Stock CDI Ignition stator assembly for Honda MB / MT 50, will work on 50-80cc. Be sure to check timing.
2 teal1 white1 blue1 black1 yellow
Recommended Accessories:MB5 Store Results
NOS CEV flywheel assembly. For Minarelli V1 powered mopeds in the 1970s.Includes Stator plate, Internal spark coil, Light Coil, Condenser, Points, and Magneto rotor.
clockwise, M19x1 puller, M10x1.25 nut, M3.0 key
Works on everything Motobecane: AV10, AV7, AV88, 50V, and 51V.
Includes:Stator plate with coilsMagneto RotorCDI BoxExternal Ignition coil with Boot and 14" cableRecommended accessories:Flywheel cover Puller toolsSpark Plugs (6, 7 or 8...
New original Kinetic moped CDI magneto rotor aka flywheel. This is the no window version. Can be used on Vespa points cases if using Kinetic coils, magneto rotor, and CDI box. NOT for Vespa CDI cases.
Kinetic Part # 19022100 &...
Original Kinetic moped ignition magneto cam follower.
Kinetic # 03023010
Recommended Accessories:New Magneto Rotor
New original Kinetic moped CDI magneto rotor aka flywheel. Can be used on Vespa points cases if using Kinetic coils, magneto rotor, and CDI box. NOT for Vespa CDI cases.
Kinetic Part # 19022100Made in India
Dimensions:Inner Diameter - 99...
Nos 12V 40W stator plate for Avanti mopeds like the Mont, Super Sport, Kobra, Auto-power, and cosmo stinger. Terminal connectors on Brown White Red wires.Open wire end for Yellow & Pink.Part # 25 1 43 200
Use this on 12v CDI and Points ignitions to prevent blowing out of light bulbs from voltage surges.
Connect white wire in between (parallel) with ignition power output wire and ground the black wire.