Puch moped parts for Vintage and Classic mopeds sold by Sears, JC Penny and across the world.
Original Kinetic moped rear subframe mounting bushing. Fits TFR and TFR USA. You need (2) per machine.
Dimensions:36mm Overall Length25mm OD12mm ID
Kinetic # 03158010
Nice clean Black Bullet Headlight now available. Non-sealed beam bulb allows for easy replacement. Dual filament style for low and high beam applications.
Dimensions: Measure first!Diameter = 103mm / 4.05"Length = 138mm / 5.43"Speedo Hole = 48mm /...
Original Kinetic Acorn nut. Use anywhere you need. Will fit Puch and Tomos mopeds as well.
Dimensions:M8 x 1.25 Threading13mm Hex15mm Height
Kinetic # 93608001Tomos # 030019
Hardware for mounting the top of you Kinetic moped's shocks. Kit Includes: (All M8)2 x Acorn nuts2 x Lock washers2 x Flat washers2 x Very thin plastic spacers (Most are yellow and oblong from casting and storage)
New black metal replacement rear (left) brake lever for your Tomos A3, Puch Maxi, and some other Magura style perches. Please compare before purchasing.
Overall length - 132mm
Recommended Accessories: Cable stop / Nipple
Puch Maxi Kickstand. Meant only for E50 models.8" (7.7) LengthReplaces Puch# 322.214.171.1240.2/30
Side kickstand for Puch Maxi mopeds. 8.7" (220mm) stand will have it sitting just right.Black mounting clamp and black shaft.
12mm x 1mm left flow petcock for many mopeds, same 12mm thread as Tomos Revival, Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and...
Chrome metal mesh high flow air filter made for for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers*
Dimensions:With reducing bushing will fit...
Puch Maxi S moped tank decal set. One for each side. Could be used on any other Puch as well.Actual decal dimensions are 205mm Long by 25mm Wide.
Puch Moped 70cc Performance Package
This kit is for all Puch E50 and ZA50 engined mopeds like the Maxi, Newport, Magnum, Murray, Bombardier, Pinto, Swinger and similar JC Penny / Sears models. Easily increase top speed and mid-range power.
New Kinetic moped speedometer. 50mph of fun. Includes hole for a back light. Requires speedometer cables with 2mm inners and 10mm threads. Will fit 48mm Puch speedometer holders. .2Also fits Bullet Headlights. for custom applications.
NOS 25 watt Sealed beam replacement bulb for the CEV round and bullet headlights, luxor, as well as others.
This one is for 6v applications.
Actual diameter is 4.5"
Made by GE 4767-1
Great universal exhaust to boost performance.
Clamp it on with a 28mm headers that are available for Puch, Tomos and Sachs. Or clamp or weld it to your existing header.
People have used them on Kinetics, Sachs, Motobecane, Tomos, Honda...
New Kinetic vintage style spark plug boot / cap.Non - resisted type.
Recommended Accessories:Spark PlugsSpark Plug Wire
NOS chrome pedal crank arms. Made for Sachs and Columbia mopeds, but works on almost all mopeds, and clears most performance exhausts. Pretty much everything with 16mm sized cranks. Large offsets and long arms
Dimensions:160mm long (L)170mm long (R)47mm...