Engine

Puch / Tomos 50cc 38mm Cylinder Head

This replacement original style 38mm, 50cc high cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also can be used  on all Tomos A3, A35 and...

Puch High Compression Cylinder Head- 45mm /70cc

This 70cc 45mm high compression cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also fits on Tomos Should be paired with 70cc cylinder...

Tomos A35, A55 Electric Starter Motor - Streetmate

Aftermarket replacement starter motor for most Tomos mopeds with electric start. Originally for the A55 Streetmate.*Be sure to compare before purchasingReplaces Tomos # 237133

Tomos A35 Chain Protection Plate / Electric Mount- Black

Chain protection / electric mounting plate for Tomos A35 Engines. Suitable for voltage regulator, relay etc. Tomos Part Number - 237224

Tomos A3 A35 screw M6x8 mm

Tomos A3 A35 screw, Phillips head. M6x8mm

12mm Single End Piston Circlips Pair - Tomos

Single end circlip for use with 12mm stock or performance kits. 12mm for Tomos mopeds. *Sold in Pairs*

Tomos A35 38mm Airsal Piston Kit - 50cc

Airsal piston kit for 38mm Tomos A35 cylinder kits. Comes with everything shown.38mm diameter. 12mm wrist pin. 

Tomos Engine Oil Seal Set Tomos A3 A35 A55

Tomos engine oil seal replacement kit. Includes crank seals, output shaft seal, and distance bushing. NO pedal crank seal. Dimensions:(x2) 17ID x 35OD x 7W Seals35ID x 47OD x 7W Seal30ID x 35OD x 11W Bushing

Tomos A35 Meteor Piston - 38mm

Meteor performance piston kit for 38mm Tomos A35 cylinder kits. Comes with everything shown.38mm diameter.12mm wrist pin. 

Tomos A3 Meteor Piston - 38mm 10 pin

Replacement Meteor piston kit for Tomos A3 mopeds.  Replaces Tomos # 207403  Includes piston, rings, 10mm wrist pin, and cir-clips.Dimensions:38mm piston10mm wrist pin23mm wrist pin eye to top ridge50mm overall length47mm overall not...

Tomos A3 Crankshaft Connecting Rod - 10mm

Replacement Tomos A3 crankshaft connecting rod. 10mm wrist pin. Recommended Accessories:A3 cylinder optionsA3 gasket options

Tomos A3 38mm 50cc Cast Iron Cylinder

Cast iron 38mm 50cc piston port cylinder for Tomos A3 mopeds. Pretty rough ports but will get you up and running or clean / port for a stock performance upgrade.*This is the cylinder only. Recommended Accessories: Piston Kit Gasket Set  

NOS Puch Connecting Rod Kit - Ricambi

NOS High quality Connecting rod kit for Puch Maxi and Tomos mopeds.  Great upgrade for Puch to ditch your wrist pin bushing for a reliable bearing.Includes:  con rod, wrist pin, (x2) needle bearings. Small end(top): 21.3mm OD / 15mm IDLarge...

Tomos A3 50cc 38mm Cylinder Head, Cast Iron - Black

Replacement Tomos A3 50cc 38mm cylinder head. Black chipped paint but good condition. Tomos # 217123 Recommended Accessories:A3 Stock Cylinder38mm PistonSpark PlugsA3 50cc Top End Gasket SetComplete A3 Gasket KitL17 Case BearingEngine Oil Seal...

Tomos A3 Crankshaft, Stock - 10mm

10 pin stock crankshaft for tomos A3 mopeds. Recommended Accessories:A3 Stock Cylinder & 38mm PistonA3 70cc Reed Valve Cylinder Kit L17 Case BearingEngine Oil Seal SetPost 1986 Crank Bearing and Seal set

Tomos APN 38mm 50cc Piston Port Cylinder

Cast iron 38mm 50cc piston port cylinder for Tomos APN mopeds. Pretty rough ports but will get you up and running or clean / port for a stock performance upgrade.*This is the cylinder only. Recommended Accessories:Performance Intake

Tomos A35 Moped 70cc Reed Style Cylinder Kit, Head, Carburetor & Exhaust Package

Tomos A35 70cc Complete Performance Package This kit is for all Tomos mopeds with the A35 engine, Targa, Targa LX, Sprint,Colibri, Classic TT, etc. Will not fit the Revival without modification to the exhaust... Easily increase top speed and mid-range...

38mm x 2mm GI Piston Ring Set

Replacement piston ring set Tomos A3 mopeds. Fits Puch (except hi-torque late models with L-ring upper), Sachs 504, 505 1A,1B (both) and 1C,1D (lower only) Comes with two rings. 38mm x 2mm GI Always measure and compare before ordering. Tomos # 203300

NSK L17 Moped Brass Crank Case Bearing - Puch ZA50 & Tomos A3

NSK L17 brass bearing. Used For Tomos A3 crank cases. Also used in Puch ZA50 engines on the magneto side(left.)**Be sure to compare before purchasing.Dimensions:17mm I.D.40mm O.D.10mm WidthTomos # 044370

Universal Complete Cylinder Stud / Washer / Nut Set m7 x 115mm

 Universal Cylinder stud set. Includes washers and nuts. Nuts have convenient cap to prevent rust. Replaces Tomos cylinder studs for A35 and A3 models. Also good for Peugeot mopeds.*Be sure to compare before purchasing. Includes:4 x 7mm x 115mm...

Original 50cc Copper / Fiber Head Gasket for Puch & Tomos - 1.2mm

50cc Aluminum head gasket for Tomos with A3, A35, and A55 Engines as well as Puch mopeds with E50 Engines.1.2mm

NOS Tomos A35 / A55 Oil Injection Pump - Dellorto

Hello, Dellorto brand oil injection pump for Tomos mopeds. Will fit A35 and A55 engines. Please be sure to compare yours before purchasing.    *Includes only whats in the picture.  Tomos # 236513 or 217310

Tomos A3 Airsal 44mm 70cc Moped Piston Kit - 10mm Wrist pin

Airsal 44mm 70cc piston kit with 10mm wrist pin for Airsal 44mm cylinder kit.   Recommended Accessories: 44mm A3 Airsal Cylinder Kit

Tomos A55 70cc 44mm Airsal Cylinder Head

Airsal 44mm cylinder head for your Airsal 70cc kit.   Fits the Tomos A55, A3, A35 and even Puch with 44mm -45mm cylinder kits.    

NOS Original Tomos A35 Moped 38.5mm Piston Kit - 12mm Wrist pin

NOS Original stock 38.5mm piston kit for Tomos A35 mopeds. 12mm wrist pindistance from top (not including crown) to center of wrist pin opening = 23mmtotal length (including crown) = 50mm Tomos # 223747

Wrist Pin Bearing, Honda MB5 / NSR50 / NS-1 / NS50f 12 x 17 x 13

Racing wrist pin needle bearing for the crankshaft connecting rod, commonly referred to as the con rod. This bearing will fit: Honda NSR50, NS-1, NS50F, MT50, MB5, MB50, MTX50, X8R, SFX, Bali.Kymco DJY50, KB, K12, Heroism, Top Boy, Dink.Piaggio...

Tomos A3 Airsal 44mm 70cc Moped Cylinder Kit - 10mm Wrist pin

Airsal 44mm 70cc cylinder kit with 10mm wrist pin for your A3 powered Tomos. Finally an easy solution for A3 performance. This kit includes the cylinder, piston, rings, wrist pin, clips, gaskets, exhaust studs, reed block, and reeds...

Original Tomos Wrist Pin Bearing, 12 x 15 x 15

NOS original Tomos wrist pin bearing for the cranshaft connecting rod, commonly referred to as the con rod. This bearing will fit Tomos A35, A55 Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing. 12 x 15 x 15   12= I...

12mm Wrist Pin, NOS Tomos and Puch replacement

New old stock 12mm wrist pin. 12mm Diameter x 30.9mm Long This is good on Puch and Tomos 12mm con rods. Please measure and be sure you need this. *Might need a polish from years in a bag on the self but, no pitting, no scrapes, no issues...

Piston Wrist Pin Bearing, 12 x 15 x 15

Wrist pin bearing for the crankshaft connecting rod, commonly referred to as the con rod. 12x15x15 12=ID 15 =OD 15 =Width This bearing will fit: Tomos A35, A55, Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing.Honda...

Wrist Pin Bearing, Racing Style 10 x 14 x 13

Racing wrist pin needle bearing for the cranshaft connecting rod, commonly referred to as the con rod. This bearing will fit Tomos A3, Honda, some Vespa, Peugeot, and many mopeds with  10mm wrist pins. 10 x 14 x 13   10= I.D  14 = O.D...

Wrist Pin Needle Bearing, 10 x 14 x 13

Standard wrist pin needle bearing for the crankshaft connecting rod, commonly referred to as the con rod.This bearing will fit Tomos A3, Honda, some Vespa, Peugeot, and many mopeds with 10mm wrist pins. 10 x 14 x 13   10= I.D  14 = O.D. 13 =...

Tomos Original Magneto / Flywheel Cover A35 Pedal Start w/ Oil Injection

NOS Tomos magneto cover for 2003 - 2006 A35 equipped Pedal start Sprint and LX mopeds.This is the threaded inlet style cover. Tomos Part # 230925

45mm 70cc Aluminum Head Gasket for Puch, and Tomos

Aluminum 70ccc 45mm head gasket. Fits: Puch- with E50 or ZA50 Engines Tomos- with A3, A35, A55 Engines  

45mm x 1.5mm GI Piston Ring

Replacement 45mm piston ring for Puch DMP, K-Star and TCCD , Motobecane Airsal, Tomos A35 45mm, Sachs Athena  and the Honda MB5 Airsal cylinder kits.    Only 1 ring per package!   

Tomos A35 Alukit 70cc Piston Kit - 44mm

Replacement piston kit for 44mm Aluki, Airsal , DMP and similar Tomos A35 44mm 70cc cylinder kits. Comes with everything shown. 44mm diameter. 12mm wrist pin.  Replacement Rings

DMP Tomos A35 50cc Aluminum Cylinder Kit, 38mm

Replace your worn out or damaged stock cast iron cylinder with this high tech light aluminum type.   Nikasil coated for best performance, reliability and long wear.  This kit is for all Tomos mopeds with the A35 engine. This does not work...

Complete Cylinder Stud Set, Tomos A3, A35 Mopeds M7 x 105mm

Tomos A3, A35 cylinder stud set Includes: 4 x 7mm x 105mm Cylinder Studs 4 x 7mm Washers 4 x 7mm Nuts  

K-Star Puch / Tomos 50cc 38mm High Comp Cylinder Head

This 38mm, 50cc high compression cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also works on all Tomos A3, A35 and A55 Engines. Tech...

Puch / Tomos 50cc 38mm High Comp. Cylinder Head

This 38mm, 50cc high compression cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also works on all Tomos A3, A35 and A55 Engines. Tech...