Our New Old Stock section is for that which we have found in our travels and searches for moped part sourcing greatness. There may never be a restock on the items seen here. Feel free to ask questions about these products HERE.
Quality KBC half-sealed wheel bearing for various moped wheels. Known to fit the left side of Motobecane rear wheels (6000 bearing for right) and is both sides for Peugeot rear wheels.Please be sure to measure and compare before purchasing.
New Old Stock CEV wiring harness for Foxi mopeds and the KTM Hobby. These specifically are from the European sold KTM Hobby, but can be mated to work with the U.S. sold Foxi Deluxe, Baron, and classy Salzburg or another custom built ride...
NOS CEV speedometer drive.
Super rare NOS original CEV rectangle / Euro style headlight. This version was normally found on Puch Maxi / Newport, Solo, Moto Guzzi, Benelli, Zundapps and Hercules mopeds. Can be used with many other mopeds...
NOS Gurtner D8.8 and D12 carburetor float for Peugeot 102, 103, BB and Motobecane M11 models.
Needle length = 37.8, Bowl diameter = 22.0, Bulb length = 20.1
Gurtner # 6437
Tomos OEM A35 A55 center case gasket
Tail light lens for CEV 19845 Tail light base or aftermarket version
Use this on Tomos, Puch, and many other mopeds. Even motorcycles like the Ducati pantah 500 & 600.
84mm wide x 100mm tall x...
Original Tomos A3 moped internal coil
Used for your old points ignition system.
Tomos Part # 221735
Made in Italy
New old stock 12mm wrist pin.
12mm Diameter x 30.9mm Long
This is good on Puch and Tomos 12mm con rods. Please measure and be sure you need this.
*Might need a polish from years in a bag on the self but, no pitting, no scrapes, no issues...
Sweet Vintage NOS Ariete grip Sets for moped and mini motorcycle handlebars.
For 7/8" or 22mm handlebars
4.6 inches long
*Sold as a pair *
12v horn. Will work with any moped / motorcycle with 12v system.
Comes with a nice sturdy mounting bracket which can be removed if needed.
The original P60-MT carburetor used on many on the Avanti mopeds such as the Super Sport and Kobra. Uses 60mm air filters.Made in India by Pacco Dimensions:Intake with shim ID 21mm
Intake with no shim ID 24.6mm
Original Avanti moped rear brake pads with springs. Include 105mm x 25mm pads. *Please be sure to compare before purchasing.
NOS original Avanti moped Rear Brake Plate with pads and lever assembly. Include 105mm x 25mm pads. These may have shelf wear. Cool Grey.Avanti # 2.545.1300
Originally for Motobecane mopeds. Almost all cable adjusters are 6mm so it is most universal.
Original NOS CEV brand replacement points for CEV ignitions found on some Tomos A3, Minarelli and Morini mopeds. Please compare before yours buying. DOES NOT FIT THE TOMOS A35
Works with CEV 6420 Stator Ignition System and possibly...