128 results for 20mm shock

Original Tomos Complete Front Brake Assembly for Grimeca Mag rims

NOS brake hub assembly for 1996 and up Tomos A35 mopeds. Brake pads included are 105mm x 20mm. Fits Gimeca mag rims   Tomos # 233124

Puch Stock Air Filter Box - Korado / Z-ONE

Replacement air intake filter box for Puch Korado / Z-ONE mopeds with stock Bing carburetors.Fits 20mm Bing with included bushing or fits 28mm with no bushing.

Motobecane Rubber Bushing for Lower Motor Mount Engine Spring Bracket

Replacement lower engine spring motor mount bracket bushing. Dimensions:20mm OD16mm Width6mm bolt hole Recommended Accessories:

Taller Brass Intake / Exhaust Nut M6 x 18mm (SOLD EACH)

Brass Tall Exhaust Nut.Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.    M6 x 18mm tall20mm Hex

NOS Tomos Black M7 Cable Adjuster

NOS slotted cable adjuster for Domino / Tomos and others with 7mm thread type. Came Originally on the Tomos Flexer(UK model) Total Length = 30.5mm Thread length = 20mm   Tomos # 234514  

Kinetic Original Curved Spring Crank Washer - Behind Magneto

Kinetic original curved spring crank washer. This goes on the crank right behind the magneto. Will fit vespa piaggio mopeds as well. Keyed. Dimensions:0.2mm Thickness20mm OD Kinetic # 03144030

Motobecane Tank Badge / Emblem - Black

Sweet replacement tank badge / emblem for your Motobecane moped. You will receive one unless your order two. Now in Black Dimensions:

NOS Tomos Dashboard / Speedometer Holder

NOS dashboard / speedometer holder for Tomos mopeds like the bullet, Colibri, LX, TT, Sprint, and Targa.   Speedom hole:  60mm &n

Universal Choke / Decompression / Starter Plastic Lever *Matte Black*

Lever for cable choke or decompression on mopeds like Motobecane, Puch, Peugeot, Honda PA50 and many more. For bars from 20mm to 24mm (any 7/8" Bar) Recomended accessories:      Universal cable  

21mm - 24mm Intake for Bolt on Mikuni Carburetor, MB5, NS-1 NSR50

Intake for bolt on 20mm-24mm Mikuni VM style carburetors. Oil injection or boost bootle inlet on side. Can be capped off if not need.  24mm IDFits: MB5, NSR50, NS-1 and similar engines.

Tomos Halogen Headlight Bulb 12v 35/35 BA20D

12 volt 35 watt Halogen BA20D bulb for many Tomos models and other mopeds.   12v 35/35w   Please compare yours before purchasing. 20mm base *Most likely will not fit A3 tomos mopeds.

NOS Tomos Moped A55 Cylinder Stud m7 x 115mm *each*

Original NOS Tomos Cylinder stud for A55 Engines.  Sold each. Diameter: 7mm   M7

28mm UNI Black Foam Air Filter for Puch Bing Carburetors

High flow clamp on foam filter with flex core inner spring allows the filter to fit in confined areas and hold its shape for longer life.   Our go to filter for best performance. Will work on 20mm...

UNIVERSAL CHOKE / DECOMPRESSION / STARTER METAL LEVER *GLOSS BLACK*

Original Tomos Spark Plug Cap / Boot

NOS Tomos spark plug boot / cap Used on threaded spark plug tops. Use a pair of pliers to unscrew the terminal cap on you spark plug. Non - resisted type.  35mm L x 20mm W   Recommended...

Biturbo Exhaust Silencer Baffle Replaement / Stinger - Chrome

Chrome plated Biturbo silencer baffle. You'll have to cut out your old one and weld this in place. Dimensions:18mm ID rear19mm ID tip20mm OD rear23mm OD at weld 22mm OD at tip266.7mm (10.5") Length

3/16-1/4" Fuel Filter, Compact Clear Body - Fine Mesh Screen

Compact 3/16-1/4"  fuel filter for tight places. Fine metal mesh filter screen. Great protection from old tanks.  Make sure to pick up some fresh 

NOS Vespa Piaggio Condenser w/ Wire

NOS Vespa Piaggio Condenser with wire lead. Dust will wipe right off.Made in Milan by Mical *Compare before purchasing

Original Kinetic TFR USA Pedal Crank - 16mm OD

Kinetic TFR USA Crank spindle with sprocket. This is the smaller 16mm OD version.*Does not fit TFR or Magnum model with 20mm crank.*Dimensions:16mm OD spindle

Universal Moped Foot Pegs -16mm

Quality made foot pegs.  Remove your pedal arms for exhaust clearance or give your ped a motorcycle feel.Fits 16mm opening of pedal crank and is secured with Allen set screw.  Pretty much fits all...

Honda MB5 Complete Engine Oil Seal Kit

Replacement seal kit for Honda MB50 and MT50.Included Seals:56mm x 28mm x 8mm

Puch Pinto Intake Manifold, 15Id/20 OD - Round Port

Replacement Puch Pinto/X30 Round Port intake manifold. Dimensions:20mm OD<

12V 25W/25W BA20D Light Bulb

12V 25/25W BA20d bulb. The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles. *Please compare yours before purchasing.Dimensions:Dome - 35mm Diameter x 42mm...

Puch 15mm Intake for Bing Carburetors - Square Port

Square port 15mm intake for Puch Maxi, Newport, Magnum and similar mopeds Puch based engines.Works with stock carburetor or 15mm for increased air flow.Dimensions:1

Sachs Athena 15mm Curved Intake

Flat mount intake works perfectly with  Bing carburetor.  A SHA or Amal can be used with some custom shimming. Used on Sachs 504, 505  A and B cylinders that have the angled intake port along with...

Vespa Piaggio Ciao Center Kickstand Return Spring Set

Replacement Vespa  center stand spring set. This is for Ciao models from 1971 to 2004.   Perhaps some other Piaggio model mopeds as well. You will need to compare first. You get (2) springs for a...

Puch 15mm Intake for Bing Carburetors - Polished

15mm intake for Puch Maxi, Newport, Magnum and similar mopeds Puch based engines.Works with stock carburetor or 15mm for increased air flow.Square port* Polished for better air flow

6mm Fuel Filter, Compact Clear Body

Compact  fuel filter for tight places and smiling faces.. Fine metal mesh meida filter like Visu Filters. Great protection from old tanks. Will work well with 6mm and 1/4" fuel line

Honda MBX, MTX, NSR Complete Engine Oil Seal Kit

Replacement seal kit for Honda MBX, MTX, and NSR models from 50 to 80cc.*Must measure and compare before purchasing.  Included Seals:

Sachs 90 Degree Intake Manifold, 504/505 - Angled Mount

DMP replacement Angled mount intake works perfectly with  Bing carburetor.  A SHA or Amal can be used with some custom shimming.Used on Sachs 504, 505  A and B cylinders that have the flat intake...

Mikuni VM22 Carburetor

High quality Japanese carburetor for the Honda MB5, NSR50 and NS-1 with 70cc kits installed.  Will work with stock 50cc cylinders, but low end will be sacrificed for top speed. 20mm intake needed...

Original Kinetic Moped Pedal Crank Spindle Bushing - Each

OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the  16mm TFR USA type. You need one for each side of the pedal crank...

6V 35W/35W BA20D Light Bulb

High quality Bollard or CIF brand 6V 35/35W BA20d bulb. The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles such as Vespa Piaggio and Tomos. *Please compare...

Vespa Piaggio Front Wheel Sealed Bearing Conversion Kit - Spoked and 14 Spoke Mags

Sealed bearing conversion kit for Vespa Piaggio Bravo, Ciao and Si mopeds with Spoked wheel, 4 star or 14 Spoke Mags**Must use an 11mm axle, check before purchasing.Includes:2x 6002 sealed bearings1x...

NOS CEV 6V 25W/25W BA20D Light Bulb

Original CEV brand that has traveled through time.  The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles.  This bulb is 6V 25W/25W. Amber low beam, White high...

Puch E50 Engine Hardware Set

Hardware set for your Puch E50 powered mopeds like the Maxi, etc. Zinc plating for rust resistance. Package includes: 

6V 25W/25W BA20D Light Bulb

6V 25/25W BA20d bulb. The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles such as Vespa Piaggio and Tomos. OEM part # 044701 for A55 lx, st, and sprint, as...

Chrome Moped Pedal Arms Set, Puch Style- 180mm

Universal chrome pedal crank arm set. Perfect fit on Puch, Maxi  Magnun, Motobecane and many others.Fits nearly everything with 16mm sized cranks, But notice the length. 

NOS Chrome Moped Pedal Arm Left Side, 160mm - Per Piece

Universal chrome pedal crank arm. Great for Vespa replacements. Left Side* Works on almost all mopeds, will clear smaller performance exhausts.  Great on Puch Magnum, Honda, Tomos, Sachs, Motobecane,...

NOS Chrome Moped Pedal Arm Right Side, 160mm - Per Piece

Universal chrome pedal crank arm. Great for Vespa replacements.  Right Side* Works on almost all mopeds, will clear smaller performance exhausts.  Great on Puch Magnum, Honda, Tomos, Sachs,...