Original Dellorto gasket set for PHBN carburetors. Comes with shown.
Dellorto Part # 52620
Brass M6 thread 5mm tall.This is the most common nut found on your moped. It is called 6mm, or M6 in metric. If you have a 10mm wrench or socket, and it fits the nut you need, this is it.Used on exhaust studs, head bolts, intakes and e many other...
Universal Cylinder stud set. Includes washers and nuts. Nuts have convenient cap to prevent rust. Will fit Tomos cylinder studs for A35 and A3
4 x 7mm x 115mm cylinder Studs
4 x 7mm Washers
4 x 7mm Nuts w/...
6V 21W single filament bulb. Most commonly used bulb in taillights, also found in some headlights. Check your size and base before ordering, this bulb has many fitments and uses. BA15s or 1156 Base. Same bulb type.
Replacement for Puch #...
Originally made for zundapp + puch.Chrome switch with buttons. Can be wired a number of ways. low beam / hi beam / off. + horn button or Kill button, but can be wired for whatever you want them to do. Chrome metal housing. similar to the original...
New old stock wrench with an 8mm and 10mm end. Very strong and well built tool. These are NOS and may have some light surface rust.Dimensions:Overall length - 116mmhandle thickness - 3mmWrench end thickness - 5mmMade in Austria by Stubai, Part # DIN 895
Classic style pedals with no reflectors for stealth riders. Fits 99% of mopeds.
Comes with left and right pedals.Dimensions:Tip to tip length - 135mmPedal thickness - 23mmPedal width - 72mm*Updated picture coming soon.
Buzzetti Headset made for Piaggio Vespa Ciao Citta mopeds. You must check your specs before ordering as some vespa models have inverted cups. This is known to also fit some Honda Hobbit mopeds. It could even be used to mount different forks on...
Throttle cable originally made by Benelli for the 125cc Cobra.Can be used as a throttle, decomp, or choke cable for other mopeds Such as Motobecane, Vespa, Sachs, Derbi. Black color.This cable can be used for many things on many mopeds. Please compare...
Shinko SR714 80/80 X 16" tire. Very cool wide tire. Could be used as a rear tire on Streetmate or Revival models. * Tire size 80/80 translates to 3.15" Please be to check your current size and clearance area.Specifications:Tubeless Type 4-Ply rating...
Black Lusito Waffle style handlebar grips for 7/8" or 22mm handlebars 4.5 inches long
*Sold per pair
Lusito Waffle style handlebar grips for 7/8" or 22mm handlebars4.5 inches long
*Sold per pair
Protect your headlight and give your motorcycle or moped a mx/madmax look.
Large Grill for large square type headlights such as Honda MT, MTX
4.9" H x 6.8" W
M7 x 102mm Moped Cylinder stud.Sold each.
Diameter: 7mm M7
Part Length: 102mm
Thread Length on each end: 14.5mm & 22.5mm
Please compare yours before ordering
NOS Leleu front wheel OFFSET break plate. Takes 11mm Axles and 80 x 18mm brake pads(Pads included.)
You will notice the mounting angle and side for the brakes is different, these are intended for specific Peugeot Models. Please compare before purchasing...
NOS Leleu front wheel 5 star OFFSET hub. Includes 11mm Axles, hardware, sealed bearings, and 80 x 18mm brake pads.
You will notice the mounting angle and side for the brakes is different, these are intended for specific Peugeot Models. Please compare...