Stud and nut kit to install your Tomos, Puch or similar exhaust.
This kit includes:(2) Nuts 12.5mm Long(2) Studs M6x 32mm Long
Tall M6 x 12.5mm steel exhaust nuts. Can also be used on most intakes.
6mm engine studs fit almost all cylinders and kits...
Original NOS Minarelli V1 cylinder stud. Sold per piece. M6 x 135mm with 16mm of threading on each side.
Sachs cylinder stud for the 504 engine.
The stud is 7mm, the threads are 8mm and it is a flat head screw driver top.
*Sold each*Please be sure to compare before purchasing
Thread Diameter: 8mm
Part Length: 104mm
NOS Cylinder stud for Vespa, Piaggio, Kinetic mopeds. Sold each.
Please compare yours before ordering
Hardware set for your Puch E50 powered mopeds like the Maxi, etc. Zinc plating for rust resistance.
(8) M6 x 31mm, (5) M6 x 55mm engine case allen bolts
(4) M6 x 25mm clutch cover countersunk allen bolts
Stainless steel hose clamp by Malossi. Made for intakes, but can be used on exhaust shields, brackets, header wrap etc.
25- 50mm Diameter
Malossi Part #111-6220
Rubber Intake Coupler
Trail Tech TTO Universal Handle Bar Mounting Bracket. Fits 7/8" to 1 1/4" handlbars to easiy attach either your Tach or Temperature gauge and makes them easy to see. Trail Tech # 72-PK02
Tomos cylinder studs for A55, A35 and A3
4 x 7mm x 115mm cylinder Studs
4 x 7mm Washers
4 x 7mm Nuts
*Will not work with stock A55 heads using m7 x m6 studs. Must compare before purchasing.
Make your NSR50, NS-1, MB5, MC28, NSR250 into a race machine. Remove the kickstart mechanism and replace with this seal. #12 in picture.
Honda OEM Part # 90112-GT4-000 Fairing screw for the Honda NSR50, NSR50R AND NSF100. #16 on Picture.