Biturbo exhaust expansion chamber and baffle. Use for custom projects where performance exhausts are hard to find.
28mm I.D. for the expansion chamber..
Right hand side mounting.
Recommended AccessoriesBrass tall nuts
Baffle end cap, spring and clip for all biturbo Exhaust silencers.
Chrome plated Biturbo silencer baffle. You'll have to cut out your old one and weld this in place.
Tomos A3 A35 exhaust support bracket. Black
This was an original item on some Tomos A3 and A35 mopeds. You can use this as an adapter or for anything you see fit.
40mm eye to eye
roughly 51mm top to bottom.
This gasket is used on Minarelli, Derbi, Puch, Tomos, Garelli, and Morini mopeds. This is an upgrade to the stock 20 or 23mm gasket.
43mm center hole to center hole.
Tomos # 203862
Tomos A3 / A35 chrome header. 28mm Outer Diameter.
For use with 2 part exhausts or for custom applications.
*Will fit the Puch MV
28mm outer diameter.
25mm Inner diameter at end.
23mm inner diameter at flange.
42.5mm center to...
Tomos A3 / A35 chrome header. 25mm Outer Diameter.
For use with 2 part exhaust or for custom applications.
25mm outer diameter.
23mm Inner diameter.
Style: Brass Tall Exhaust Nut
Size: M6 x 18mm tall
Description:Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.
*SOlD EACH* Buy 2!
Everything you need to install your Tomos, Puch or similar exhaust, easily and correctly.
This kit includes:
Tall M6 x 10mm bass exhaust nuts are perfect for performance upgrades...
Style: Extra Tall Brass Exhaust Nut
Size: M6 threads x 25mm long
Description:Perfect for installing a performance exhaust, because they are taller and give you room to tighten with larger headers.
Black finish Tecno Boss exhaust for the Tomos mopeds with the A3 and A35 engine. Will not fit the Revival or Streetmate.
28mm Internal diameter header allows for a higher top speed. Expect 5-10 mph gain over stock. Re-gear for...
Hand made dutch quality Tomos A3 / A35 exhaust by Homoet.
Great midrange and topend pipe. If you are looking for the best performance exhaust for your Tomos, this is the pipe you need.
Fits A3 and A35 engine LX, Targa LX, ST, Bullet,...
Tecno Bullet exhaust for your Tomos A3 and A35 mopeds. Natural expansion chamber with chrome silencer. Large header, and a big exhaust port help make this pipe a great all around performance exhaust. The expansion chamber on this pipe gives your basic...
This setup is typically used with Tomos A3, A35 or A55 mopeds when using a Puch Maxi cylinder kits. Also works on many custom projects where performance exhausts are hard to find. 28mm I.D. for the expansion chamber.. Right hand...
Budget Tecnigas style. The go to exhaust for increased performance over the Biturbo, but all around quiet exhaust to keep the neighbors and police off your back. Retains low end, but midrange and top end are increased much more than the...
These 6mm engine studs are for almost all cylinders and kits, and can be used for exhaust and intake.
6mm x 30mm