Kinetic OEM

18 Tooth Freewheel Sprocket for Mopeds and Single Speed Bicycles

18 tooth freewheel for many mopeds including Vespa Piaggio and Kinetic.French thread 34.7mm x 1mm Kinetic Replacement # 03039030 Please compare and measure yours before purchasing. 

6202 Bearing 35x15x11 - Kinetic Original

Original Kinetic Crankshaft bearing for all kinetic mopeds. This will fit Vespa Piaggio and Sachs cranks as well. 6202 bearing 35OD x 15ID X 11 W (mm) Made in India

Cosmo Golden Boy Tire 16 x 2.50" - Kinetic Original

Original 16 x 2.50" Kinetic moped tire. Made by Shinko for Cosmo Motors. *New old stock, squished and probably dirty. Discount tire**Rim not included, only to show shape. Kinetic # 15123170

Kinetic / Vespa Moped Crank Shaft Oil Seal - 15 x 24 x 5

Original Kinetic seal 24mm outer diameter, 15mm inner diameter with a 5mm thickness. Crankshaft oil seal for all kinetic mopeds. Will also fit Vespa crankshafts, minarelli V1 output shaft...

Kinetic Air filter box Assembly w/ intake duct - 03019760

Original Kinetic moped air filter box assembly. Includes air box body, intake duct, and air filter retainer. Fits Kinetic carburetors and 13.13mm or smaller Dellorto carbs.Dimensions:50mm air...

Kinetic Front Forks, Lower triple and tubes, TFR USA - Black

Front fork base assembly for Kinetic TFR & TFR USA mopeds.  Black metallic paint. No hardware, no springs. Kinetic # 03788140 & 03088840 Recommended Accessories: Chrome...

Kinetic Milano Red Reflector set, Universal - 66mm x 40mm

Original Kinetic Milano red reflector set. Made for the rear skirts on Milano scooters, but can be used on many applications. Reflectors have a threaded M4 stud with washer and nut on the rear for...

Kinetic Milano Stock 50cc Cylinder Head

Original 50cc Cylinder head for the Kinetic Milano scooter. 

Kinetic Moped Decompression Cable - Double ended

Original Kinetic moped decomp cable. Can be used on many mopeds.  This can be used with several model mopeds.Kinetic # 03081440Please compare before purchasing. Some models use...

Kinetic Moped Fuel Petcock - Down Flow

New original Petcock for kinetic mopeds. Will fit other mopeds with 12mm threading.12mm threading with 6mm down / bottom barbed fuel flowPlease compare before purchasing Kinetic # 03085730 ,...

Kinetic Moped Locking Gas Cap - Chrome

Really nice locking gas cap for all Kinetic mopeds. Pushes in and then locks shut. Nice chrome. 

Kinetic Moped Magneto / Flywheel Nut -

Original Flywheel aka magneto rotor nut. Kinetic # 05168250 Dimensions:14mm L x 15mm OD

Kinetic Moped Speedometer with Back light - 50MPH

New Kinetic moped speedometer. 50mph of fun. Includes hole for a back light. Requires speedometer cables with 2mm inners and 10mm threads. Will fit 48mm Puch speedometer holders. .2Also...

Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift

Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part...

Kinetic Moped Starter Weights, Shoes / Pads - Non variated

Original starter weights for Kinetic mopeds. This is not the common version. The common starter shoes have 6mm ID post holes. *Must compare before purchasing.**4mm post hole ID...

Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR

Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended...

Kinetic Original Bronze Connecting Rod Bushing - 12 x 14 x 10

  Kinetic original bronze Con Rod bushing. Be sure to check your original before purchasing. Some models have a 10mm wrist pin and some require a 12mm wide bushing. Dimensions:12mm(11.7)...

Kinetic Original Carburetor Clamp Rubber Seal Ring

Kinetic original rubber seal ring for SHA style carburetors Found on the TFR USA. Insert this into the intake/clamp hole then your shim. Made for 12-13mm SHA carbs (19od - 16id)Kinetic #...

Kinetic Original Curved Spring Crank Washer - Behind Magneto

Kinetic original curved spring crank washer. This goes on the crank right behind the magneto. Will fit vespa piaggio mopeds as well. Keyed. Dimensions:0.2mm Thickness20mm OD Kinetic # 03144030

Kinetic Original Decompressor Plate

Kinetic original decompressor plate. Works on Vespa Ciao as well.  Kinetic # 03066010

Kinetic Original Engine Stop Switch

Original Kinetic engine kill switch.  *Please be sure to compare yours before purchasing.  Kinetic # 15103550

Kinetic Original Engine to Subframe Mount Washer / Spacer

Kinetic original engine to subframe mount washer /spacer. Multiple universal uses.  Dimensions:7mm ID18mm OD round 15mm OD flat2mm ThicknessKinetic # 03144940

Kinetic Original Front Brake Plate Spacer / Bushing

Kinetic original front brake plate spacer / bushing. Fits TFR, TFR USA, and Magnum models. Dimensions:12.5mm ID20mm OD17mm Wide

Kinetic Original Front Forks Assembly, Complete - Black Metallic

New old forks for your kinetic moped. These are all brand new but may have paint scuffs, scratches, or flakes. Some may even have bent headlight mounts, they can be bent back. Overall great...

Kinetic Original Handlebar Grip, left Hand Side

Original left hand side handlebar grip for kinetic mopeds, will fit any 22mm(7/8) handlebar. Nice and gummy. Kinetic # 15082320Recommended Accessories:Throttle Tube w/ Grip

Kinetic Original Headlight Grill, Metal - Black

Original Kinetic headlight grill. Metal with black coating*May have scratches or chips in the rubber coating, still protects the light. Dimensions:14.5cm Overall Width 10.8cm Overall...

Kinetic Original M12 x 1.25mm Nylon Lock Nut

Original Kinetic M12 x 1.25mm nylon locking nut. Originally for the Kinetic Milano scooter Will work as Tomos swingarm nuts as well.Fits Tomos Sprint 2003-2006 Sprint, LX, 2002-2004 A35 revival, All...

Kinetic Original One Speed Clutch Pulley Spacer 12 x 16 x 30

  Kinetic original one speed clutch pulley spacer / bushing / ring. Will fit Vespa Piaggio moped as well. Kinetic #03054040 Dimensions:12mm ID16mm OD30mm Long Recommended...

Kinetic Original SHA Float Bowl Gasket - 12 - 13mm Carburetors

Original Kinetic SHA float bowl gasket. This is for the smaller SHA carburetors with rectangular float bowl.Fit SHA 12mm to 13mm carbs. Kinetic # 03151060

Kinetic Original Single Speed TFR Gear Box Gasket.

  Kinetic original single speed TFR gear box gasket.  Kinetic # 03017040

Kinetic Original TFR USA Decompression Lever

Kinetic original TFR USA decompression lever.  Kinetic # 15034380

Kinetic Original Tool Box Thumb / Wing Screw -M6 x 9mm

Original Kinetic wing nut / thumb screw for securing the tool box in the rear. Could be universal for whatever you like. Dimensions:M6 x 1mm thread9mm thread length25mm wing width15mm OD...

Kinetic Pedal Crank spindle Spacer - 20mm x 20mm

Original Kinetic pedal crank spindle spacer. Made for the large 20mm spindles on the old original TFR and Magnum models. Could possibly be used on other mopeds.  *Check length before purchasing...

Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome

New LEFT chrome pedal crank arm for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.   *Warning.... Fits ONLY models with 20mm pedal axle shafts which were...

Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome

New RIGHT hand side chrome pedal crank arm for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.   *Warning.... Fits ONLY models with 20mm pedal axle shafts...

Kinetic TFR USA/Magnum engine Stop Switch/Throttle Perch Assembly

Original Kinetic TFR/Magnum engine stop switch / throttle perch assembly. This is the throttle perch, the throttle cable and tube are installed into this. Includes wiring.Kinetic #...

Kinetic TFR, Magnum Chrome Pedal Arm Set, 20mm

New old stock chrome pedal set for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.  Will also fit Avanti and Indian mopeds. *Warning. Fits ONLY models with 20mm pedal...

Kinetic Vespa Piaggio Pedal Crank Shaft Spacer - 36mm

Original Kinetic pedal crank shaft spacer. Can be used on many mopeds.  *Check length before purchasing.Dimensions:16mm ID17.5mm OD36mm LengthKinetic# 03285340

Kinetic Vintage Style Metal Spark Plug Boot, non-resistor type

New Kinetic vintage style spark plug boot / cap. Non - resisted type.** For threaded tops, simply remove the nipple on your spark plug to fit this boot.  Recommended Accessories:Spark...

M12 x 1.75mm Hex Nut - Kinetic Original Front Axle Nut

M12 x 1.75 threading Hex nut. Kinetic original front axle nut for all models. Kinetic # 92612002 Dimensions:19mm Hex10mm Thickness