NOS Original Saturnus moped headlight found original on many 1989-2013 Tomos mopeds, and many others.Tomos # 227100(This replaces the bucket only - not the lens, or bulb, or socket.)
*Please compare before purchasing. This is not the CEV...
NOS CEV 8691 glass headlight lens. many Italian motorcycles and mopeds of the 50s and 60s including Montgomery Wards (Benelli) 125cc and 175cc, Benelli / Motobi 125cc 200cc 250cc 'egg motor' bikes, Harley Aermacchi Sprint, the Sears Gilera...
Original NOS Fast Arrow plastic headlight lens with bezel for the Honda Camino. All plastic. Non-Running lamp style. No socket or bulb. 138mm or roughly 5.4 inches. Part # 056141
Will accept dual filament BA20D Bulbs.Can be used on many mopeds like Sachs, Hercules, Kreidler, and Eagle as well as some motorcycles and scooters like the Puch Lido, Maico, KTM, and Zundapp. Please compare before purchasing. *This is not the...
Original German made Puch Headlight Made by Niox. Puch logo stamped into the lens, high quality plastic lens. Very nice piece. Includes a 6v 15w P26S bulb, but you can also run a 12v. Fits Puch Dart known as the Mini Maxi in Europe, 1984-86...
New Old Stock CEV Headlight with CEV-215 glass lens. Fits most mopeds and is 5" wide mount to mount. Like Puch,KTM, Honda PX50(European model), Foxi and many others.Amber 6V-6Watt bulb included. Replacements below.
Top quality, made in...
Non-sealed Headlight socket Clip for CEV headlights.
Puch Part # 322.214.171.1247.1
CEV 2157B Headlamp found on some models of: Batavus, Beta, Bianchi, Cimatti, Fantic, Garelli, Intramotor, Italjet, Malaguti, Motron, Negrini,...
Universal chrome headlight bracket mounts made by EBR.
These mounts fit forks 28-30mm in diameter and have a 3.25 inch reach.
You receive two as pictured. One will be upside down.
Universal chrome headlight bracket mounts. These mounts fit forks 28-30mm in diameter and have a 2.5 inch reach.
You receive two as pictured.
New old stock non-sealed CEV 171 headlight lens. Use these on many CEV buckets and others that take a PAR36 type bulb.
6v or 12v. Up to you. It can be used for dual beam application as well when used with a 1178 universal socket found...
Euro style headlight. This version was normally found on Puch Maxi / Newport, Solo, Moto Guzzi, Benelli, Zundapps and Hercules mopeds. Can be used with many other mopeds.
Bolt hole moutning widith is 116mm about 4.56"...
Protect your headlight and give your moped a mx/madmax look.
Large Grill for large square type headlights such as Honda MTX and MBX
4.3" H x 6.2" W
Round moped headlight visor made for 5" round headlights. You need to loosen or remove the chrome ring and slide the lip on the visor underneath then tighten and you are good to go.
Protect your headlight and give your motorcycle or moped a mx/madmax look.
Large Grill for large square type headlights such as Honda MT, MTX
4.9" H x 6.8" W
Will accept BA20D Bulbs.
Used on many mopeds, but mostly found on Tomos.
Tomos # 227102
Includes only what is seen in picture.
Original Tomos Headlight
5" round head for many mopeds. Such as the Puch Maxi, Magnum, Newport, Tomos, Garelli and loads more. Does not come with bulb, but does come with mounting hardware and a ground wire. Mounting width is 5.25"Takes BAX15D or BAY15D Style...