128 results for 20mm shock

Dellorto SHA Carburetor Float Bowl M4 Screw / Bolt - 20mm

  Dellorto SHA float bowl / chamber screw bolt. Includes washer. Fits all(12-16) SHA carb bowls. Dimensions:M4 threading20mm overall length

Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome

New LEFT chrome pedal crank arm for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.   *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of...

Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome

New RIGHT hand side chrome pedal crank arm for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.   *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the...

Cable Adjuster M6 X 20mm Threading - No Slot *Sold Each*

Universal M6 cable adjuster for many moped applications, NO slot. Please check and compare yours before purchasing.For use up to 6mm thick cable housings. Dimensions:6mm threading20mm long...

Original Kinetic Magnum Front Fork Boot / Dust Cover - Sold Each

Original Kinetic Magnum and TFR USA shock bellow, dust cover, boot. Not intended for the older "TFR" models, "TFR USA" starts around 2005 and newer. Could be used on other projects, check specs below...

80mm x 20mm Brake Shoes w/ Springs - Offset

New 80mm x 20mm brake shoes with springs included. This for non Leleu branded wheels that require an offset style brake shoe.Will fit some 1977 50V models.Replaces Motobecane number  81708A

Original Tomos Front Brake Plate w/ 105mm x 20mm pads & 12mm axle

NOS Tomos brake hub assembly. Brake pads included are 105mm x 20mm. Axle is a 12mm w/ 11mm threads   Tomos # 229752

Racing Slotted Brake Shoes, Open End w/ Springs 80mm x 20mm

Quality slotted aka grooved performance brake pads for mopeds requiring 80mm x 20mm shoes. Depending on brake plate style and hub diameter these will generally will fit, Puch Spoked or Five Star...

20mm Intake for Bolt on Mikuni 16-18mm Carburetors, Honda MB5, NS-1 NSR50

Replacement MB5 Intake for bolt on Mikuni flange style carburetors 16-18mm only. Oil injection or boost bootle inlet on side. Can be capped off if not need.  Fits: MB5, NSR50, NS-1 and similar...

Puch Maxi EBR Front Forks Assembly - Black

EBR forks for Puch Maxi, Pinto, etc. Excellent upgrade. Dimensions:26mm x 1 Threading28mm Fork Tube OD59cm(23 1/4") total length(Top Bolt to Drop out)M

Puch Magnum EBR Front Forks Assembly, Reinforced - Chrome

Chrome EBR forks for Puch Magnum and Freespirit mopeds. Excellent upgrade for any Puch Maxi or Pinto as well.Overall more stable due to reinforcement in design, also gives a small lift (10cm) to the...

Puch Magnum EBR Front Forks Assembly, Reinforced - Black

Black EBR forks for Puch Magnum and Freespirit mopeds. Excellent upgrade for any Puch Maxi or Pinto as well.Overall more stable due to reinforcement in design, also gives a small lift (10cm) to the...

Puch Maxi EBR Hydraulic Forks, Disc or Drum - Black

Heavy duty hydraulic EBR forks for Puch Maxi, Newport and similar platforms  Ready for disc or drum brakes. Up to you. Hydraulic oil dampening for smooth and controlled riding.  They are a little...

80mm x 20mm Brake Shoes Open End with Springs

New brake shoes with springs included. Depending on brake plate style and hub diameter these will generally will fit, Puch Spoked or Five Star wheels,  Peugeot and Motobecane spoked wheels, Leleu...

Heavy Duty 280mm Rear Shocks

Heavy duty Black and Chrome rear adjustable shocks for Tomos and many other mopeds. 280mm is standard size for Tomos, Garelli and many others.  Measure and compare for others.Adds 50lbs carrying...

NOS 280mm Chrome Shock Set 8mm & 10mm Eyelets

Replacement 280mm long chrome on chrome adjustable shocks for many mopeds and motorcycles.   Measure yours from eye to eye and compare. Some mopeds you can go a little longer or shorter for more or...

NOS Original Puch Maxi Fork Set - Silver

NOS original forks for Puch mopeds. This will fit the Maxi, newport and similar models.  Nice silver paint and rust free chrome. 

Vespa Piaggio Cylinder Stud m7 x 120mm *each*

Cylinder stud for Vespa, Piaggio, Kinetic mopeds.  Sold each.Please compare yours before orderingDimensions:M7 Threads120mm Long  

Complete Cylinder Stud Set M7 x 120mm - Tomos/Kinetic/Piaggio

cylinder studs for Tomos A55, A35 and A3, as well all Vespa Piaggio and kinetic moped models. Includes: 4 x 7mm x 12omm cylinder Studs 4 x 7mm Washers 4 x 7mm Nuts *Will not work with stock...

Mikuni VM20 Carburetor Clone

20mm VM20 Mikuni Clone Carburetor. Can be used on the Honda MB5, NSR50 and NS-1 motorcycles with the 20mm intakes. 43mm OD air filter mount. Uses Mikuni M28/1001 idle jets and Keihn Main jets.

Honda Hobbit / Universal Moped Cylinder Stud m6 x 120mm *each*

Cylinder stud for Honda Hobbit mopeds.  Sold each. Please compare yours before ordering. M6 Threads x 120mm Long *Use maximum 5ft lbs of torque*  

12mm Bing Clone Carburetor for Puch

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to...

Original 15mm Bing Carburetor for Puch

Great replacement and upgrade for your Puch moped.  Original German made quality. Comes with 82 main jet which is better suited for 70cc setups.  Make sure to pick up smaller jets for stock or less...

Puch Bing Metal Mesh High Flow Air Filter

Chrome metal mesh high flow air filter made for  for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers*

44mm 60cc FG Chromed Piston Ring Set for Honda Hobbit PA50

Honda Hobbit eplacement 60cc chromed piston ring for this replacement Piston Kit only. (the piston rings on the new versions of the cylinder are smaller) Also fits the Yamaha YT60 60cc cylinder Use...

Universal Mini Metal Decomp Lever - Chrome

Motobecane Tank Badge / Emblem Set (1 pair)

Replacement tank badges / emblems for your motobecane moped.  Dimensions:135mm Long20mm Wide5mm Thick

12mm Bing Clone Carburetor for Puch (style 2)

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to...

Pedal Conversion Waffle Style Foot Pegs - 16mm *Sold as a Pair

 Aluminum foot pegs with a waffle pattern. Remove your pedal arms for exhaust clearance or give your moped a motorcycle feel.Fits up to 17mm shafts and is secured with an Allen set screw. Fits most...

Minarelli AM6 Flywheel Nut - M10 x 1.25mm

Replacement Flywheel nut for Minarelli AM6 engines. Dimensions:M10 x 1.25mm threading20mm Long15mm Hex

Original Tomos " A35 " Decal - Blue with silver outline

NOS Sticker for your moped. Dark blue with a dark silver outline.   Dimensions 45 x 20mm tomos # 227739

Honda PA50 Hobbit Cast Iron 60cc Cylinder Kit 44mm

Great little upgrade over stock.  Fits like a stock cylinder, but with a boost of 10 additional cc of power.  Piston now comes with port windows for even more performance Fits: PA50II, Camino /...

Sachs 10mm Bing Clone Carburetor - Square

Bing clone 10mm square carburetor for some Sachs 504 / 505 mopeds.*No shim Fits 20mm intakes.**Be sure to compare first.

Sachs 12mm Bing Clone Carburetor - Square

Bing 85 clone 12mm square carburetor for some Sachs 504 / 505 mopeds. Fits 20mm intakes. Comes with a 52 Main Jet

NOS Tomos Black M6 Cable Adjuster

NOS slotted cable adjuster for Domino / Tomos and others with 6mm thread type. Total Length = 30.5mm Thread length = 20mm   Tomos # 229556  

Honda Hobbit, Camino, PX50 44mm Piston kit - 10mm

Replacement piston kit for the 60cc 44mm Honda Hobbit / Camino cylinder kit10mm wrist pin. Comes with everything shown. 

Honda PA50 Hobbit Autisa 60cc Cylinder Kit 44mm

Autisa brand 44mm cylinder kit. It's aluminium with a cast iron sleeve. Fits like a stock cylinder, but with a boost of 10 additional cc of power.  Fits: PA50II, Camino / Hobbit, PX50, QR50.  Also...

Kinetic Original Front Brake Plate Spacer / Bushing

Kinetic original front brake plate spacer / bushing. Fits TFR, TFR USA, and Magnum models. Dimensions:12.5mm ID20mm OD17mm Wide

15mm Bing Clone Carburetor for Puch

Great replacement and upgrade for your Puch moped.  Top quality clone replica of the original Bing found on Puch, Jc Penny, Sears, Bombardier, Murray and similar Puch based mopeds.. Comes with 82...

Motobecane Tank Badge / Emblem - Single

Replacement tank badge / emblem for your motobecane moped. You will receive one unless your order two. Dimensions:135mm Long