Moped Make / Model

NOS CEV 210 Tail Light Lens for Puch / Tomos and more

CEV 210 Tail light lens for 19845 Tail light base.Use this on Tomos, Puch, and many other mopeds.  Even motorcycles like the Ducati pantah 500 & 600. *Does not have orange sides* Puch Part # 3492553062  - 349.4.55.806.2 Made in...

NOS CEV 210 Tail Light Assembly for Puch Tomos and more!

CEV Tail light assembly! Real NOS CEV product. This is the 210 Lens with a 19845 Base. Use this on Tomos, Puch, and many other mopeds. Consider this a universal tail light.* Red sides Uses Ba15s bulbs Use on 6 or 12 volt systems.  Puch #...

Mikuni TM24 Flatslide Spigot Carburetor

High quality Mikuni performance. Great carburetor for many heavily modified applications using a 70+ cc kit . Uses the same jets as the VM series carb. 44mm OD filter mount.31mm OD Spigot mount*Typically supplied with#130 main jet.#15 Piolet jet...

Inner Tube pair 2.25 / 2.50 - 16 for Tomos & Kinetic

Quality motorcycle or moped tube.  Tubes will fit 2.25"- 2.50" tires on 16" rims. Such as the Tomos Bullet, Targa, Targa LX, Sprint, ST, Classic, TT, streetmate, revival, and many more. *This kit includes TWO of these tubes, one for each wheel.

Puch DMP 45mm 70cc Complete Cylinder Kit

Giant transfers and 6 cylinder ports will give you a huge boost over stock and you will be doing over 50mph with proper tuning.  Light weight aluminum with Nikasil plating for long lasting usage and reliability. Works with all E50 engines found on...

Inner Tube pair 2.00 / 2.25 - 16 for Tomos *front and rear*

Quality motorcycle or moped tube.  Tubes will fit 2.00"- 2.25" tires on 16" rims. Such as the Tomos Bullet, Targa, Targa LX, Sprint, ST, Classic, TT, streetmate, revival and many more. *This kit includes TWO of these tubes, one for each wheel.

Sedona Inner Tube pair 2.25 / 2.50 - 14 for Honda *front and rear*

High quality 2.25- 2.50 x 14" Sedona brand motorcycle or moped tube.    Talcum powder coated for easy installation. Tubes will fit 2.25"- 2.50" tires on 14" rims. Such as the Honda NA/NC50 Express NU50 Urban...

Puch ZA50 Complete Original Starter Cable Assembly

This is a new original Puch Starter cable for your ZA50 engine.Made for the starter assemblies that accept cable barrel ends, NOT the screw in type. 41" overallRecommended Accessories:Adjuster ( Control End) **No longer included

Headlight Bulb 6V 15/15/W PX15D Base

Quality dual filament lightbulbs. Can be used as a headlight. 6 volt 15/15 watt T19 bulb with a PX15D base (P15D25-1) Base is 15mm diameter, Tab/Flange is 25mm. Glass is 19mm diameter. Overall length is 41.5mm.   *Known to fit many Honda models...

Sedona Inner Tube pair 2.25 / 2.50 - 17 for Puch *front and rear*

High quality Sedona brand motorcycle or moped tube.  Talcum powder coated for easy installation   For 17 x 2.25 to 2.5in tires. Great fo Puch Maxi, Magnum, and Newport mopeds. Also found on most Peugeot, and Motobecane mopeds...

Sedona Inner Tube pair 2.00 / 2.25 - 16 for Tomos *front and rear*

High quality Sedona brand motorcycle or moped tube.  Tubes will fit 2.00"- 2.25" tires on 16" rims. Such as the Tomos Bullet, Targa, Targa LX, Sprint, ST, Classic, TT, streetmate, revival and many more. Talcum powder coated for easy...

Puch Logo, Med. round decal - 3"

3" Puch logo sticker with thin text and a rounded shield. 

Puch Logo, Large round decal *style 1*

Puch logo sticker with large text and a pointed shield. 94mm or 3.7 inch diameter.

Tomos OEM Black Pedal Arm Set 230292

Original Tomos Black pedal arms. Normal 9/16 moped pedal thread, normal size 16mm pedal crank.  Can be used on other mopeds tooComes with left and right pedal arm as shown.165mm Total Length 25mm Offest Uses 9.5mm pedal arm pins...

Honda Camino / PA50 6v ignition coil with condenser

6v ignition coil with a condenser made for the Honda Camino and PA50.  While they are nearly identical to the PA50 Hobbit, some parts are different. These mounting holes may not line up with yours. Measure and compare yours first.  Or be...

Puch E50 Engine Hardware Set

Hardware set for your Puch E50 powered mopeds like the Maxi, etc. Zinc plating for rust resistance. Package includes:  (8) M6 x 31mm, (5) M6 x 55mm engine case allen bolts (4) M6 x 25mm clutch cover countersunk allen bolts (2) M6...

Steyr-Daimler-Puch Logo Decal

Steyr-Daimler-Puch Logo Sticker. 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Homeland Sticker Mixer

(1) One awesome little Puch logo sticker. 45mm or 1.77 inch diameter. (2) Puch text above the Steyr Coat of Arms. This is from way back, Looks great! 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide. (3) Puch moped logo inside...

Puch Eagle Wings Decal

Another sweet throw back sticker.This is the Austrian national bird the black eagle. 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Text Above Steyr Coat of Arms Decal

Puch text above the Steyr Coat of Arms. This is from way back, Looks great! 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Logo inside Austrian flag Decal

Puch moped logo inside of the Austrian flag. Represent your moped's homeland.  86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Logo, Small round decal - 2"

One awesome little Puch logo sticker. 2" diamter

Intake Gasket - 21mm Inner Diameter for Derbi, Minarelli, and Puch

This gasket is used on Minarelli, Derbi, and Puch PISTON PORT engine equipped mopeds.   Super duper tech specs: 21mm ID x .01 thick x 38mm center eye to center eye... 25mm inner eye edges and 44mm outer eye edges.

Puch 70cc AJH Reed Valve Gasket Set

Quality gasket set for the AJH cylinder kit. Includes: Intake, base, head, and exhaust gaskets.   Recommended Accessories: Puch 70cc AJH Cylinder kit

12mm Bing Clone Carburetor for Puch (style 2)

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to swap the orginal atomizer with your old...

CEV Headlight Bezel for all standard CEV Buckets 04522

CEV Headlight rim/bezel. 105mm  Fits all CEV bullet and standard headlight buckets, as found on Puch, Peugeot, Italian bikes, and many more. Part # 04522 and or CEV # 105 Made in Italy Recommended Accessories : 6v Sealed Bulb 12v Sealed...

Honda Hobbit 1mm Base plate spacer

1mm thick metal base gasket can be used with any cylinder kit for the hobbit or camino. *Athena and Aluminum 70cc kits need this spacer for proper fitment.   Fits: PA50I, PA50II, Camino / Hobbit, PX50.  Also will fit the NC and NU50 Express...

CEV Keyed Ignition Switch

CEV keyed ignition switch for your moped or small motorcycle project. Came stock on a large amount of mopeds including Vespa models. Nice and classic.   Sized to fit in holes 12.5mm up to 16mm.

Puch VDO Style Speedometer Drive. *Right*

Generic VDO style speedometer drive for Puch mopeds. 12mm axle hole10mm cable threadsFits 1.6mm speedo cable *Measure and compare yours for best fitment. Right hand Fitment.  

Kenda Inner Tube 2.75/ 3.00 - 16"

Quailty  Kenda brand inner tube. Tube will fit 2.50"- 3.00" tires on 16" rims. Such as the Tomos and many more.   Recommended Accessories: Tire Iron Rim Protectors

Vee Rubber Inner Tube 2.50/ 2.75 - 14" Moped Tires

Quailty Vee Rubber brand inner tube. Will fit 2.50"- 2.75" tires on 14" rims.   Recommended Accessories: Tire Iron Rim Protectors

11mm x 200mm Loose Bearing Axle Complete Kit

Comes with axle, caged wheel bearings, cones, nuts and washers.  Perfect for Puch front or rear wheels.  Snowflake, spokes, five stars.   Will also work on many other applications.  Measure first buy second.  11mm diameter x...

NOS CEV Puch Maxi / Newport Headlight *Grey*

 Super rare NOS original CEV rectangle / Euro style headlight. This  version was normally found on Puch Maxi / Newport,  Solo, Moto Guzzi, Benelli,  Zundapps and Hercules mopeds.  Can be used with many other mopeds...

NOS CEV Puch Maxi / Newport Headlight *baby blue*

Super rare NOS original CEV rectangle / Euro style headlight. This  version was normally found on Puch Maxi / Newport,  Solo, Moto Guzzi, Benelli,  Zundapps and Hercules mopeds.  Can be used with many other mopeds.  Bolt...

NOS Foxi / KTM Moped CEV Wiring Harness and Switch

New Old Stock CEV wiring harness for Foxi mopeds and the KTM Hobby.   These specifically are from the European sold KTM Hobby, but can be mated to work with the U.S. sold Foxi Deluxe,  Baron, and classy Salzburg or another custom built ride...

NOS Foxi / KTM Moped CEV Headlight and Wiring Harness

New Old Stock CEV 5"  Headlight and wiring harness for Foxi mopeds and the KTM Hobby.   These specifically are from the European sold KTM Hobby, but can be mated to work with the U.S. sold Foxi Deluxe,  Baron, and classy Salzburg or...

CEV 2152u 5" Headlight. Low / High Beam Non-Sealed Type

New Old Stock CEV  Headlight.  Extremely rare dual filament, high low beam type.  Fits most mopeds and is 5" wide mount to mount.  Like Puch,KTM,  Foxi and many others. BULBS NOT INCLUDED Top qualtiy metal head light...

Tomos 31T Rear Sprocket A3 A35 A55 Mopeds

31T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare if needed. Color of sprocket may vary depending on stock. Aluminum or coated finish. Use this larger rear sprocket with a smaller front sprocket to help with...

NGK BP7HS Spark Plug

NGK BPHS spark plugs are 14mm short thread with extended electrodes.  Numbers correspond to the temperature of the spark. 5 is the hottest and 10 is the coolest. stock mopeds will generally run a 5 or 6, kitted mopeds maybe a 7 or 8, high...

Tomos 33T Rear Sprocket A3 A35 A55 Mopeds

33T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare if needed. Color of sprocket may vary depending on stock. Aluminum or coated finish. Use this larger rear sprocket with a smaller front sprocket to help with...