Original Dellorto gasket set for PHBN carburetors. Comes with shown.
Dellorto Part # 52620
60mm Uni pod style air filter. Works on 60mm openings like those found on SHA carburetors.
Dimensions:80mm overall length74mm outer diameterAccordion style filter - will squish.
Choke lever return spring for 14mm, 15mm, and 16mm SHA carburetors.Tomos # 219591
This is an original Peugeot 103 moped reed valve with metal reeds. Stock cylinders with small original carbs only.
Intake for bolt on Mikuni flange style carburetors 18-20mm only. Oil injection or boost bootle inlet on side. Can be capped off if not need. Fits: MB5, NSR50, NS-1 and similar engines.20mm ID.Dimensions:M6 studs with a 47mm spacing(center to...
NOS Gurtner air filter screen for all 25mph 50V and all Pre 1977 30mph Motobecane mopeds fitted with the Gurtner AR2-12-705 Center Mount Carburetor.Fits AR2-12-705 carburetors and 1950’s Gurtner AR10-501, Gurtner AR13-488 - 1961 AV87...
Original Tomos straight intake with oil injection hole for Tomos mopeds with A35 engines.
ID - 12mmOD - 18mmM5 Oil Injection holeTomos # 227592
15mm Clone Dellorto SHA cable choke carburetor. Use this on moped with an existing choke lever or purchase a lever and cable to convert. The same carburetor was also found original on most Garelli, Minarelli and can be also be used on Puch, Motobecane,...
Quality fuel line styled after Motion Pro Tygon fuel line. Thick, playable, holds tight. Hose clamps are normally not needed. Use small zip ties for extra protection.
Make sure to pick up a in-line FUEL FILTER.
Compact fuel filter for tight places. Nice metal top, clear plastic body.
6mm or 1/4" Make sure to pick up some fresh fuel line.
Original 12mm Gurtner Carburetor for Motobecane Mopeds with an AV7 engine.
Made in France.
Stock reed valve block for Motobecane AV10 Cylinder kits.
Rubber seal for SHA carburetors, 14.12, 15.15, 16.16 . . .
Tomos # 21327
Recommended Accessories :
1.5mm thick shim for newer style SHA carburetors, 14.12, 15.15, 16.16 . . .
Will not fit old 14.12 carburetors.The correct size for Tomos A35 IntakesOD - 21mmID - 18mm
Tomos # 227326
Air filter adapter for Dellorto PHBG carburetors. Screw this on and use any 60mm air filter. I suppose you could use this as a velocity stack.
60mm filter clamp diameter. Screws on to any PHBG carburetor.
Cable choke assembly for Dellorto PHVA carburetors. Use it to rebuild a broken cable choke PHVA carb or convert a PHVA lever choke.
*Includes only what you see in the picture.
Tomos # 243152