25mm chrome metal mesh high flow air filter with removable reducer bushing.Perfect size for Puch Bing Carburetors. 12mm, 14mm or 15mm.**May or may not fit under your side covers.
Dimensions:25mm ID. Will clamp down to fit up to 28mm.Included...
Original Kinetic moped air filter box assembly. Includes air box body, intake duct, and air filter retainer. Fits Kinetic carburetors and 13.13mm or smaller Dellorto carbs.Dimensions:50mm air filter opening104mm height with duct95mm width26mm...
NOS original Tomos air filter for the Encarwi carburetor.
52mm x 10mmTomos # 200384 *etched into the side of the filter.
60mm Uni pod style air filter. Works on 60mm openings like those found on SHA carburetors.
Dimensions:80mm overall length74mm outer diameterAccordion style filter - will squish.
For PHVA, carburetors, but will also clamp down onto the PHBG type. Metal mesh design for long lasting and easy cleaning.
Will fit 32-36mm filter mounts.
67mm overall length.
61mm Rear cone widest diameter.
50mm front cone widest...
This is an original air filter for Tomos A35 mopeds. Fits in the stock air box.
This dry filter is not pre-oiled.
Tomos # 229704
Metal mesh high flow design for long lasting and easy cleaning.
28mm internal diameter will clamp down 22mm-28mm.
64mm Overall length
51mm Small end diameter
60mm Large end diameter
Fits all OKO carburetors. Metal mesh high flow design for improved performance, long lasting and easy cleaning.
85mm Overall length
50mm Small end diameter
74mm Large end diameter
45mm air Filter For Mikuni Carburetors like the VM 20, 22, and 24 as well as the TM28
Filter itself is 50mm long.
Stock air filter for Honda PA50I, PA50II, Hobbit and Camino.
Replace your worn out, broken down filter with a fresh one.
Air filter for the Dellorto SHA 14.12, 14.14, 15.15 and 16.16 and similar.
Also works with clone carburetors.
Dellorto # 6117
Polini made air filter for the Vespa Ciao, Bravo when using a PHBG type carburetor. Could be also used for special occasions where a compact air box is needed.
This it the stock air filter and cover for the Dellorto SHA style carburetor. It will work on the SHA 14.9, 14.12, 14.14, 15.15, 16.16. This filter is found commonly on Italian mopeds, and Tomos A35 models with the Dellorto carb. To replace...
Metal Mesh, K & N style Hi Flow air filter for the SHA 14.12- 16.16 carburetors OD = 74mmID = 60mmlength = 81mm Perfect for Tomos, Garelli and other mopeds that use this type of carburetor.
Include plastic clear cover to keep the elements out...
Speed upgrade kit for your Tomos A55 LX, Arrow, Revival, Spint, ST, and Streetmate. Bascially any Tomos A55 based newer moped will really benefit from this. Works great to de-restrict stock setup. Increased performance with after market...