Original Kinetic M8 x 1.25 thread Hex head flat style nut. 17mm head6.3mm thick
Original Kinetic output shaft for the rear Transmission / gearbox, includes the pin. *Specific to Kinetic rear gearboxes. Splined shaft14mm threads
Kinetic #03119140(shaft), 03035080(pin)
Original Kinetic M8 x 1.25 thread Hex style clutch nut.*Nut is beveled on the other side to seat with the shape of the clutch.
17mm head8mm thick
Kinetic # 03168080
New original Kinetic moped NON - variating gear box. Made for NON - variating models such as the TFR, TFR USA. Luna, etc.Key differences between a variating and non variating:Variated uses long shaft with woodruff key near threading.Non variated uses a...
New original Kinetic moped variating gear box. Made for variating models such as the Magnum.Key differences between a variating and non variating:Variated uses long shaft with woodruff key near threading.Non variated uses a short shaft with woodruff key...
Original Kinetic cogged V-belt. Rofan ZX 954mm drive belt for non variated Kinetic TFR models. Will also fit Vespa Piaggio Ciao mopeds. For use on 95mm Pulleys.
Kinetic # 03042040Made in DenmarkDimensions:10.3mm W x 6.5mm H x 954mm L
New original 85mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. If you have the 95mm then this will give you more top speed. This is the smooth round 11mm hole with a Woodruff keyway version.Black.
Please be sure to...
Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing.
Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit.
10mm W x 8mm H x 950mm L
Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds.
New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black.
Please be sure to compare before purchasing.
New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest.
*You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the...
New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one.
new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds.
*You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600
OEM metal pedal crank arm bushing for Kinetic TFR USA, Luna, and Magnum mopeds. You need one for each side of the pedal crank.
Dimensions:16mm Inner Diameter21mm Outer Diameter25mm Collar OD15mm Overall Length
Kinetic # 03354500...
Original starter weights for Non-variated TFR Kinetic mopeds. Kinetic Part #03029450,
Upgraded version available > here <