192 results for nut

Fly T-Handle Tool Set

·        Fly Racing T Handle Set, great for general maintenance or carry with you for road side emergency repairs...

Original Tomos A35 Turn Signal - Long Arm

New original Tomos turn signal with long arm. Can used for either left or right side. Will fit multiple mopeds and was used on the A35 Targa, TT, LX, and Classic from 1992-1999...

Puch Proma GP Performance Exhaust *Clear Coat*

Long discontinued, but we found some....  Lucky, lucky.   Tecnigas quality for Puch mopeds like the Maxi, Newport, Swinger, Dart, Pinto and similar.  Fits on Magnum as well when...

Universal Turn Signal - Tomos, Kinetic , Peugeot *Per piece*

Replacement turn signals. Perfect for Tomos, Kinetic and some Peugeot mopeds.  Will fit many other mopeds as well.  Wiring terminal connector modification may be necessary.Same as the...

Tomos A3 A35 Tecnigas Next R Exhaust, Natural Finish

Excellent construction and amazing performance. Natural lacquer finish for that race replica look. Fits Tomos mopeds with the A3 and A35 engines.  Fitment is best with a side kickstand...

Digital Caliper / Micrometer Measuring Tool - Plastic

Plastic digital measuring caliper tool aka Micrometer.Battery includedNo storage case. Opens to 150mm. This is perfect for answering many many questions regarding the sizes on nuts, bolts,...

Universal Exhaust Baffle 22mm ID, Sachs/Morini - Black

Universal exhaust baffle. Sachs stock style. Works great on Morini mopeds as well. Clamp it on with a 28mm header available for Puch, Tomos and Sachs. Can be clamped or welded it to your...

Original Kinetic Magneto Rotor / Flywheel - 19022100

New original Kinetic moped CDI magneto rotor aka flywheel. Can be used on Vespa points cases if using Kinetic coils, magneto rotor, and CDI box. NOT for Vespa CDI cases.  Kinetic Part...

Puch Maxi Chopper / Slash Exhaust- Black

Puch Maxi chopper style side exit exhaust pipe. Left side mount. Black ATTENTION! These are painted  black.  Shipped across the world and then to your doorstep. Most black parts in...

Universal High Tension Points Ignition coil w/ Boot - Vespa, Kinetic

Universal points ignition coil. Can be used on 6 or 12 Volt systems, points or CDI set ups. fits Vespa, Piaggio, Ciao, Citta, Grande, Bravo, Kinetic TFR Magnum luna etc, and some Motobecane mopeds...

Used Piaggio Grande Mag Front Wheel, Grimeca Snowflake - Like New

Like new, "used" Piaggio Grande front mag wheel.  AKA snowflake style. Can also be used on Bravo and SI models. Comes with brake plate, shoes and axle /nuts (not shown) View photos closely for...

Universal Biturbo Exhaust, Expansion Chamber and Baffle - No header

Biturbo exhaust expansion chamber and baffle. Use for custom projects where performance exhausts are hard to find.   28mm I.D. for the expansion chamber.. Right hand side mounting...

Metal Measuring Caliper Tool, Micrometer - Analog/Mechanical

Metal Measuring Caliper Tool, Micrometer - Analog/Mechanical. Comes with storage case. opens to 150mm. This is perfect for answering many many questions regarding the sizes on nuts, bolts,...

Universal Exhaust Baffle 28mm ID, Sachs - Chrome

  Universal exhaust baffle. Sachs stock style. Works great on Morini mopeds as well. *No rear mounting nut.Clamp it on with a 28mm header available for Puch, Tomos and Sachs. Can be...

Tomos A55 Biturbo Exhaust - Chrome

Biturbo exhaust for Tomos A55 mopeds. Easy fitment and boost over stock performance.  Designed for the Streetmate, but also works on the A55 models like the Revival, LX, ST, Sprint, Arrow,...

Original Kinetic Magneto Rotor / Flywheel, No Window

New original Kinetic moped CDI magneto rotor aka flywheel. This is the no window version. Can be used on Vespa points cases if using Kinetic coils, magneto rotor, and CDI box. NOT for Vespa CDI...

Tomos / Puch Magnum Fork Complete Headset

Replacement Headset bearing kit for all Tomos mopeds 2001(A35/A55) and newer and similar step thru model mopeds. Please compare first. If you use the 26mm race this headset can be used on a Puch...

NOS Garelli NOI Exhaust - Serpentone Circuit

NOS Serpentone Garelli NOI exhaust.   This circuit / serpentine style exhaust works great on stock to mildly modified builds.  Could also work on similar engined Avanti mopeds. Made...

Puch Tecno Bullet GP Exhaust, Natural

Tecno Bullet, AKA GP  exhaust for Puch mopeds like the Maxi, Newport, Swinger, Dart, Pinto and similar.  Fits on  the Magnum when using a Maxi cylinder kit with flat exhaust port...

Tomos A3 / A35 Biturbo Exhaust - Black

Biturbo exhaust for Tomos A3 / A35 mopeds. Easy fitment and boost over stock performance. Works on A3 and A35 Tomos mopeds besides Revival.  Easy fitment with large performance increase...

Bosch W7AC Short Thread Spark Plug - NGK B6HS Compatible

OEM replacement for Puch powered moped engines, such as the E50, ZA50, Z50.  As well as the Puch / Sears Allstate MS 50, MV50, VS50, DS50.    This short reach spark plug crosses over...

Fuel Petcock 12mm x 1 Rear Flow - Tomos A3/A35

Replacement petcock with on / off / reserve. Fits 5mm fuel line. 12mm x 1mm female thread coupler nut.  works with honda hobbit, camino, PA50, PA50ii and garelli VIP, katia, eureka, gulp and...

Tomos A3 / A35 Bullet Racing Evo-1 Exhaust - RAW

Bullet Racing Evo 1 exhaust for Tomos mopeds. Now in RAW.   Excellent yet quiet(moped quiet) exhaust pipe engineered for response in the Mid to Top range.   Similar design to the...

Red Handle Fuel Petcock 16mm x 1.00mm

Fits Puch magnum, Columbia Commuter,  and any other moped or motorcycle with 16mm x 1mm threading + use this on many different vintage motorcycles like guzzi, betamotor, ducati, fantic motor,...

Puch 50cc 4p Cylinder Kit, DMP 38mm

Works wih any E50 engines found on various Puch engine mopeds like the maxi, newport, magnum, swinger, pinto, freespirit and many others.  Magnum ZA50 engines will need to use a Maxi flat flange...

Motobecane 12v CDI unit for AV7, AV10, AV88 - Includes CDI box.

Works on everything Motobecane: AV10, AV7, and AV88. CDI is the modern stuff that all new bikes run with. This is the CDI that comes on the new MBK AV10 type engines.Includes everything you shown...

Puch 6 Port 50cc Racing Cylinder Kit, 38mm

Works with E50 engines found on various Puch engine mopeds like the maxi, newport, magnum, swinger, pinto, freespirit and many others.  Magnum ZA50 engines will need to use a Maxi flat flange...

Polini Motobecane AV10 Engine Race Case Set

 Polini Motobecane AV10 complete engine case kit.  Reinforced Bearings, seals, two intakes, hardware and gaskets (not shown). Intake is Dealers choice.  Dellorto 19mm SHA or ...

Tomos A3 A35 Laser Exhaust - Chrome

Laser brand exhaust for Tomos A3 / A35 powered mopeds such as the Bullet,  Sprint,  Targa and Targa LX  Specs:25.5mm ID Header.41mm Eye to eye flange holes.48mm Baffle diameter.6mm...

Motobecane 12v CDI unit for AV7, AV10, AV88 - Ver 1

CDI unit for all Motobecane mopeds Version 1. Fits Av7, AV10, 51V, AV88 etc. Just a slight difference. This version has the coil and timing eye in sleek plastic casing.View photos for wiring...

Tomos A3 / A35 Black Laser Sport Exhaust - Chrome Baffle

Black Laser Sport exhaust with chrome baffle for Tomos A3 / A35 powered mopeds such as the Bullet,  Sprint,  Targa and Targa LX . Sport = LOUD.  This one is a screamer Specs:25...

Universal 6V / 12V Ignition Coil with Spark Plug Wire

Universal high tension ignition coil that will work on 6v or 12v points or CDI ignition for mopeds and motorcycles. You may need to fabricate a mount for this coil depending on bolt holes, but many...

Motobecane 12v CDI unit for AV7, AV10, AV88 - Ver 2

CDI unit for all Motobecane mopeds, version 2. Fits Av7, AV10, 51V, AV88 etc. Just a slight difference vs V1. This has a wrapped coil and timing eye. Includes everything you shown.  View...

Tomos A3 / A35 Laser Sport Exhaust - Chrome

Chrome Laser Sport exhaust for Tomos A3 / A35 powered mopeds such as the Bullet,  Sprint,  Targa and Targa LX. Specs:25.5mm ID Header.41mm Eye to eye flange holes.48mm Baffle diameter...

Fuel Petcock 16mm x 1.00mm for Puch Magnum, Kreidler and Sachs Mopeds

Fits Puch magnum and any other moped or motorcycle with 16mm x 1mm threading on / off / reserve fuel flows down - for 6mm fuel line 16mm x 1mm female thread on coupler nut   + use this on...

Tomos A3 A35 Laser Exhaust - Black with Silver Silencer

*Attention: Now comes with Silver Silencer  Laser exhaust for Tomos A3 / A35 powered mopeds such as the Bullet,  Sprint, Targa, Targa LX Specs:25.5mm ID Header.41mm Eye to eye flange...

Tomos A3 / A35 Chopper / Slash Exhaust - Black

 Chopper / Slash side exit exhaust  for Tomos. Easy fitment and boost over stock performance. Works on A3 and A35 Tomos mopeds besides Revival.   Right side mount. ...

Fuel Petcock 16mm x 1.00mm

Top quality OMG petcock Fits Puch magnum and any other moped or motorcycle with 16mm x 1mm threading + use this on many different vintage motorcycles like Sears Allstate, guzzi, betamotor, ducati,...

Tomos A35 Moped Tecnigas Next R Exhaust, Chrome

Tecnigas Next R, one of the best exhausts for Tomos mopeds. Excellent construction and amazing performance are both delivered by Tecnigas quality.Chrome Finnish, Not mirror like. Silencer color...

Puch Tecno Boss Performance Exhaust *Chrome*

Tecno Boss Performance exhaust for Puch E50 mopeds like the Maxi, Newport, Swinger, Dart, Pinto and similar.  Fits on Magnum when using a Maxi cylinder kit with flat exhaust port instead of the...