 Original Dellorto PHVA Lever Choke Assembly Manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replaces Tomos # 243151 Made by CIF in Italy MSRP: Now: $15.99 Add to Cart CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2233 Dellorto SHA Carburetor Fuel Filter Screen, Fits 12mm - 13mm Dellorto SHA carburetor filter screen, fits 12-13mm SHA style carburetors found stock on most Vespa Piaggio /and Kinetic mopeds. Dimensions:10.6 OD8.7 ID8.2 Length MSRP: Now: $3.00 Out of stock CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2228 Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length MSRP: Now: $0.99 Add to Cart CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2226 Dellorto Throttle / Choke Cable Guide Kit - 90 degree bend Dellorto Throttle and/or choke cable guide kit for PHBG, PHVA, SHA and others. 90 degree bend (30mm L overall)Straight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
CIF | sku: DO-2224 Dellorto Throttle / Choke Cable Guide Kit - 70 / 60 degree bends Dellorto Throttle and/or choke cable guide kit. Comes with 70 and 60 degree bends. 70 degree bend60 degree bendStraight adjusterrubber boot M6 x 0.75 threading MSRP: Now: $8.99 Out of stock Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-2222 Dellorto SHA Carburetor Float, 10 - 13mm Genuine Dellorto carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Part # 7420.1 Weighs 2.5 grams Dellorto # 7420.80.01 MSRP: Now: $7.00 Add to Cart Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-2123 Kinetic Original Carburetor Clamp Rubber Seal Ring Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic # 13223240 Recommended Accessories:SHA carburetors MSRP: Now: $3.99 Out of stock Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-2118 Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060 MSRP: Now: $3.00 Add to Cart Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2084 Dellorto SHA Carburetor Rebuild Kit - 14-16mm Replacement gasket set with hardware to get your SHA 14-16mm carburetor clean and operating again. MSRP: Now: $17.99 Add to Cart Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: DO-2077 Dellorto SHA Metal Fuel Inlet Banjo - Flat Style Replacement fuel inlet banjo for dellorto SHA carburetors, sizes 14-16mm typically found on Tomos A35 and Garelli Mopeds. Replaces Dellorto # 6475 MSRP: Now: $4.99 Add to Cart Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: DO-1995 Dellorto SHA Fuel Inlet Banjo, Plastic - 14-16mm Carbs Dellorto angled fuel inlet banjo. Fits SHA 14-16mm Carburetors commonly found on Tomos a35 and Garelli mopedsBlack plastic. Dellorto # 9249 MSRP: Now: $5.99 Add to Cart Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Kinetic OEM | sku: KI-1866 Original Kinetic Carburetor Float, 12 - 13mm SHA Original Kinetic moped carb float. Will fit all 12mm to 13mm SHA carburetors. Fits all Kinetic with the spaco 12 -13mm sha carbs as well as Vespa Piaggio mopeds. Spaco Licensed by DellortoPart # 7420 / 2 Weighs 2.5 grams DELLORTO... MSRP: Now: $6.99 Add to Cart Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Spaco | sku: 1799 Dellorto / Spaco PHBG Carburetor Rebuild Kit - Gaskets, Float, Hardware Dellorto / Spaco PHBG carburetor rebuild kit. Comes with what you see, gaskets, float, and bowl screws.Includes > Dellorto # 52526.77 < MSRP: Now: $20.00 Out of stock Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1791 Dellorto PHVA /PHVN Carburetor Rebuild Kit Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips. MSRP: Now: $15.00 Out of stock Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1784 Dellorto SHA 14-16mm Carburetor Gasket Rebuild Kit Dellorto 14-16mm carburetor gasket rebuild kit. Used on many Tomos mopeds from 1976 until 2004. Will fit 76-91 A3 Bullet and 1992-2004 A35 mopeds like the Bullet, Sprint, Colibri, Targa, Revival tx50, mc50, and mc36 as well as 03-06 A35 Sprint and... MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1678 Original Dellorto PHBG Carburetor Gasket Set Original Dellorto gasket set for all PHBG carburetors. Comes with everything shown. Dellorto Part # 52526 MSRP: Now: $6.99 Add to Cart Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1623 Dellorto PHVA Carburetor Starter / Choke Jet - 40 Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size... MSRP: Now: $4.00 Out of stock Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1569 Original Dellorto PHBN Carburetor gasket set Original Dellorto gasket set for PHBN carburetors. Comes with shown. Dellorto Part # 52620 MSRP: Now: $8.99 Add to Cart Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1520 Dellorto Carburetor Choke Lever Return Spring - 14, 15, 16 SHA Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591 MSRP: Now: $1.95 Add to Cart Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1406 Dellorto SHA Carburetor Rubber Ring for Intake - A3 A35 Tomos Mopeds Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . . Tomos # 21327 Recommended Accessories : Shim MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1404 Dellorto SHA Carburetor 1.5mm, 21mmOD Intake Shim for Tomos Mopeds - Type 2 1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . . Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm Tomos # 227326 MSRP: Now: $3.99 Add to Cart sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
sku: 1388 Dellorto PHBG Carburetor Air Filter Adapter - 60mm Screw On Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack. 60mm filter clamp diameter. Screws on to any PHBG carburetor. MSRP: Now: $4.50 Add to Cart Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1387 Dellorto PHVA Cable Choke Assembly Kit - OEM Tomos Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke. *Includes only what you see in the picture. Tomos # 243152 MSRP: Now: $16.00 Add to Cart Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1284 Dellorto PHVA Lever Choke Assembly Replacement manual choke lever mechanism for Dellorto PHVA carburetors. *Includes mounting bracket and hardware* Replacement for Tomos # 243151 MSRP: Now: $12.99 Add to Cart Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Generic | sku: 1260 Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183 Air filter cover for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar. Also works with clone carbuetors. Dellorto # 6183 *This is NOT a genuine Dellorto product. Genuine Dellorto... MSRP: Now: $3.99 Out of stock Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1237 Dellorto SHA Float for Tomos A35 Mopeds Dellorto SHA float. originally came on 14/12 SHA carburetors found on Tomos A35 mopeds Will fit all 14.12, 15.15, and 16.16 carburetors except Ciao type. Dellorto # D6122 / D0612202-80 *No pin included. MSRP: Now: $7.99 Add to Cart Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 989 Dellorto SHBC Pull Choke Lever - fits all SHB Carburetors New pull choke lever for SHBC carburetors. Fits all Dellorto SHB carburetors. Clones may vary. 8mm threading Dellorto # 8366 MSRP: Now: $9.50 Out of stock Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1203 Dellorto SHA Carburetor 2mm Intake Shim, 18mm OD - Vespa Ciao Kinetic Carburetor shim that fits small SHA carburetors like the 12.7, 12.10, 12.12, 13.13 typically found on Vespa and Kinetic mopeds. OD - 18mmID - 16mm Dellorto # 7417 MSRP: Now: $3.99 Add to Cart Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 1181 Dellorto PHBG Carburetor Cable Choke Assembly Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke. Fits all Dellorto PHBG carburetors. Clones may vary. Dellorto # 53002-78 MSRP: Now: $12.99 Add to Cart Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
Dellorto | sku: 822 Dellorto SHA Carburetor Float Chamber Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595 MSRP: Now: $5.99 Add to Cart
U.S. Dollar
Canadian Dollar
Euro
British Pound
