Non Dellorto brand dellorto carburetor rebuild kit for the PHVA /PHBN style carbs.Includes: float, float pin, needle float bowl o ring, (3) other o rings, and needle clips.
Kenda K252 16" x 2.25" White Wall tire 2 ply sidewallGreat classic upgrade for most Tomos models and many other mopeds with 16" wheels.
Tube Type E11 Approved240lb weight ratingSpeed rated 31L (75 mph)33 psi
Left side axle / wheel adjuster / drive chain tensioner for Avanti and Cosmo Mopeds like the Stinger.
Will fit many other makes like Sacsh and Tomos with 11mm or 12mm axles.
Right Side Chain...
14" x 80/80 moped tire. Excellent budget tire for those rougher roads where traction is required. Great looking tread pattern.
Deestone Tires was established in the early 80s in Thailand. Today Deestone makes a selection of industrial, agricultural,...
New Kinetic vintage style spark plug boot / cap.Non - resisted type.
Recommended Accessories:Spark PlugsSpark Plug Wire
New Saturnus Headlight for many Italian mopeds and found original on, Kinetic TFR, Tomos Sprint, LX, Targa LX and others.4 prong plug socket includedNo bulbGlass lens is 115mm wide x 75mm high
Replaces Tomos # 227435
Recommended Accessories:Ba20d bulbs
NOS chrome pedal crank arms. Made for Sachs and Columbia mopeds, but works on almost all mopeds, and clears most performance exhausts. Pretty much everything with 16mm sized cranks. Large offsets and long arms
Dimensions:160mm long (L)170mm long (R)47mm...
Dellorto PHVA starter / choke jet. This only affects cold starting when the choke is on. If the choke is on and your moped doesn't start well and all other options have been checked, you may need to up-jet this. At this time we only have size...
High quality SKF non-sealed bearing Tomos and Motobecane mopeds. Known to fit the right side of Motobecane rear wheels (6200 bearing for left), works on Tomos A35 and A55 clutch covers
Please be sure to measure and compare bearing numbers before...
Biturbo exhaust expansion chamber and baffle. Use for custom projects where performance exhausts are hard to find.
28mm I.D. for the expansion chamber..
Right hand side mounting.
Recommended AccessoriesBrass tall nuts
NOS CEV 210 Tail light lens for 19845 Tail light base. Orange side reflectors.Use this on Tomos, Puch, and many other mopeds. Even motorcycles like the Ducati pantah 500 & 600.Puch # 3492553062 - 3184.108.40.2066.2Tomos # 213452
NOS Tomos magneto / Flywheel cover for A35 equipped pedal start mopeds.This is the threaded inlet style cover.This does not have a hole for kick start and does not have the raised area for an electric start.
Tomos Part # 222387Fitments:92-93 A35...
New old stock Osram 6 Volt 10 Watt light bulb. Universal applications. SV8.5 Festoon Base.
*Check your size and voltage before ordering. 42.5mm Long x 10mm Diameter
Made in Germany.
NOS Osram 6Volt 10Watt light bulb. Most commonly used in taillights. BA15s Base
*Check your size and voltage before ordering.
Made in Germany.
Original CEV brand that has traveled through time. The BA20D bulb is used for the headlight and taillights of many model mopeds and motorcycles. This bulb is 6V 25W/25W.*Please compare yours before purchasing.Dimensions:Dome - 34.5mm...
Translucent green polyurethane oil injection line for mopeds and many smaller motorcycles, such as Garelli, Puch Magnum, and Tomos. Can also be used for the air injection on your intake or carburetors.
The hose has a 2.5mm I.D. with a...