Motobecane

Motobecane AV10 Complete Engine

 European AV10 50cc Motobecane engine. Reed valve and 12v CDI technology. Powerful and reliable high quality clone. Roller crank, CDI and Reeds makes it a great upgrade over your stock AV7 engine.Comes with everything shown.  Your will need...

NOS Huret Motobecane Speedometer - 35 MPH

NOS Motobecane Huret speedometer found on many Motobecane and Mobylette Mopeds.  Will work with other Huret cables and speedo drives found on various mopeds as well.35 MPH10mm threading.2.5mm inner cable end.

NOS Motobecane Huret Speedometer Drive

NOS Motobecane Huret speedometer drive found on many Motobecane and Mobylette Mopeds.  Will work with other Huret speedometers, cables found on various mopeds as well.  10mm Threading.2.6mm inner cable end.

NOS Motobecane Pulley with gear

Original Motobecane pulley for Motobecane and Mobylette mopeds. Comes with front sprocket.

NOS Motobecane 7 Moped Left Side Floor Board

NOS Motobecane 7 floor board for the left side.  White in color with a little color fade from being 40 years old. A little dusty from storage.

NOS Motobecane 40V 40T Side Panel Decal Set

NOS stickers for the side covers of the Motobecane 40V and 40T mopeds. Comes with left and right.

KMC White Pedal Chain for Mopeds

KMC Moped pedal chain. (white/black)98 Links.Works great on all mopeds that need a pedal chain. 

Gold 415 x 130 Moped Drive Chain - Heavy Duty

415HD Moped Drive chain for most mopeds.  Great quality and dependability. AKA Heavy Duty.  Gold color for custom clean look 415 type x 130 linksIncludes Clip Style Master Link. You will most likely have to remove links depending on your...

Motobecane Locking Gas Cap, 30mm

Fits all post 1976 standard Motobecane / Mobylette Mopeds models, except the 7 and AV88.  Comes with dip stick. Much better than using your lighter to see how much gas you have left. 30mm diameter

CEV speedometer dash with keyed ignition

 Atttaches to your handlebars, and provides a spot to put your Speedometer, and includes a handy kill switch or can be used as a theft deterent.   It came standard on many mopeds and will work with most.

EBC 80mm Brake Shoes PA50 / Puch / Motobecane / Peugeot

EBC 80mm quality brake shoes.  80mm x 18mm Fits: Rear only: 1978-1979 Honda PA50I HobbitRear only: 1978 - 1982 Honda PA50II HobbitF & R: 1977-1979 JC Penney Pinto, Pinto 2, Swinger, Swinger 2(Spoke wheels)   Also its on Puch...

Motobecane, Mobylette Complete Gasket Kit for AV7 Engines

Complete gasket kit for Motobecane AV7 engines.  The same engine found on the Mobylette, Murray, AV88, 50v, 51v and many more.   Comes with everything shown.

Motobecane Mobylette 39mm Stock 50cc Piston Kit - AV7, AV10 Engines

Perfect replacement for your worn or damaged piston from in Motobecane AV7 or AV10 engines.  The same engine found on the Mobylette, Murray, AV88, 50v, 51v and many more.   Comes with everything shown. Diameter: 39mm Stroke...

CEV 5" Round Metal Moped Headlight *Flat Black*

New Old Stock Puch Headlight Bucket.   Comes with a single filament 6v bulb.  Fits most mopeds and is 5" wide mount to mount.Top qualtiy steel and glass.  Made in Italy! FLAT BLACK CEV 2143 Recommended Accessories : 12volt...

5" Round Black and Chrome Headlight

5" round head for many mopeds. Such as the Puch Maxi, Magnum, Tomos, Garelli and loads more.  Does not come with bulb, but does come with mounting hardware and a ground wire.  Takes BAX15D or BAY15D Style bulbs found in our store.  Pick...

415 x 90L Drive Chain

Great replacement chain for Tomos mopeds as well as others with the same size..  Standard Tomos A3 A35 chain is 90 L as well.  Comes with masterlink.  Chain size varies depending on gearing, make and model.  Please check...

Universal Chrome Moped Pedal Arms *Pair* 125mm

Top quality universal chrome pedal crank arms.  Works on almost all mopeds, and clears most performance exhausts.  Great on Puch Magnums, Hondas, Tomos, Sachs, Motobecane, Peugeot.  Pretty much everything with 16mm sized cranks.  Fit...

Kenda "Universal" Inner Tube 2.00, 2.25, 2.50 x 16" & 17" Tires

Universal moped inner tube for 16" and 17" wheels.  That is right.  One tube to rule them all. Perfect fit for all mopeds with 16" or 17" tires from 2.00 up to 2.5 wide. 2.00/2.25/2.50-16/17 TR-4

12mm Piston Circlips, *sold in pairs*

Single opend ended circlip for use with stock or performance kits. Puch, Tomos, Vespa, Puegeot, Garelli, Derbi, Minarelli, Morini , and many more.   *Sold in Pairs*

Brake Cable Knarp 7mm x 9mm

Brake cable knarp /cable stop for many moped applications. 7mm x 9mm

Mini Cable Knarp 5mm x 7mm

Cable knar for many uses on mopeds, motorcycles and scooters.    Dimensions: 5mm diameter  x 7mm long

Chrome Classic Moped Handlebars

Description: Super rad stock like classic bars. Chrome and shiny. Diameter 7/8th"  Width:25.25" Rise 9.5" Pullback 2.75" Center Mount Widt: 3.25"

280mm MKX Chrome Moped Shocks

Replacement pair of 280mm Chrome on Chrome adjustable shocks for many mopeds and smaller motorcycles   Measure from eye to eye and compare. Stiffen or loosen up your rear end with the pre-load adjustment and stop bouncing down the road. Fits most...

280mm MKX Black Moped Shocks

Replacement pair of 280mm Black on Chrome adjustable shocks for many mopeds and smaller motorcycles.   Measure from eye to eye and compare. Stiffen or loosen up your rear end with the pre-load adjustment and stop bouncing down the road.Fits...

Dellorto 16.16 SHA Carburetor, Lever Choke

Great upgrade for Tomos, Garelli and Peugeot mopeds. Pairs well with 70cc kits as well. Internal mounting diameter is 19mm. You will need a smaller 18mm shim to fit on Tomos intakes.

5" Headlight Grill. BLACK, Puch Maxi, Tomos Mopeds

Black Head Grill for 5" headlight. Works on all other round headlight we sell and fits anything with 5" wide mounting bolt area. Will not fit on the CEV bullet style headlights.

Tomos Side Kickstand For Round Swingarms *9" Black*

Sometimes a performance pipe forces you to do something else for a kickstand Here is the solution. Here is a high quality side kickstand in Black, and easy to install. All mounting hardware included. This kickstand is intended for bikes with tube style...

Universal Throttle / Choke / Decomp Cable - 78"

Great universal cable that can be used on Throttles, Chokes, and decompression levers. Depending on your moped, you may need to pick up a knarp to fit on one end. Dimensions:Housing 69.5"Inner Cable 78" Long Tech Tip:  To shorten; remove the inner...

Universal LED Clear Moped Tail light

Deluxe LED taillight. Designed for Puch and Tomos Mopeds, but can be used on anything with a 12v system. Green=ground Yellow= running light Blue= brake light

NGK Spark Plug Cap for threaded terminals LB05F

LB05F 5k Resistor cover / cap.   For stud type spark plugs. Most nuts are removable on the spark plugs.will fit 5mm plug wires.  Perfect for Motobecane and  Peugeot. NGK 8501    

NGK Spark Plug Cap for Mopeds LB05E

LB05EP 5k Resistor cover used on most mopeds and scooters. For spark plugs with terminal nuts. **No logo white logo... Now black debossed "NGK" initials. 

60mm Chrome Metal Mesh Air Filter, fits SHA Style Carburetors

Metal Mesh, K & N style Hi Flow air filter for the SHA 10- 16.16 carburetors. Perfect for Tomos, Garelli and other mopeds that use this type of carburetor.OD 74mmID 60mm length 81mm 

Motobecane AV7 74cc Airsal Cylinder Kit

Motobecane AV7 Kit, 47mm. . Made by AIRSAL a Spanish performance parts company. High quality cast aluminum cylinder kit!! This kit is for all American style Motobecane mopeds with the AV7 engine and also works with AV88 Euro style engines.  Kit...

Motobecane 12v CDI unit for AV7, AV10, AV88 - Includes CDI box.

Works on everything Motobecane: AV10, AV7, and AV88. CDI is the modern stuff that all new bikes run with. This is the CDI that comes on the new MBK AV10 type engines.Includes everything you shown.  View photos for wiring diagram...

Aluminum Clip-on Handlebars for Mopeds and Motorcycles, 28mm or 32mm

Adjustable clip-on handlebars.  Made out of Billet Aluminum. Includes 2 different spacer blocks, so you can adjust the height to your liking. Low Pro, or high. These handlebars work great on EBR forks, but will clamp  to any 28mm fork tube...

Motobecane AV7, AV88 Stock 39mm Piston Ring Set, GI

Motobecane AV7, AV88 stock piston ring 39mm x 2.00mm,  GI Type  Also works with the Airsal Motobecane 50cc Cylinder Kit Made by Airsal Spain.

Moped / Motorcycle Side Mount License Plate Holder

Universal, this goes either on the left hand, or right hand side.ï¿_ You can install it on your shock bolt, or your axle. Puts your plate where the man can see it.   Made in the USA.

NGK B5HS Spark Plug

NGK B5HS Spark Plug. Sold Each   Used for many mopeds, like the Tomos, Motobecane and Puch

NGK B7HS Spark Plug

NGK Spark Plug B7HS. Sold EachWorks on mopeds like Honda, Tomos, Motobecane Puch, Sachs, and many more.

NGK B6HS Spark Plug

NGK Spark Plug B6HS. Sold EachWorks on mopeds like Honda, Tomos, Motobecane Puch, Sachs, and many more.   Tech Tips: Tighten terminal nut before use. Remove terminal nut for stud type spark plug caps NGK Heat rating of 6 is perfect for stock...