New Kinetic vintage style spark plug boot / cap.Non - resisted type.
Recommended Accessories:Spark PlugsSpark Plug Wire
New Saturnus Headlight for many Italian mopeds and found original on, Kinetic TFR, Tomos Sprint, LX, Targa LX and others.4 prong plug socket includedNo bulbGlass lens is 115mm wide x 75mm high
Replaces Tomos # 227435
Recommended Accessories:Ba20d bulbs
NOS chrome pedal crank arms. Made for Sachs and Columbia mopeds, but works on almost all mopeds, and clears most performance exhausts. Pretty much everything with 16mm sized cranks. Large offsets and long arms
Dimensions:160mm long (L)170mm long (R)47mm...
Replacement piston ring set Tomos A3 mopeds. Fits Puch (except hi-torque late models with L-ring upper), Sachs 504, 505 1A,1B (both) and 1C,1D (lower only) Comes with two rings. 38mm x 2mm FG Always measure and compare before ordering. Tomos # 203300
Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size...
High quality SKF non-sealed bearing Tomos and Motobecane mopeds. Known to fit the right side of Motobecane rear wheels (6200 bearing for left), works on Tomos A35 and A55 clutch covers
Please be sure to measure and compare bearing numbers before...
NOS original Tomos air filter for the Encarwi carburetor.
52mm x 10mmTomos # 200384 *etched into the side of the filter.
Original CEV headlight bulb sockets. Will accept dual filament BA15D Bulbs. Please compare before purchasing. Can be used on many mopeds like Tomos and Kinetic TFR USA.
Dimensions:The outer fin OD is 56mmThe inner ring /lip OD is 37.7mmKinetic...
Quality aftermarket set of breaker points for various Puch powered mopeds with Bosch ignitions. Tomos A35 with Bosch / Iskra points ignition, as well as Batavus.
Tomos # 223164(no wire)
Biturbo exhaust expansion chamber and baffle. Use for custom projects where performance exhausts are hard to find.
28mm I.D. for the expansion chamber..
Right hand side mounting.
Recommended AccessoriesBrass tall nuts
NSK L17 brass bearing. Used For Tomos A3 crank cases. Also used in Puch ZA50 engines on the magneto side(left.)**Be sure to compare before purchasing.Dimensions:17mm I.D.40mm O.D.10mm WidthTomos # 044370
NOS CEV 210 Tail light lens for 19845 Tail light base. Orange side reflectors.Use this on Tomos, Puch, and many other mopeds. Even motorcycles like the Ducati pantah 500 & 600.Puch # 3492553062 - 3126.96.36.1996.2Tomos # 213452
NOS Tomos magneto / Flywheel cover for A35 equipped pedal start mopeds.This is the threaded inlet style cover.This does not have a hole for kick start and does not have the raised area for an electric start.
Tomos Part # 222387Fitments:92-93 A35...
New old stock Osram 6 Volt 10 Watt light bulb. Universal applications. SV8.5 Festoon Base.
*Check your size and voltage before ordering. 42.5mm Long x 10mm Diameter
Made in Germany.
NOS Osram 6Volt 10Watt light bulb. Most commonly used in taillights. BA15s Base
*Check your size and voltage before ordering.
Made in Germany.
Original CEV brand that has traveled through time. The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles. This bulb is 6V 25W/25W.*Please compare yours before purchasing.Dimensions:Dome - 34.5mm...