Puch moped parts for Vintage and Classic mopeds sold by Sears, JC Penny and across the world.
NOS starter clutch adjuster nut for Puch 2-speed ZA50 engines.*This is the adjuster nut only, as pictured.
Stud and nut kit to install your Tomos, Puch or similar exhaust.
This kit includes:(2) Nuts 12.5mm Long(2) Studs M6x 32mm Long
Tall M6 x 12.5mm bass exhaust nuts. Can also be used on most intakes.
6mm engine studs fit almost all cylinders and kits...
New old stock original Tomos A3 (1977 - 1991) moped right hand side plastic brake lever.Made by Domino
* Came stock on many other mopeds. Please compare before purchasing.
Knarp - 8mmx15mm
NOS black plastic lever for Magura style perches. Please compare before purchasing.
Overall length - 91.5mmLever only Length - 79mm
Made in Germany
Universal Throttle / Choke / Decomp Cable
Original Puch switch base made in Germany by Magura. Includes metal clamp and screws. This is for the Right hand side on many old Puch mopeds. Normally pre 77.
OEM: Magura Part # 349.1.54.018.0
Original Leleu Brake check hole cap. Leleu hubs can be found on many mopeds like Puch, Motobecane, and honda.Recommended Accessories:Leleu Front Hub
Original Puch switch base made in Germany by Magura. Includes metal clamp and screws. This is for the left hand side on many old Puch mopeds. Normally pre 77.
OEM: Magura Part # 3184.108.40.2068.0
6V 21W single filament bulb. Most commonly used bulb in taillights, also found in some headlights. Check your size and base before ordering, this bulb has many fitments and uses. BA15s or 1156 Base. Same bulb type.
Puch # 41163002
This Puch throttle cable fits mopeds with original style controls and Bing carbs. Double ended throttle cable for puchs with original style controls and Bing carbs. Teflon coated for smooth operation. Works on most Maxi, Pinto, Newport and...
NOS Puch connecting rod bushing. Comes with one lubrication hole.Will fit Vespa Piaggio mopeds such as the Ciao, Grande, Si, and Bravo. *Must have 12mm wrist pin. Dimensions:11.7mm Inner Diameter14mm Outer Diameter12mm Long**If you do not check the...
This is a completely universal switch that has a center position, left position, and right position. So you have 3 options for wiring. This version is a chrome plastic.Make this a kill switch, light switch, turn signal switch, or any other ideas you...
This is a completely universal switch that has a center position, left position, and right position. So you have 3 options for wiring. This version is a dark grey.Make this a kill switch, light switch, turn signal switch, or any other ideas you...
Chrome universal 22mm or 7/8" moped handlebars. ZZ top thinks these are the business.
23" End to end7.5" Hand grip area6.5" Mounting area3.5" Pullback4" Rise
50cc Aluminum head gasket for Tomos with A3 and A35 Engines as well as Puch mopeds with E50 Engines.
This tool is designed to bore out a new connecting rod bushing in order to fit your wrist pin. Old Puch mopeds used copper bushing in the connecting rod and when they went bad either this was used to remove the old one or used to bore out a new one...
fabric Puch logo with lightening bolt patch.Nicely made piece. Dimensions:84mm Long x 39mm Wide.