78 results for pull

Motobecane Moped Aluminum Pulley with 11 Tooth Gear

Polished aluminum  pulley for Motobecane and Mobylette mopeds.Comes with 11 tooth sprocket. Only Peugeot sprockets will fit this pulley if a replacement is needed. Fits 16mm Pedal shafts. Sprocket...

Kinetic Original One Speed Clutch Pulley Spacer 12 x 16 x 30

  Kinetic original one speed clutch pulley spacer / bushing / ring. Will fit Vespa Piaggio moped as well. Kinetic #03054040 Dimensions:12mm ID16mm OD30mm Long Recommended Accessories:

Buzzetti Clutch Puller for Puch E50, Morini, Minarelli

High Quality clutch puller for Puch Maxi, Newport, Swinger, Pinto, Freespirit, Bombardier and other models that use the E50 engine.  As well as minarelli and morini  Also a Flywheel puller for...

Vespa Piaggio Si 9.5 x 1140/50 V Belt for 105mm Pulley

Replacement "V" drive belt for Vespa Piaggio Si mopeds with 105mm pulleys. Dimensions:9.5mm wide1140/50mm Long

Original Kinetic Drive Pulley Washer, Universal 12ID X 20OD X 1

Original Kinetic washer/ Spacer/ Shim for drive pulley.  Can be used universally.Dimensions: 12ID X 20OD X 1

Motobecane Stock Pulley with 11 Tooth Gear and Pedal Engagement Lever - Black

Motobecane pulley for Motobecane and Mobylette mopeds. Comes with 11 tooth sprocket and the pedal engagement lever. 

CEV/Ducati flywheel magneto puller - Motobecane, Minarelli and Garelli Mopeds

NOS Flywheel / Magneto puller fits CEV/Ducati  19mm x 1mm Right hand thread. Good to use on Motobecane, Garelli, and Minarelli.   CEV 6932 CEV 6933 CEV 6939 CEV 6952

Peugeot Pulley with 11 Tooth Sprocket + Pedal Switch, INA bearings - Black Plastic

Replacement stock style pulley for Peugeot 103 mopeds. Includes INA brand Caged bearing.

OEM Kinetic 85mm Rear Drive Pulley for Non-Variated Mopeds - TFR

New original 85mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. If you have the 95mm then this will give you more top speed. This is the smooth round 11mm hole with a...

Bosch / Motoplat/ Ductati Flywheel Puller, Tomos, Puch, Sachs, Kreidler, Zundapp

Flywheel puller for bosch flywheels - puch, kreidler, zundapp & tomos a3, tomos a35 (w/ iskra cdi), solo, and derbi mopeds. works on most sachs flywheels, but not all, so check to be sure first (does...

Original Kinetic NON - Variated Transmission Gear Box (no pulley or brake shoe included)

New original Kinetic moped NON - variating gear box. Made for NON - variating models such as the TFR, TFR USA. Luna, etc.Key differences between a variating and non variating:

Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated

Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 

Vespa Piaggio Ciao 13mm x 950mm Ribbed Drive Belt for 80mm Pulley - Variated Only

Ventico 13mm x 950mm drive belt for Variated Vespa Piaggio Ciao mopeds. For use on 80mm Pulleys. 

TC Bros Window Chopper 7/8" Handlebar - Black

TC Bros Widow Chopper Handlebars.  Black 7/8" steel bars for motorcycles, mopeds and even customer bicycles. Tig welded for ultimate strength and finish. Classic Widow style, but with a slight pull...

Dellorto PHBG Carburetor Cable Choke Assembly

Swap your pull choke on your PHBG carburetor for this assembly to use a cable choke.   Fits all Dellorto PHBG carburetors.  Clones may vary. Dellorto # 53002-78

Classic Chrome Moped Chopper Handlebar - MID

Classic Chopper, moped sized  handlebars. Mid height.  Not ape hangers. Dimensions: 7/8" DiamterRoughly 12.5" tall5" Pull Back26" wide  

NOS Piaggio SI Handlebars - Chrome

Original NOS Piaggio SI handlebars.  Ccould be used on all others that take a normal 7/8" type bars.  " Wide " Rise  " Pull Back   Made in Italy by Piaggio

Avanti / Kinetic Original Handlebars - Chrome

Original Avanti and Kinetic 7/8" moped handlebars, in chrome. Specs:25-29" End to end width3.5" Center mounting width3.5"Pull back7" Rise

Cuppini Piaggio Bravo Handlebars - Chrome

Top quality replacement handlebars for your Piaggio Bravo Mopeds.  Can be used on all others that take a normal 7/8" type bars.  24" Wide 10" Rise  5" Pull Back   Made in Italy by Cuppini

Puch Moped Clutch / Starter Cable *Teflon Coated*

This is the clutch / starter cable for all E50 engine based mopeds.  Maxi, Newport, Swinger, Pinto, Freespirit, Murray, Bombardier and others. Teflon coated for long lasting smooth pulling...

Universal Clutch/Starter Cable , Teflon Coated - ZA50

This is the clutch / starter cable for many different mopeds. Teflon coated for long lasting smooth pulling.  Dimensions:Housing: 70.8" longInner cable: 78.8" long*Does not have adjuster but can...

Front Brake Cable for Vespa, Piaggio, Kinetic Mopeds *Teflon Coated*

Front Brake Cable for Vespa Ciao, but typically fits other Vespa, Piaggio, Kindetic mopeds like the Bravo, Boxer, Ciao, Grillo, Grande, SI Kinetic TFR  and similar.   Teflone coated for easy pull...

NOS Domino Brake Light Switch

NOS Domino Brake light switch. Also workds with Magura. This switch will turn your brake lights on when you pull your brake lever. Just the way we want it to.  Will fit all 2008 and up mopeds that...

Omega Motobecane AV10 Case Assembly, Case, Bearings, Studs, Gaskets

Motobecane AV10 engine case assembly by Omega! Performance case, Huge transfers, you need a performance cylinder kit. Includes:CaseIntake manifold (PHBG type)BearingsStuds Gaskets*No Case...

Piaggio Ciao Rear Brake Cable *Teflon Coated*

Rear Brake Cable for Vespa Ciao, but may fit other Vespa, Piaggio, mopeds.  To short for Bravo, Grande and TFR.  Please measure your old one and compare first before buying 65" Total Length 45"...

Throttle Cable, Tomos A35 Mopeds *Teflon Coated*

Replacement throttle cable for Tomos  A35 mopeds Mopeds.  (This cable is a bit universal, it will fit on other mopeds like the A3 as well with a cable knarp) Teflon coated for easy pull and smoother...

Puch Moped Rear Brake Cable *Teflon Coated*

Rear cable for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier etc. Will also fit the Honda Hobbit PA50 and maybe others when used with a knarp.

Front Brake Cable, Tomos A3 A35 Mopeds, ZA50 Starter - Teflon Coated

Replacement front brake cable for Tomos A3 and A35 mopeds Mopeds.  (This cable is a bit universal, it will fit on the Garelli, Motobecane, and others for certain)Teflon coated for easy pull and...

Throttle Cable for Vespa, Piaggio, Kinetic Mopeds * Teflon Coated

Throttle Cable for Vespa Ciao, but typically fits other Vespa, Piaggio, Kindetic mopeds.  Teflon coated for easy pull and smoother operation.  No lubrication needed! cable inner - 1.5mmcable housing...

NOS Tomos A35 Moped Brake Light Switch

NOS original Tomos Brake light switch. This switch will turn your brake lights on when you pull your brake lever. Just the way we want it to.  OEM replacement for A35 Bullet, Colibri, Targa, LX,...

PHBG 21mm DS Black Racing Carburetor - CLONE

Quality clone of the Dellorto PHBG Racing Edition Carburetor.  The most noticeable feature of this 21mm carb is its black color. The metal float bowl is equipped with a central screw that allows...

PHBG 19mm DS Black Racing Carburetor - CLONE

Nice quality clone of the Dellorto PHBG Racing Edition

PHBG 21mm BS Carburetor, Cable Choke - CLONE

Clone spigot mount PHBG 21mm BS cable choke carb. This style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than a clamp style carb that doesn't...

Dellorto 19mm PHBG DS Carburetor Racing Edition

PHBG 17.5mm DS Black Racing Carburetor - CLONE

Quality clone of the Dellorto PHBG Racing Edition Carburetor.  The most noticeable feature of this 17.5mm carb is its black color. The metal float bowl is equipped with a central screw that allows...

Dellorto 21mm PHBG DS Carburetor Racing Edition

PHBG 19mm DS Red Racing Carburetor - CLONE

Nice quality clone of the Dellorto PHBG Racing Edition Carburetor.  The most noticeable feature of the 19mm carb (type PHBG) is its bright red color. The metal float bowl is equipped with a central...

2SP Tomos A35 CNC KTM 3 Shoe Clutch

Fitment on a A55 appear to have clearance issues.  We are currently investigating further. Two Stroke Performance high strength and  adjustable KTM  3 shoe clutch for Tomos A35 powered mopeds.   The...