Moped Make / Model

Puch Maxi Floorboard / Center Foot Rest White - Fits European models

This is a white center floorboard piece for Puch Maxi mopeds. This is for the European model Maxi. The American version has bars that are about 1" too wide. maybe you can get creative. 

Tomos A55 70cc Airsal Speed Package w/ 17.5 Dellorto PHVA Carburetor Spark Plug Jets & Biturbo Exhaust

Quality upgrade kit for A55 powered Tomos mopeds.    Package Includes: Airsal 70cc Cylinder Kit Dellorto 17.5 PHVA Carburetor A55 Birturbo Exhaust 3 Main Jets for Tuning NGK Spark Plug   Recommended accessories:  27 Tooth...

Honda PA50 Hobbit Autisa 60cc Cylinder Kit 44mm

Autisa brand 44mm cylinder kit. It's aluminium with a cast iron sleeve. Fits like a stock cylinder, but with a boost of 10 additional cc of power.  Fits: PA50II, Camino / Hobbit, PX50, QR50.  Also will fit the NC and NU50 Express mopeds...

NOS Original Puch Maxi Fork Set - Silver

NOS original forks for Puch mopeds. This will fit the Maxi, newport and similar models.  Nice silver paint and rust free chrome. 

Puch Athena 15mm Intake for SHA Carburetors

Top quality Athena Intake for Puch E50 engines.  Square port gasket. Made for clamp style carburetors like SHA 15 / 16mm , but may work with others. Please compare before purchasing.    ID - 15mm OD - 19mmm   Recommended...

NOS Tomos Engine Cowl Fairing Scoop - Blue

Tomos NOS blue engine cowl with U shaped cutout. Typically was found on  the A35 and A3 Targa and Targa LX. Mounting holes:  195mm Engine hole opening:  155mm   Tomos#  229168 229168Blue   *a few of these are scuffed...

Tomos A3 / A35 Exhaust Support Bracket - Possibly Universal

Tomos A3 A35 exhaust support/custom mount bracket. This was an original item on some Tomos A3 and A35 mopeds. You can use this as an adapter or for anything you see fit.Great for fitting Tecnigas exhausts on A3 model Tomos mopeds. Black 40mm eye to eyeM6...

NOS Tomos Engine Cowl Fairing Scoop - Cherry Red

Tomos NOS cherry red engine cowl with U shaped cutout. Typically was found on  the A35 and A3 Targa and Targa LX. Mounting holes:  195mm Engine hole opening:  155mm   Tomos#  229168 229168red   *a few of these are...

Puch Maxi Red Side Panel Set

Red side panels for the Puch Maxi, Newport and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum.Red is hot. Recommended Accessories:Short Mounting BoltLong Mounting Bolt

Domino Tomos A3, Vesap SI Moped Left Brake Lever - Black Plastic

Original Tomos A3 (1977 - 1991) and Piaggio Vespa SI moped Left side plastic brake lever.   Made by Domino * Came stock on many Tomos mopeds. Please compare before purchasing.  Tomos #...

NOS Tomos A35 Moped Right Side Brake Lever - Black Plastic

New old stock original Tomos A35 moped Right side plastic brake lever. * Came stock on many Tomos mopeds. Please compare before purchasing.  Tomos # 223705   Recommended Accessories:  Cabble Nipple - 8mmx15mm

NOS Tomos A35 Moped Left Side Brake Lever - Black Plastic

New old stock original Tomos A35 moped left side plastic brake lever. * Came stock on many Tomos mopeds. Please compare before purchasing.  Tomos # 223704 Will fit Tomos lever base # 223702 Lever for Tomos #...

NOS Tomos Foot Peg Support Bracket - A35 Mopeds

Original Tomos foot peg support bracket, made for the A35 mopeds. 59mm distance between mounting brackets. 220mm long post.  *May fit other A35 models. Research and compare.  Tomos # 227051

NOS Tomos Foot Peg Support Bracket - A3 Bullet

Original Tomos foot peg support bracket, made for the A3 Bullet moped (1977-1991) 59mm distance between mounting brackets. 220mm long post.  *May fit other A3 and A35 models. Research and compare.  Tomos # 211542

NOS Original Tomos Moped Kick Start Bushing A35 / A55, 223448

NOS original Tomos kick start distance bushing. Located behind the sprocket on your engine. Fits A55 and A35 mopeds.  28mm Long 18mm Outside Diameter 16mm Inside Diameter   Tomos # 223448

NOS Tomos Original Titan Fork Lock and Key Set Pre 2003 A35, 209783

NOS original Titan fork lock set for early A35 Tomos mopeds.  Does not fit the bullet or colibri. 16mm DiameterTomos # 209783

Original Tomos A35 / A55 Complete 1st Gear Clutch Assembly

OEM Tomos complete 1st gear clutch assembly.  Will fit A35 and A55 engine models. Tomos part # 227018 (A35) & 227849 (A55) Tech Tip:  Soak in ATF/ gear oil overnight before use Recommended accesories:  2nd Gear...

KMC 415 x 122 Link Drive Chain - Chrome

Top Quality KMC  drive chain for Tomos mopeds as well as others with the same type.  Comes with masterlink. Chain size varies depending on gearing, make and model.  Please check specifications and or count links before ordering. ...

Universal 12v DC Horn for mopeds and more - Black

Universal replacement 12v DC horn.   Will work with any moped / motorcycle with a 12v system. Low gloss black in color   

NOS Tomos 24T Rear Sprocket A3 A35 A55 Mopeds

24T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare. Color of sprocket may vary depending on stock. Aluminum or coated finish. Made for post 2002 Revival mopeds, but will fit many other Tomos wheels. Tomos #...

NOS Tomos Black M6 Cable Adjuster

NOS slotted cable adjuster for Domino / Tomos and others with 6mm thread type. Total Length = 30.5mm Thread length = 20mm   Tomos # 229556  

Tomos A35 / A55 Moped Countershaft 1st Gear

1st speed gear for Tomos A35 and A55 engines. **No center bushing.**  Tomos # 227194

Exhaust Gasket for Puch, Tomos, & More 24mm

This gasket is used on Minarelli, Derbi, Puch, Tomos, Garelli, and Morini mopeds. This is an upgrade to the stock 20 or 23mm gasket. 24mm  I.D.   2mm Thickness. 43mm center hole to center hole. Tomos # 203862 , 227149   Recommended...

NOS Original Tomos A35 Moped 38.5mm Piston Kit - 12mm Wrist pin

NOS Original stock 38.5mm piston kit for Tomos A35 mopeds. 12mm wrist pindistance from top (not including crown) to center of wrist pin opening = 23mmtotal length (including crown) = 50mm Tomos # 223747

Universal Moped Exhaust Pipe Clamp 30mm

Universal exhaust clamp, no hardware included. Clamp it on with a 30mm headers.

Universal Moped Exhaust Pipe Clamp 28mm

Universal exhaust clamp, no hardware included. Clamp it on with a 28mm headers that are available for Puch, Tomos and Sachs.

Buzzetti 17mm Magneto Flywheel Puller for Vespa Piaggio

High Quality 17mm puller tool for Vespa Piaggio Ciao, Citta, SI, and Kinetic mopeds.17mm x 1 threading Buzzetti # 5255

Wrist Pin Bearing, Honda MB5 / NSR50 / NS-1 / NS50f 12 x 17 x 13

Racing wrist pin needle bearing for the crankshaft connecting rod, commonly referred to as the con rod. This bearing will fit: Honda NSR50, NS-1, NS50F, MT50, MB5, MB50, MTX50, X8R, SFX, Bali.Kymco DJY50, KB, K12, Heroism, Top Boy, Dink.Piaggio...

NOS Puch Bulb Socket Clip for Non-Sealed Moped Headlights

Non-sealed Headlight socket Clip for CEV headlights. Puch Part # 349.2.53.807.1 For:  CEV 2157B Headlamp found on some models of: Batavus, Beta, Bianchi, Cimatti, Fantic, Garelli, Intramotor, Italjet, Malaguti, Motron, Negrini,...

NOS Sachs 504 Cylinder Stud M8 Threads 104mm Length *each*

Sachs cylinder stud for the 504 engine. The stud is 7mm, the threads are 8mm and it is a flat head screw driver top.    *Sold each*Please be sure to compare before purchasing Thread Diameter: 8mm Part Length: 104mm    

NOS Puch Cobra / Monza Cylinder Stud m7 + m8 threads, 138mm Length *each*

Puch cylinder stud for the Cobra and Monza models. The bottoms are M8 thread and the top is m7 threading.      *Sold each*Please be sure to compare before purchasing Thread Diameter: 7mm x 1mm and 8mm x 1.25mm Part...

Amal 17mm Cable Choke Carburetor - Extended Adjustment Knobs

17mm Amal cable choke carburetor. These are high quality Spanish carburetors with more tuning options than a Dellorto SHA. Comes with 23.6mm shim. No shim = 26mm#60 main jet.  Recommended Accessories:Amal Carburetor Jets

Tomos A3 Airsal 44mm 70cc Moped Cylinder Kit - 10mm Wrist pin

Airsal 44mm 70cc cylinder kit with 10mm wrist pin for your A3 powered Tomos. Finally an easy solution for A3 performance. This kit includes the cylinder, piston, rings, wrist pin, clips, gaskets, exhaust studs, reed block, and reeds...

Honda Hobbit / Universal Moped Cylinder Stud m6 x 120mm *each*

Cylinder stud for Honda Hobbit mopeds.  Sold each. Please compare yours before ordering. M6 Threads x 120mm Long *Use maximum 5ft lbs of torque*  

NOS Puch Magnum Moped Center Kickstand - Black

Original Puch Magnum XK, MKII and Freespirit KickstandThis is longer than the maxi versions.  Puch # 322.1.24.300.2/30

NOS Puch Maxi Moped Center Kickstand - Black

Original Puch Maxi Kickstand. Meant only for E50 models.  Puch # 349.5.24.500.2/30

Vespa Ciao Performance Exhaust by Jamarcol

Aluminum Proma style performance exhaust for your Vespa Ciao, Citta, and Gilera. Made in Portugal by Jamarcol. AKA Jammy.*Black exhaust, the paint will not be perfect and will fade /burn off with time.

NOS Motobecane AV7 Flywheel Cover with Rubber Tabs - Silver

 Motobecane AV7 flywheel cover, keeps moisture and dirt out. Novi-ignition-style mopeds.About 124mm ID Straps included. Accessories:Extra cover straps

Union Moped Pedal Set 9/16 " - Universal Fitment

Union brand Moped Pedals. High quality retro pedals like the one found on original Puch Magnums The real deal!  9/16th threads fit 99% of mopeds.     

Motobecane Non Variating Drive Belt - 14.5 x 8 x 772 LI

Motobecane toothed drive belt for Non variating Motobecane engines... 6024 14.5 X 8 X 772 LI belt.