SUPERTEC

Black Low Rise Handlebars for Mopeds and Small Motorcycles

Low rise bars  perfect for custom projects and mean street racers.  Low profile to make your moped not look so much like a moped.   Even works well on smaller motorcycles like RD's,...

M Handlebar *Black* for mopeds and small motorcycles

Classic M shape for the cafe racer sporty look.  The handlebars are flat, but can be angled in the mount to adjust for drop / pullback.  Moped sized, but works well with smaller motorcycles...

10mm Petcock Left Flow Fuel Valve - Peugeot 103/MBK

10mm Petcock for Peugeot and Motobecane mopedsfuel flows out to the left  for a 6mm fuel line.on / off / reserve10mm x 1mm threadThe same thread works on numerous other mopeds and vintage...

12mm x 1.00mm Right Flow Fuel Petcock *Round Knob*

Replacement 12mm Right hand flow petcock. Tomos Revival, Streetmate, Targa, Targa LX, Sprint, Flexer, Arrow, Sachs Hercules, Columbia Commuter,  Honda hobbit, camino, PA50, PA50II,...

17mm Bing Air Filter Screen Replacement - 60mm OD

Replacement filter screen for 17mm Bing carburetors found on models such as the Puch Magnum and Monza. Dimensions:60mm OD 10mm Thick

20mm x 1mm Petcock, Bottom/Down Flow - Jawa

Replacement 20mm x 1mm Bottom/Down flow Petcock for the Jawa 50 Classic.6mm Fuel barb.

28mm Red and Chrome Metal Mesh Air Filter

 Metal mesh high flow design for long lasting and easy cleaning.  28mm internal diameter will clamp down 22mm-28mm. 24-29mm opening 64mm Overall length 51mm Small end diameter 60mm...

3/16-1/4" Fuel Filter, Compact Clear Body - Fine Mesh Screen

Compact 3/16-1/4"  fuel filter for tight places. Fine metal mesh filter screen. Great protection from old tanks.  Make sure to pick up some fresh fuel line.Dimensions:54mm...

35mm Black Metal Mesh Air Filter, TOMOS A55 PHVA, PHBG

For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning. Will fit 32-36mm filter mounts.67mm overall length.61mm Rear cone...

35mm Red Metal Mesh Air Filter, TOMOS A55 PHVA, PHBG

For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning.Will fit 32-36mm filter mounts.Dimensions:67mm Overall length.61mm Rear...

42mm Chrome Air Filter for Mikuni VM and TM carburetors

K&N style metal mesh air filter perfect for the Mikuni VM and TM flat slide carburetors. High Flow and easy to clean. Mounting I.D. measures 42mm.  Can be fitted +/- 1-2mm Total Length of...

48mm Red and Chrome Metal Mesh Air Filter K&N Style

Fits all OKO carburetors. Metal mesh high flow design for improved performance, long lasting and easy cleaning.   48-50mm opening 85mm Overall length 50mm Small end diameter 74mm Large end...

Black Classic Moped Handlebar

Classic 7/8" moped handlebars. Great replacement  for Vespa Citta and Honda Hobbit/Camino mopeds.  24" end to end width3.75" mounting area width3" pullback11.5" Rise

Black Classic Moped Handlebar with Cross Bar. *Large*

Classic 7/8" moped handlebars with cross bar brace.  BMX / Motocross style!  Similar bars found on the  Puch Macho and Tomos QuadroDimensions:26" end to end width4" mounting area...

Chrome Classic Handlebars - Honda, Vespa, Etc

Universal classic chrome 7/8" handlebars. Great replacement for Vespa Citta and Honda Hobbit/Camino mopeds. 24" end to end width3.75" mounting area width3" pullback11.5" Rise

Chrome Classic Moped Handlebars

Description: Super rad stock like classic bars. Chrome and shiny. Diameter 7/8th"  Width:25.25" Rise 9.5" Pullback 2.75" Center Mount Widt: 3.25"

Classic Moped Pedal Set - No Reflectors

Classic style pedals with no reflectors for stealth riders.   Fits 99% of mopeds.   9/16th threads. Comes with left and right pedals.Dimensions:Tip to tip length - 135mmPedal...

Fuel Petcock 12mm x 1.00mm, Rear Flow with Bowl

Rear flow style petcock with removable metal bowl.  This helps catches larger debris and prevents it from entering the carburetor. Perfect for Honda hobbit, camino, PA50, PA50ii and garelli...

Fuel Petcock 14mm x 1mm Left Flow - MB5

Replacement 14mm x 1mm Left Flow fuel petcock for Honda MB5 MT50, NA50, NC50, etc. *Be sure to compare before purchasing.*non-oem

Honda Hobbit, / Camino Toothed Performance Drive Belt

Perfect sized replacement toothed belt to prevent slipping and help put power to the ground with stock or performance engines.Endurance belt by Supertec Dimensions:15mm W x 10mm H x 1070mm L Fits:...

Honda mb5 / MB50 / NSR50 Headset/Steering Stem Bearing Kit

Replacement(non Honda oem) headset for Honda MB5 and NSR50. *You must check your specs before ordering.*

Honda MB5 / MT50 Air Intake Rubber Coupler - V2

Replacement air intake rubber coupler for Honda MB5 airbox. Version 2 This version is ribbed and fits 16mm Mikuni carburetors.Dimensions:Fits 28-30mm air filters70mm Long

Honda MB5 / MT50 Rear Brake Linkage Arm Assembly - Chrome

Aftermarket replacement rear brake linkage arm for Honda Mb5 mopeds. May be able to use on other mopeds for many things. Dimensions:19" Long

Honda MB5 Speedometer Cable, 75CM

Replacement speedometer cable for Honda MB5.Not Honda oem. Dimensions:2.5mm Inner cable75cm Length

Motobecane Drive Belt - D19

Motobecaneo D19 drive belt for fixed / non-variating engines. Stock Belt for MBK AV / AU 32-33-34-41-42-43-44-51-54-55-65-75-76-85 785mm L x 14W x 7H  

Puch E50 Kickstart Lever Rubber Replacement

Replacement foot rubber for the Kickstart lever on Puch E50 kickstart powered mopeds. 

Puch Front Sprocket - 15 Tooth

Quality 15 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines. 

Puch Front Sprocket - 16 Tooth

Quality 16 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines. 

Puch Front Sprocket - 17 Tooth

Quality 17 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines. 

Puch Front Sprocket - 18 Tooth

Quality 18 tooth front sprocket for Puch Maxi. Will fit the E50 and ZA50 engines.  *You WILL need to grind/file the case for this to fit.

Puch Maxi Side Kickstand 8.7" - Chrome

Side kickstand for Puch Maxi mopeds. 8.7 inch stand will have it sitting just right. Black mounting clamp and chrome shaft. 

Puch Moped VDO Speedometer Cable - 60cm

Puch moped VDO speedometer cable - 60cm Inner cable is 1.6mm and the threads are 10mm *A little too short for a maxi/newport.  For stock applications, best to get the 70cm or larger*  

Puch Moped VDO Speedometer Cable - 70cm

Puch moped VDO speedometer cable - 70cm Inner cable is 1.6mm and threads are 10mm Perfect size for the Maxi, Newport and simialr models.  Too short for a Magnum.

Puch Replacement Rubber Foot Peg Set - Black

Replacement rubber foot pegs for Puch mopeds. Comes with 2 for a set.   Gloss Black

Puch Stock Air Filter Box - Korado / Z-ONE

Replacement air intake filter box for Puch Korado / Z-ONE mopeds with stock Bing carburetors.Fits 20mm Bing with included bushing or fits 28mm with no bushing.

Puch Stock Air Filter Box - Maxi

Replacement air intake filter box for Puch Maxi mopeds with stock Bing carburetors. 

Puch VDO Speedometer Cable - 85cm

Speedometer cabke for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier etc. as well as Sachs and Kreidler For VDO speedometers 850mm Long = 85cm 1...

Tomos 12mm Speedo Drive, A3, A35 and some A55 Mopeds

Replacement Tomos 12mm left hand speedo drive unit for a35, a3 and some a55 mopeds... ID of axle hole is 12mm speedo cable threads are 10mm x 1mm speedo cable driver end is 2mm x...

Tomos A3 / A35 Exhaust Support Bracket - Possibly Universal

Tomos A3 A35 exhaust support/custom mount bracket. This was an original item on some Tomos A3 and A35 mopeds. You can use this as an adapter or for anything you see fit.Great for fitting Tecnigas...

Tomos A35 A55 22T Rear Sprocket

22T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare. Color of sprocket may vary depending on stock. Aluminum or coated finish.Best for top speed with out...